Liste des publications

Affiche:






Enregistrements trouvés: 921
B. Crabbé, J.-J. Marigo, E. Chamberland, J. Guilié (2017), , Comptes-rendus du 13ème Colloque National en Calcul des Structures, Giens, France, pp. 7.
M. Fréchette, J. M. Urquiza, G. Daigle and D. Rioux-Gagnon (2016), Clearance rate regulation in mussels: adding the effect of weston level to a model of internal state-based regulation, J. Experimental Marine Biology and Ecology, 475, pp. 1-10.
A. Jendoubi, J. Deteix, A. Fortin (2016), A simple mesh-update procedure for fluid–structure interaction problems, Computers & Structures, 169, pp. 13--23.
B.Crabbé1 , J.-J. Marigo, E. Chamberland , J. Guilié (2016), Gradient damage models in large deformation, Conférence CFRAC, Nantes, France.
Fortin, A. and Briffard, T. and Garon, A. (2015), A more efficient anisotropic mesh adaptation for the computation of Lagrangian coherent structures, Journal of Computational Physics, 285, pp. 100 - 110.
A. Fortin, A. Jendoubi et J. Deteix (2015), Numerical modelling of fluid-structure interactions, VI International Conference on Computational Methods for Coupled Problems in Science and Engineering COUPLED PROBLEMS 2015, B. Schrefler, E. Oñate and M. Papadrakakis, Venise, Italie, (Note: À paraître).
S. Léger, J. Deteix, A. Fortin (2015), A Moore-Penrose continuation method based on a Schur complement approach for nonlinear finite element bifurcation problems, Computer & Structures, 152, pp. 173–184.
Gabrielle Martin-Fortier (2015), Mathématiser l'imprévisible ; comment mettre en équations des phénomènes biologiques, (Note: Projet de fin d'études).
A. S. Tora, X. Rovira, I. Dione, H.-O. Bertrand, I. Brabet, Y. De Koninck, N. Doyon, J.-P. Pin, F. Acher and C. Goudet (2015), Allosteric modulation of metabotropic glutamate receptors by chloride ions, The FASEB Journal, (Note: Publié en ligne).
D. Fortin, P-L. Buono, O. J. Schmitz, N. Courbin, C. Losier, M-H St-Laurent, P. Drapeau, S. Heppell, C. Dussault, V. Brodeur and J. Mainguy. (2015), A spatial theory for characterizing predator-multiprey interactions in heterogeneous landscapes, Proceedings of the Royal Society of London B: Biological Sciences, (Note: Accepté).
Dione, I. (2015), Towards optimal finite element error estimates for the penalized Dirichlet problem in a domain with curved boundary, Computers and Mathematics with Applications, (Note: Accepté).
Bernardi, C. and Maarouf, S. and Yakoubi, D. (2015), Spectral discretization of an unsteady flow through a porous solid, Calcolo.
Bernardi, C. and Maarouf, S. and Yakoubi, D. (2015), Spectral discretization of Darcy’s equations coupled with the heat equation, IMA Journal of Numerical Analysis.
Yakoubi, D. (2015), Finite element discretization of the Stokes and Navier-Stokes equations with boundary condition on the pressure, SIAM Journal on Numerical Analysis, 53(3), pp. 1256-1279.
J. M. Urquiza, A. Garon, M-I. Farinas (2014), Weak imposition of the slip boundary condition on curved boundaries for Stokes flow, Journal of Computational Physics, 256, pp. 748-767.
A. Jendoubi, D. Yakoubi, A. Fortin, et C. Tibirna, (2014), An immersed boundary method for fluid flows around rigid objects, International Journal Numerical Methods in Fluids, 75(1), pp. 63--80.
I. Dione, J. Urquiza (2014), Penalty finite element approximation of Stokes equations with slip boundary conditions, Numerishe Mathematik, (Note: Accepté).
Belhamadia Y., Fortin A. et Bourgault Y. (2014), On the Performance of Anisotropic Mesh Adaptation for Scroll Wave Turbulence Dynamics In Reaction-Diffusion Systems, Journal of Computational and Applied Mathematics, 278, pp. 233--246.
Léger, S. and Fortin, A. Tibirna, C., Fortin, M. (2014), An actualized Lagrangian formulation with automatic remeshing for large deformation problems, International Journal for Numerical Methods in Engineering, 100(13), pp. 1006-1030.
Deteix, J. Jendoubi A., Yakoubi D. (2014), A Coupled prediction scheme for solving the Navier-Stokes and convection-diffusion equations, SIAM Journal on Numerical Analysis, 52(5), pp. 2415–2439.
R. Castelli, J.-P. Lessard et J.D. Mireles James (2014), Parameterization of invariant manifolds for periodic orbits (I): efficient numerics via the Floquet normal form, SIAM Journal on Applied Dynamical Systems, (Note: Accepté).
J.-P. Lessard, J.D. Mireles James et C. Reinhardt (2014), Computer assisted proof of transverse saddle-to-saddle connecting orbits for first order vector fields, Journal of Dynamics and Differential Equations, 26(2), pp. 267-313.
J.-P. Lessard et C. Reinhardt (2014), Rigorous numerics for nonlinear differential equations using Chebyshev series, SIAM Journal on Numerical Analysis, 52(1), pp. 1-22.
Fréchette M., Urquiza J.M., Daigle G., Maheux D., Dumais J.-F. (2013), Self-thinning dynamics in experimental scallop populations, Aquaculture International, 21(3), pp. 539-551.
Dione I., Tibirna C., Urquiza, J., (2013), Stokes equations with penalized slip boundary conditions, International Journal of Computational Fluid Dynamics, 27(6-7), pp. 283-296.
D. Fortin, P.-L. Buono, A. Fortin, N. Courbin, C. Tye Gingras, P. R. Moorcroft, R. Courtois, C. Dussault (2013), Movement responses of caribou to human-induced habitat edges lead to their aggregation near anthropogenic features, The American Naturalist, 181(6), pp. 827--836.
R. Castelli et J.-P. Lessard (2013), Rigorous numerics in Floquet theory: computing stable and unstable bundles of periodic orbits, SIAM Journal on Applied Dynamical Systems, 12(1), pp. 204–245.
M. Gameiro et J.-P. Lessard (2013), Efficient rigorous numerics for higher-dimensional PDEs via one-dimensional estimates, SIAM Journal on Numerical Analysis, 51(4), pp. 2063-2087, (Note: Accepté).
R. Castelli et J.-P. Lessard (2013), A method to rigorously enclose eigenpairs of complex interval matrices, Applications of Mathematics, Springer, Acad. Sci. Czech Repub. Inst. Math., Prague, (Note: Accepté).
M. Breden, J.-P. Lessard et M. Vanicat. (2013), Global bifurcation diagram of steady states of systems of PDEs via rigorous numerics: a 3-component reaction-diffusion system, Acta Applicandae Mathematicae, 128(1), Springer, pp. 113-152, (Note: Accepté et publié en ligne).
Boffi, D. and Brezzi, F. and Fortin, M. (2013), Mixed and Hybrid Finite Element Methods and Applications, Springer Series in Computational Mathematics, 44, Springer Berlin Heidelberg.
I. Dione and J.M. Urquiza (2013), Finite element approximations of the Lamé system with penalized ideal contact boundary conditions, Applied Mathematics and Computation, 223, pp. 115 - 126.
David Landry (2013), Capturer la complexité de l’écoulement d’un système dynamique.
Kavazovic Z., Deteix J., Cloutier A., Fortin A., (2012), A numerical model for coupled heat and mass transfer involved during the MDF mat hot pressing process. Part I: Coupled heat and mass transport model, Wood and Fiber Science, 44(2), pp. 1--21.
R. Bois, M. Fortin et A. Fortin. (2012), A fully optimal anisotropic mesh adaptation method based on a hierarchical error estimator, Computer Methods in Applied Mechanics and Engineering, 209-212, pp. 12--27.
C. Barbuta, P. Blanchet, A. Cloutier, J. Deteix, A. Fortin (2012), Stress distribution in engineering wood flooring with OSB substrate, Journal of Wood Science, 58(4), Springer Japan, pp. 327--335.
G. Kiss and J.-P. Lessard (2012), Computational fixed point theory for differential delay equations with multiple time lags, Journal of Differential Equations, 252(4), pp. 3093–3115.
Fortin M., Fortin A., Chamberland É., Pouliot, B. (2012), On a new edge-based gradient recovery technique, Int. J. Num. Meth. Eng., 93(1), pp. 52--65.
J. Deteix, G. Djoumna, P. Blanchet, A. Fortin, A. Cloutier (2012), Minimizing flooring strip weight: a shape optimization approach, BioResources, 7(2), pp. 1931--1947, (Note: Accepté).
Kavazovic Z., Deteix J., Cloutier A., Fortin A., (2012), A numerical model for coupled heat and mass transfer involved during the MDF mat hot pressing process. Part II: Coupled mechanical, heat and mass transfer models, Wood and Fiber Science, 44(3), pp. 1--20.
Bois R., Fortin M., Fortin A., Couët A. (2012), Hierarchical elements for high order optimal anisotropic mesh adaptation, European Journal of Computational Mechanics/Revue Européenne de Mécanique Numérique, 21(1-2), pp. 72--91.
Wane, B., Urquiza, J., Fortin A., Pelletier D. (2012), Hierarchical elements for solving turbulent flow problems on anisotropic meshes, European Journal of Computational Mechanics/Revue Européenne de Mécanique Numérique, 21(1-2), pp. 22--39.
Belhamadia Y., Kane A. S. et Fortin A. (2012), An enhanced mathematical model for phase change problems with natural convection, Int. J. of Numerical Analysis & Modeling, 3(2), pp. 192--206.
A. Baggag (2012), A Preconditioned Scheme for Nonsymmetric Saddle-Point Problems, High-performance scientific computing: Algorithms and Applications, Berry, M.W.; Gallivan, K.A.; Gallopoulos, E.; Grama, A.; Philippe, B.; Saad, Y.; Saied, F., Eds., pp. 219-250.
A. El maliki, M. Fortin, J. Deteix et A. Fortin (2012), Preconditioned iteration for saddle-point systems with bound constraints arising in contact problems, Computer Methods in Applied Mechanics and Engineering, 254, pp. 114 - 125.
Fortin A., Urquiza, J. Bois R. (2012), A mesh adaptation method for 1D-boundary layer problems, Int. J. of Numerical analysis & modeling, Series B, 3(4), pp. 408--428.
Andréanne Rhéaume (2012), Modélisation des ondes électriques du cœur à l'aide du modèle Fitzhugh-Nagano.
Jean-Philippe Gagné-Guay (2012), Adaptations de maillages pour l’équation de diffusion-convection.
André Fortin et André Garon (2011), Les éléments finis: de la théorie à la pratique, (Note: Publié en ligne).
Kane, A.S., Bourgault, Y., Iolov, A., Owens, R.G.,Fortin, A. (2011), Computation of blood flows accounting for red-blood cell aggregation/fragmentation, Seventh International Symposium on Turbulence and Shear Flow Phenomena, Ottawa, Canada, (Note: July).
Iolov, A., Bourgault, Y., Fortin, A., Kane, A., Owens, R. (2011), A finite element method for a microstructure-based model of blood, International Journal for Numerical Methods in Biomedical Engineering, 27(9), John Wiley & Sons, Ltd., pp. 1321--1349.
El maliki, A., Guénette, R., Fortin, M, (2011), An efficient hierarchical preconditioner for quadratic discretizations of finite element problems, Numerical Linear Algebra with applications, 18(5), pp. 789--803.
Nzokou F., Morse B. , Robert J.-L., Richard M., Tossou E. (2011), Numerical characteristics of a coupled river ice and hydrodynamic model, Canadian J. of Civil Engineering, (Note: Accepté).
Raymond, J., Therrien, R., Gosselin, L., Lefebvre, R. (2011), Numerical analysis of thermal response test using groundwater flow and h eat transport modeling, Renewable Energy, 36(1).
Raymond, J., Frenette, M., Léger, A., Magni, E., Therrien, R. (2011), Numerical Modeling of Thermally Enhanced Pipe Performances in Vertical Ground Heat Exchangers, ASHSRAE Transactions.
Dano, M.-L., Jean-St-Laurent, M., Fecteau, A. (2011), Snap-through of unsymmetric cross-ply laminates using distributed piezoelectric actuators, 26e ASC Technical conference, Montréal, Québec, (Note: 26-28 septembre).
Nzokou F., Morse B. , Robert J.-L., Richard M., Tossou E. (2011), Water wave transiants in an ice-covered channel, Canadian J. of Civil Engineering, (Note: Accepté).
Gakwaya, A., Saint-Marc, J.-C., Nandlall, D., Bouamoul, A., Dano, M.-L. (2011), Development and validation of a user's meso-scale based ballistic fabric model with application to the fan blade containment problem, 26e ASC Technical conference, Montréal, Québec, (Note: 26-28 septembre).
Gakwaya, A., Saint-Marc, J.-C., Nandlall, D., Bouamoul, A., Dano, M.-L. (2011), Application of a meso-scale based ballistic fabric model to the development of advanced lightweight engine fan blade-out containment structure, 26e ASC Technical conference, Montréal, Québec, (Note: 26-28 septembre).
J.B. van den Berg, J.-P. Lessard, J. Mireles James and K. Mischaikow (2011), Rigorous numerics for symmetric connecting orbits: even homoclinics of the Gray-Scott equation, SIAM Journal on Mathematical Analysis, 43(4), pp. 1557-1594.
M. Gameiro and J.-P. Lessard (2011), Existence of secondary bifurcations or isolas for PDEs, Nonlinear Analysis: Theory, Methods and Applications, 74(12), pp. 4131-4137.
M. Gameiro and J.-P. Lessard (2011), Rigorous computation of smooth branches of equilibria for the three-dimensional Cahn-Hilliard equation, Numerische Mathematik, 117(4), pp. 753-778.
Alexandre Couët (2011), Méthode SUPG pour l’équation de diffusion-convection.
Chamberland, É., Fortin, A., Tardieu, N. (2010), Solutions analytiques de problèmes de contact en grandes déformations, Mécanique & Industries.
El maliki, A., Guénette, R. (2010), An efficient preconditioning technique for saddle point systems arising from linearized Navier-Stokes equations, International Journal for Numerical Methods in Fluids, 63(12), pp. 1394–1420,.
Manouzi, H. (2010), FEM approximation of the Stochastic Stokes problem involving multiplicative white noise, CMMSE, pp. 605-608.
Belhamadia, Y., Fortin, A., Bourgault, Y. (2010), Efficient Simulation of Scroll Wave Turbulence in a Three-Dimensional Reaction-Diffusion System, Proceedings of the 10th International Conference on Computational and Mathematical Methods in Science and Engineerng, CMMSE 2010 Almeria, Espagne, (Note: 27-30 juin).
Bois, R., Fortin, M., Fortin, A. (2010), Maillages optimaux anisotropes, Comptes rendus de la conférence CRM-GIREF, Québec, pp. 15-20, (Note: Mai).
Wane, B., Bois, R., Urquiza, J., Fortin, A. (2010), Anisotropic mesh adaptation for a logarithmic formulation of the $k-\epsilon$ turbulence model, Comptes rendus de la conférence CRM-GIREF, Québec, pp. 174-178, (Note: Mai).
Chamberland, É., Fortin, A. (2010), Défis de l'adaptation de maillages pour le contact en grandes déformations, Comptes rendus de la conférence CRM-GIREF, Québec, pp. 34-42, (Note: Mai).
Robert Guénette (2010), Discrétisation d’une formulation mixte du problème du Laplacien de Hodge à l’aide des formes différentielles, Comptes-rendus de la conférence CRM_GIREF, Québec, Canada, pp. 108-111.
El maliki, A., Fortin, M., Tardieu, N., Fortin, A. (2010), Iterative solvers for 3D linear and nonlinear elasticity problems: displacement and mixed formulations, Int. J. Num. Meth. Eng., 83(13), pp. 1780-1802.
Fortin, A., Kane, A., Guénette, R., (2010), Numerical simulation of the deformation of drops under simple shear flow, J. Polymer Eng., 30(8), pp. 495-521.
Kavazovic, Z., Deteix, J., Cloutier, A., Fortin, A. (2010), Sensitivity study of a numerical model of heat and mass transfer involved during the MDF hot pressing process, Wood and Fiber Science, 42(2), pp. 130-149.
Chamberland, É., Fortin, A., Fortin, M. (2010), A performance study of finite element discretizations using manufactured solutions for hyperelastic materials in large deformations, Computers and Structures, 88, pp. 664-673.
Fortin, M., Fortin, A., Benmoussa, K., Tibirna, C. (2010), A reformulation of the Lesaint-Raviart discontinuous Galerkin method for advection equations, Comm. Appl. Num. Meth., 26(10), pp. 1343-1350.
Burns, E. R., Bentley, L. R., Therrien, R., Deutsch, C. V. (2010), Upscaling Facies Models to Preserve Connectivity of Designated Facies, Hydrogeology Journal, 18(6), pp. 1357-1373.
Brunner, P., Simmons, C. T., Cook, P. G., Therrien, R. (2010), Modeling Surface Water Groundwater Interaction using MODFLOW: Some important considerations, Ground Water, 48(2), pp. 174-180.
Cloutier, V., Lefebvre, R., Savard, M. M., Therrien, R. (2010), Desalination of a sedimentary rock aquifer system invaded by Pleistocene Champlain Sea water and processes controlling groundwater geochemistry, Envir. Earth Sciences, 59(5), pp. 977-994.
Raymond J., Robert, G., Therrien, R., Gosselin, L. (2010), A Novel Thermal Response Test Using Heating Cables, World Geothermal Congress 2010, Bali, Indonesia, (Note: 25-29 avril).
Grandmont, J. F., Cloutier, A., Gendron, G., Desjardins, R. (2010), Wood I-joist model sensitivity to oriented strandboard web mechanical properties, Wood Fiber Sci., 42(3), pp. 352-361.
Barbuta, C., Cloutier, A., Blanchet, P., Yadama, V., Lowell, E. C. (2010), OSB as substrate for engineered wood flooring, Eur. J. Wood Prod., pp. 7 p..
Barbuta, C., Blanchet, P., Cloutier, A., Yadama, V., Lowell, E.C. (2010), Tailor made OSB for special application, Eur. J. Wood Prod., pp. 9 p..
M. Gameiro and J.-P. Lessard (2010), Analytic estimates and rigorous continuation for equilibria of higher-dimensional PDEs, Journal of Differential Equations, 249(9), pp. 2237-2268.
J.B. van den Berg, J.-P. Lessard and K. Mischaikow (2010), Global smooth solution curves using rigorous branch following, Mathematics of Computation, 79(271), pp. 1565-1584.
J.-P. Lessard (2010), Recent advances about the uniqueness of the slowly oscillating periodic solutions of Wright’s equation, Journal of Differential Equations, 248(5), pp. 992-1016.
Kevin Falk (2010), Parallélisation d'un algorithme de comptage de voisins dans un maillage et scripts d'analyse de performance.
Chamberland, É., Fortin, A., Tardieu, N. (2009), Solutions analytiques de problèmes de contact en grandes déformations, Neuvième colloque national en calcul des structures, 2, Giens, France, pp. 671-676.
Fortin, M., Robitaille, C., Fortin, A.,, Rezgui, A. (2009), Frictional contact in solid mechanics, ICIAM 07, 6th international conference on industrial and applied mechanics, Jeltsch and Wanner, editors,, Zurich, Switzerland, pp. 131-154.
Tardieu, N., Tremblay, P. (2009), Un solveur multigrille hybride algébrique-géométrique, Neuvième colloque national en calcul des structures, 2, Giens, France (Hermès), pp. 411-416.
Bois, R., Fortin, M., Fortin, A. (2009), A new mesh adaptation method based on a Hermite reinterpolation of the FEM solution, Proc. of 11th ISGG Numerical Grid Conference, Montréal, pp. SVIII.2, (Note: May).
Illinca, F., Hétu, J.F. (2009), A finite element immersed boundary method for fluid flow around rigid object, Int. J. Num. Meth. Fluids, In press.
Belhamadia, Y., Bourgault, Y., Fortin, A. (2009), Mathematical simulation of the electric activity of the heart, Comptes-rendus de la 32e conférence canadienne de génie biomédical CCGB32, Calgary.
Belhamadia, Y. Fortin, A., Bourgault, Y. (2009), Towards accurate numerical method for monodomain models usign a realistic heart geometry, Mathematical Biosciences, 220(2), pp. 89-101.
Kane, A.S., Guénette, R., Fortin, A. (2009), A comparison of four implementations of the log-conformation formulation for viscoelastic fluid flows, Journal of Non-Newtonian Fluid Mechanics, 164(1-3), pp. 45-50.
Ben Amor, A., Cloutier, A., Beauregard, R. (2009), Determination of physical and mechanical properties of finishing papers used for wood-based composite products, Wood Fiber Sci., 41(2), pp. 117-126.
Dano, M.-L., Bourque, J.-P. (2009), Deformation behaviour of paper and board subjected to moisture diffusion, International Journal of Solids and Structures, 46(6), pp. 1305-1316.
Binette, P., Dano, M.-L., Gendron, G. (2009), Active shape control of composite structures under thermal loading, Smart Materials and Structures, 18, Online, pp. 025007.
Milburn, G., Akhras, G., Potvin, M.-J., Montminy, S., Dano, M.-L., Baril, C. (2009), Influence of plyangle on the fabrication stresses of composite tubes used in space applications, 60th International Astronautical Congress, Daejeon, Korea, (Note: October 12-16).
Dano, M.-L., Maillette, F., (2009), Damage location and identification using full-field strain measurement, ASC 24th technical conference proceedings, University of Delaware, USA, (Note: September 15-17).
Dano, M.-L., Bourque, J.-P. (2009), Out-of-plane deformation behaviour of multi-layer paperboard subjected to transient moisture diffusion, 17th International Conference on Composite Materials, Edinburgh, U.K., (Note: August 27-31).
Vincent, P.B., Dumas, G., Houde, S. (2009), Detached Eddy Simulation of Swirling Flow in a Hydroturbine Draft Tube Using OPENFOAM, 4th OpenFOAM WorkShop, Montreal, (Note: June 1-4).
Olivier, M., Dumas, G. (2009), Non-Linear Aeroelasticity for Nano-Air-Vehicles Applications Using OpenFOAM, 4th OpenFOAM WorkShop, Montreal, (Note: June 1-4).
Olivier, M., Dumas, G., Morissette, J.-F. (2009), A Fluid-Structure Interaction Solver for Nano-Air-Vehicle Flapping Wings, 19th AIAA Comp., Fluid Dyn. Conf.., Paper AIAA-2009-3676, San Antonio, USA, (Note: June).
Métivier, V., Dumas, G., Poirel D. (2009), Aeroelastic Dynamics of a NACA 0012 Airfoil at Transitional Reynolds Numbers, 39th AIAA Fluid Dyn. Conf.., Paper AIAA-2009-4034, San Antonio, USA, (Note: June).
Métivier, V., Dumas, G., Poirel, D. (2009), Effects of Inertia and Boundary Layer Tripping on Aeroelastic, Self-Excited Pitch Oscillations of an Airfoil, 13th CASI Aerodynamics Symposium, Paper CASI 334, Ottawa.
Morisssette, J.-F., Dumas, G. (2009), A Meshless Approach for Fluid-Structure Interaction Analysis in Flapping-Wing Flyers, 17th Annual Conf., of the CFD Society of Canada, Paper CFDSC2009-5B3, Ottawa, (Note: May).
Olivier, M., Dumas, G. (2009), Non-linear Aeroelasticity Using an Implicit Partitioned Finite Volume Solver, 17th Annual Conf. of the CFD Society of Canada, Paper CFDSC2009-5B1, Ottawa, (Note: May).
Vincent, P. B., Dumas, G., Houde, S. (2009), Comparison of URANS and DES Predictions for Hydroturbine Draft Tube, 17th Annual conf. of the CFD Society of Canada, Paper CFDSC2009-1A3, Ottawa, (Note: May).
Payette, F.A., De Hénau, V., Dumas, G., Sabourin, M. (2009), Sensitivity of Draft Tube Flow Prediction to Boundary Conditions, PCH noticias & SHP News, 11(41), pp. 26-29.
Blessent, D., Therrien, R. (2009), Tetrahedral meshes to model discretely-fractured media: application to the Olkiluoto site (Finland), 62st Canadian Geotechnical Conference & 10th Joint CGS/IAH-CNC Groundwater Conference, Edmonton.
Manouzi, H., Seaid M. (2009), Solving Wick-Stochastic Water Waves using a Galerkin Finite Element Method, Mathematics and Computers in Simulation, 79, pp. 3523-3533.
Manouzi, H., (2009), An optimal control problem for the stochastic Stokes equations, Systems Theory: Modeling, Analysis and Control, pp. 343-350.
Manouzi, H. (2009), Stochastic PDE's driven by multiplicative white noises: a numerical analysis, MAMERN09, pp. 635-640.
Fortin, M., Robitaille, C., Fortin, A., Rezgui, A. (2009), Frictional Contact in Solid Mechanics, ICIAM 2007, Jeltsh et Wanner, European mathematical society, Zurich, Suisse, pp. 131-154.
Iolov, A., Bourgault, Y., Fortin, A., Kane, A., Owens R. (2009), Finite Element Methods for a Mesoscopic Constitutive Model of Blood, 1st International Conference on Mathematical and Computational Biomedical Engineering-CMBE2009, Swansea, UK, (Note: 29 juin - 1 juillet).
Goderniaux, P., Brouyère, S., Fowler, H.J., Blenkinsop, S., Therrien, R., Orban, P., Dassargues, A., (2009), Large scale surface-subsurface hydrological model to assess climate change impacts on grounwater reserves, Journal of Hydrology, 373(1-2), pp. 122-138.
Lemieux, J. M., Kirkwood, D., Therrien, R. (2009), Fracture network analysis of the St-Eustache Quarry, Can. Geotech. J., 46(7), pp. 828-841.
Blessent, D., Therrien, R., MacQuarrie, K. (2009), Coupling geological and numerical models to simulate groundwater flow and mass transport in fractured media, Computers & Geosciences, 35(9), pp. 1897-1906.
Graf, T., Therrien, R. (2009), Stable-unstable flow of geothermal fluids in fractured rock, Geofluids, 9(2), pp. 138-152.
Bernardez, L., Therrien, R., Lefebvre, R., Martel, R. (2009), Simulationg the injection of micellar solutions to recover diesel in a sand column, Journal of Contaminant Hydrology, 103(3-4), pp. 99-108.
Rosenbom A., Therrien, R., Refsgaard, J.C., Jensen, K.H., Ernstsena, V., Klinta K. E. S., (2009), Numerical Analysis of Water and Solute Transport in Variably-Saturated Fractured Clayey Till, Journal of Contaminant Hydrology, 104(1-4), pp. 137-152.
Calderhead, A., Martel, R., Rivera, A., Therrien, R., Garfias, J. (2009), Pumping-induced regional land subsidence: calibrating a flow and compaction model with remote sensors and field data, 62st Canadian Geotechnical Conference & 10th Joint CGS/IAH-CNC Groundwater Conference, Halifax.
Raymond, J., Therrien, R., Gosselin, L., Lefebvre, R. (2009), Thermal response test with variable heat injection rate, 62st Canadian Geotechnical Conference & 10th Joint CGS/IAH-CNC Groundwater Conference, Halifax.
Blessent, D., Therrien, R. (2009), Tetrahedral meshes to model discretely-fractured media: application to the Olkiluoto site (Finland), 62st Canadian Geotechnical Conference & 10th Joint CGS/IAH-CNC Groundwater Conference, Halifax.
Blanchet, P., Barbuta, C., Cloutier, A., Yadama, V., Lowell, E. (2009), OSB panel as substrate for engineered wood flooring, Second edition of the International Scientific Conference on Hardwood Processing, Paris, France, (Note: September 28-30).
Barbuta, C., Blanchet, P., Cloutier, A., Yadama, V., Lowell, E.C. (2009), Fabrication de lames de plancher d'ingénierie à base de panneaux de lamelles orientées (OSB), Journées scientifiques Aquitaine/Québec. Construire en bois pour habiter autrement, Université de Bordeaux, France, (Note: 30 juin, 1-2 juillet).
Barbuta, C., Blanchet, P., Cloutier, A., Yadama, V., Lowell, E. (2009), OSB as substrate for engineered wood flooring, ICWSE International Conference, Brasov, Romania, (Note: June 4-6).
Éloïse Boiteau (2009), Comparaison de méthodes de calcul (Jaumann).
Villemure, C., Gosselin, L., Gendron, G. (2008), Minimizing Hot Spot Temperature of Porous Stackings in Natural Convection (accepted for publication), International Journal of Heat and Mass Transfer, 51(15-16), Elsvier, pp. 4025-4037.
Boffi, D., Brezzi, F., Demkiwicz, L.F., Duran, R.G., Falk, R. S., Fortin, M. (2008), Mixed finite elements, compatibilty conditions, and applications, Lecture notes in mathematics, Springer, 1939, Springer, Berlin.
Tardieu, N., Youbissi, F., Chamberland, É. (2008), Un algorithme de gradient conjugué projeté préconditionné pour la résolution de problèmes unilatéraux, Comptes rendus Mécanique, 336(11-12), pp. 840-845.
Deteix, J., Blanchet, P., Fortin, A., Cloutier, A. (2008), Finite element modeling of laminate wood composites hygromechanical behavior considering diffusion effects in the adhesive layers, Wood ans Fiber Science, 40(1), pp. 132-143, (Note: January).
Guénette, R., Fortin, A., Kane, A., Hétu, J.F. (2008), An adaptive remeshing strategy for viscoelastic fluid flow simulations, Journal of Non-Newtonian Fluid Mechanics, 153(1), pp. 34-45.
Belleville, B., Blanchet, P., Cloutier, A., Deteix, J. (2008), Wood-adhesive interface characterization and modeling in engineered wood flooring, Wood and Fiber Sciences, 40(4), pp. 484-494.
Dano, M.-L., Gakwaya, M., Jullière, B. (2008), Compensation of thermally-induced distortion in composite structures using Macro Fiber Composites, Journal of Intelligent Material System and Structures, 19(2), pp. 225-233.
ben Abdelghani, F., Simon, R., Aubertin, M., Therrien, R., Molson, J. (2008), Modelling water flow and transport of contaminants from mine wastes stored in open pits within fractured rock, 61th Annual CGS Conference, Edmonton.
Raymond, J., Therrien, R., Hassani, F. (2008), Overview of geothermal energy resources in Canadian mining environnements, 10th Int. Mine Water Association Congress, Karlovy Vary, République Tchèque, (Note: Juin).
Blessent, D., Therrien, R. (2008), A new approach for hydrogeological modeling in discretely-fractured media: from 3D geological representation to numerical simulations, Computational Method in Water Resources XVII International Conference, San Francisco, (Note: July).
Blessent, D., Hashemi Beni, L., Therrien, R. (2008), 3D Modelling for hydrogeological simulations in fractured geological media, Paper, The 19th IASTED International Conference on Modelling and Simulation, Québec, (Note: Mai).
Hashemi Beni, L., Blessent, D., Mostafavi, M.A., Therrien, R. (2008), A 3D Free-Lagrangian method to simulate three-dimensional groundwater flow ans mass transport, Paper, The 19th IASTED International Conference on Modelling and Simulation(Mai), Québec.
Urquiza, J., N'Dri, D., Garon, A., Delfour, M.C. (2008), Coupling Stokes and Darcy equations, Appl. Numer. Math., 58(5), pp. 525-538.
Manouzi, H., Hou, Steven (2008), An optimal control problem for stochastic linear PDE's driven by a Gaussian white noise, ENUMATH-07, Springer, pp. 629-637.
Manouzi, H. (2008), A finite element approximation of linear stochastic PDE's equations driven by a multiplicative white noise, International Journal of Computer Mathematics, 85(3-4), pp. 527-546.
Manouzi, H. (2008), Numerical solutions of SPDEs involving white noise, International Journal of Tomography & Statistics, 10(F08), pp. 96-108.
Manouzi, H. (2008), Numerical lMethods for pricing options under memory, First Financial and Economic Engineering Symposium, Agadir, pp. 119-124.
Fortin, A. (2008), Analyse numérique pour ingénieurs, 3e édition, Presses Internationales Polytechnique, pp. 475 p..
Graf, T., Therrien, R. (2008), A test case for the simulation of three-dimensional variable-density flow and solute transport in discretely-fractured porous media, Advances in Water Resources, 31(10), pp. 1352-1363.
Cloutier, V., Lefebvre, R., Therrien, R., Savard M. M. (2008), Multivariate statistical analysis of geochemical data as indicative of the hydrogeochemical evolution of groundwater in a sedimentary rock aquifer system, Journal of Hydrology, 353(3-4), pp. 294-313.
Weatherill, D., Graf, T., Simmons, C. T., Cook, P. G., Therrien, R., Reynolds, D. (2008), Discretising the fracture-matrix interface to simulate solute transport, Ground Water, 46(4), pp. 606-615.
Raymond, J. Therrien, R. (2008), Low-temperature geothermal potential of the flooded Gaspé Mines, Geothermics, 37(2), pp. 189-210.
Graf, T., Therrien, R. (2008), A method to discretize non-planar fractures for 3D subsurface flow and transport simulations, Int. Journal for Num., Meth. in Fluids, 56(11), pp. 2069-2090.
Grandmont, J. F., Desjardins, R., Cloutier, A., Gendron, G. (2008), Measurement of OSB properties and their variability for modeling purposes, 10th World Conference on Timber Engineering, Miyazaki, Japan, (Note: June 2-5).
Kavazovic, Z., Cloutier, A., Fortin, A. (2008), Sensitivity Study of a Numerical Model of Heat and Mass Transfer Involved during the MDF Hot Pressing Process, Society of Wood Science and Technology 51st Annual Convention *(3e place de la Compétition d'affiches étudiantes), Universidad del Bio Bio, Conception, Chile, (Note: November 10-12).
Kavazovic, Z., Fortin, A., Cloutier, A. (2008), Numerical Modeling of the Heat and Mass Transfer Phenomena Involved in the MDF Hot Pressing Process, The 4th International Conference on Advanced Engineered Wood and Hybrid Composites, Bar Harbor, Maine, USA, (Note: July 6-10).
J.B. van den Berg and J.-P. Lessard (2008), Chaotic braided solutions via rigorous numerics: chaos in the Swift-Hohenberg equation, SIAM Journal on Applied Dynamical Systems, 7(3), pp. 988-1031.
M. Gameiro, J.-P. Lessard and K. Mischaikow (2008), Validated continuation over large parameter ranges for equilibria of PDEs, Mathematics and computers in simulation, 79(4), pp. 1368-1382.
Bourgault, Y., Coudiere, Y, Pierre, C. (2007), Existence and uniqueness of the solution for the bidomain model used in cardiac electrophysiology, Nonliear analysis: Real world applications, doi:10.1016/j.nonrwa.2007.10.007, pp. 25 pages, (Note: October).
Paradis, F., Gendron, G. (2007), Structural modeling and testing of a concrete canoe, Ocean Engineering, 34(1), pp. 206-217.
Dano, M.-L., Kamal, E., Gendron, G. (2007), Analysis of bolted joints in composite laminates: Strains and bearing stiffness predictions, Composite Structures, 79(4), pp. 562-570.
Paradis, D., Martel, R., Karanta, G., Lefebvre R., Michaud, Y, Therrien, R., Nastev, M. (2007), Comparative study of methods for wellhead protection area delineation, Ground Water, 45(2), pp. 158-167.
Djoumna, G., Le Roux, D.Y., Pierre, R. (2007), High order C1 finite-element interpolating schemes Part II: Nonlinear semi-Lagrangian shallow-water models, Int. J. Numer. Methods Fluids, doi: 10.1002/fld.1687, (Note: November 27).
Djoumna, G., Pierre, R., Le Roux, D.Y. (2007), High order C1 finite-element interpolating schemes Part I: Semi-Lagrangian linear advection, Int. J. Numer. Methods Fluids, doi: 10.1002/fld.1688, (Note: December 8).
Le Roux, D.Y., Robert, J.L., Gabbouhy, M. (2007), A non conforming finite-element method for solving non-hydrostatic free-surface flow problems, Int. J. Numer. Methods Fluids, doi: 10.1002/fld.1681, (Note: December 5).
Rostand, V., Le Roux, D.Y. (2007), Raviart-Thomas and Brezzi-Douglas-Marini finite element approximations of the shallow-water equations, Int. J. Numer. Methods Fluids, doi: 10.1002/fld.1668, (Note: December 17).
Mohammadian, A., Le Roux, D.Y., Tajrishi, M. (2007), A conservative extension of the method of characteristics for 1-D shallow flows, Applied Mathematical Modelling, 31, pp. 332-348.
Toumbou, B., Le Roux, D.,Y., Sene, A. (2007), An existence theorem for a 2-D coupled sedimentation shallow-water model, C.R. Acad. Sci. Paris, Serie I, 344, pp. 443-446.
Le Roux, D.Y., Rostand, V., Pouliot, B. (2007), Analysis of numerically-induced oscillations in 2D finite-element shallow-water models, Part I: Inertia-gravity waves, SIAM J. Sci. Comput., 29, pp. 331-360.
Dano, M.-L., Jullière, B. (2007), Active control of thermally-induced distortion in composite structures using Macro Fiber Composite actuators, Smart Materials and Structures, 16(6), pp. 2315-2329.
Dano, M.-L., Kamal, E., Gendron, G. (2007), Analysis of bolted joints in composite laminates: Strains and bearing stiffness predictions, Composite Structures, 79(4), pp. 562-570.
Binette, P., Dano, M.-L., Gendron, G. (2007), Active position control of composite structures subjected to a temperature gradient, 6th Canadian international composites conference, Winnipeg, (Note: August 15-17).
Binette, P., Dano, M.-L., Gendron, G. (2007), Active shape control of composite structures under thermal loading, 16th International Conference on Composite Materials, Kyoto, Japan, (Note: July 8-13).
Dano, M.-L., Jullière, B. (2007), Contrôle actif de la forme de structures soumises à un chargement thermique à l'aide de piézocomposites, 8e colloque national en Calcul des structures, Giens, France, (Note: Mai 21-25).
Boulmezaoud, T. Z, Urquiza, J. M. (2007), On the eigenvalues of the spectral second order differentiation operator and application to the boundary observability of the wave equation, Journal of Scientific Computing, 31(3), pp. 307-345.
Tardieu, N., Youbissi, F., Chamberland, É. (2007), Un algorithme de gradient conjugué projeté préconditionné pour le traitement du contact unilatéral, Huitième colloque national en calcul des structures, I, Giens, France (Hermès), pp. 369-374.
Raymond, J., Therrien, R., Gosselin, L. (2007), Geothermal Technology and Resources for Active Mines, CIM Conference and Exhibition, Montreal.
Bonton, A., Rouleau, A., Bouchard, C., Rodriguez, M., Therrien, R. (2007), Modelling nitrate transport for groundwater source protection in an agricultural area, XXXV Congress IAH, Lisbon.
ben Abdelghani, F., Simon, R., Aubertin, M., Therrien, R. (2007), Numerical analysis of water flow and contaminant transport through mining wastes disposed in fractured rock, 60th Annual CGS Conference.
Manouzi, H., Seaid, M., Zahri, M. (2007), Wick-Stochastic Finite Element Solution of Reaction-Diffusion Problems, J. Comput. Appl. Math., 203(2), pp. 516-532.
Manouzi, H., Theting, T. G. (2007), Numerical analysis of the stochastic Stokes equations of Wick type, Numerical Methods for Partial Differential Equations, 23(1), pp. 73-92.
Bruchon, J., Fortin, A., Bousmina, M., Benmoussa, K. (2007), Direct 2D simulation of small bubble clusters: from the expansion to the equilibrium state, Int. J. Num. Meth. Fluids, 54(1), pp. 73-101.
Fortin, M., Robitaille, C., Fortin, A., Rezgui, A. (2007), Frictional Contact in Solid Mechanics, Comptes rendus de ICIAM, Zurich, Suisse.
Savard, C., Beaudoin, G., Therrien, R. (2007), Numerical modeling of 3D fluid flow and oxygen isotope exchange in fractured media: spatial distribution of isotope patterns, Geofluids, 7(4), pp. 387-400.
Graf, T., Therrien, R. (2007), Coupled thermohaline groundwater flow and single-species reactive solute transport in fractured porous media, Advances in Water Resources, 30(4), pp. 742-771.
Graf, T., Therrien, R. (2007), Variable-density groundwater flow and solute transport in irregular 2D fracture networks, Advances in Water Resources, 30(3), pp. 455-468.
S. Day, J.-P. Lessard and K. Mischaikow (2007), Validated continuation for equilibria of PDEs, SIAM Journal on Numerical Analysis, 45(4), pp. 1398-1424.
Tibirna, C., Edouard, D., Fortin, A., Larachi, F. (2006), Trickle-bed flow dynamics subject to filtration conditions, Chemical Engineering and Processing, 45(7), pp. 523-624.
Fortin, A., Benmoussa, K. (2006), An adaptive remeshing strategy for free-surface fluid flow problems. Part I: the axisymmetric case, Journal of Polymer Engineering, 26(1), pp. 21-58.
Fortin, A., Benmoussa, K. (2006), An adaptive remeshing strategy for free-surface fluid flow problems. Part II: the three-dimensional case, Journal of Polymer Engineering, 26(1), pp. 59-86.
Dumas, G., Kinsey, T. (2006), Eulerian simulations of an oscillating airfoil in power extraction regime, Advances in Fluids Mechanics VI, Rahman & Brebbia eds., WIT Press, 2006, ISBN 1-84564-163-9.
Julien, S., Torriano, F., Dumas, G. (2006), Rotating turbulent duct flows - Part I: End-wall effects on two-dimentionality, Paper CFD-2006-1077, 14th Ann. Conf. of the CFD Society of Canada, Kingston, Ontario, (Note: July 16-18).
Kinsey, T., Dumas, G. (2006), Parametric study of an oscillating airfoil in power extraction regime, Paper AIAA-2006-2836, 24th AIAA Applied Aero. Conf., San Francisco, CA, (Note: June).
Torriano, F., Julien, S., Dumas, G. (2006), Rotating turbulent duct flows - Part II: Flow development, Paper AIAA-2006-1078, 14th Ann. Conf. of the CFD Society of Canada, Kingston, Ontario, (Note: July 16-18).
Villaumé, F., Kinsey, T., Dumas, G. (2006), Lagrangian and eulerian simulations of 2-D flows about moving bodies, Paper CFD-2006-1102, 14th Ann. conf. of the CFD Society of Canada, Kingston, Ontario, (Note: July 16-18).
Blanchet, P., Cloutier, A., Gendron, G., Beauregard, R. (2006), Engineered wood flooring design using the finite element method, Forest Products Journal, 56(5), pp. 59-65.
Dano, M.-L., Gendron, G., Maillette, F., Bissonnette, B. (2006), Experimental characterization of damage in random short glass fiber reinforced composites, Journal of Thermoplastic Composite Materials, 19(1), pp. 79-96.
Mohammadian, A., Le Roux, D. (2006), Simulation of shallow flows over variable topography using unstructured grids, International Journal for Numerical Methods in Fluids, 52, pp. 473-498.
White, L., Legat, V., Deleersnijder, É., Le Roux, D. (2006), One-dimensional benchmark for the propagation of Poincaré waves, Ocean Modelling, 15, pp. 101-123.
Mohammadian, A., Le Roux, D. (2006), Conservative semi-implicit semi-Lagrangian scheme for simulation of shallow flows, Computer physics communications, 174, pp. 99-108.
Psofogiannakis, G., Bourgault, Y., Conway, B., Ternan, M. (2006), Mathematical model for direct propane phosphoric acid fuel cell., Journal of Applied Electrochemistry, 36, pp. 115-130, (Note: January).
Bourgault, Y. (2006), Computing gas-particle flows in airways with an Eulerian model, European Conference on Computational Flouid Dynamics-ECCOMAS CFD 2006, Egmond ann Zee, The Netherlands, pp. 10 pages, (Note: September 5-8).
Bourgault, Y. (2006), Eulerian modelling of aerosols in airways, 14th Annual Conference of the CFD Society of Canada, Kingston, Ontario, pp. 7 pages, (Note: July 16-18).
Coros, C., Bourgault, Y. (2006), Numerical investigations of periodically forced internal flows, 14th Annual Conference of the CFD Society of Canada, Kingston, Ontario, pp. 8 pages, (Note: July 16-18).
Saleh, J., Bourgault, Y., Ternan, M. (2006), Bubble management at the interface of the anode channel and the anode backing layer in a direct methanol fuel cell, 16th International Symposium on New Materials for Electrochemical Systems, Montreal, (Note: July 9-12).
Duvigneau R, Pelletier, D. (2006), On accurate boundary conditions for a shape sensitivity equation methods, International Journal for Numerical Methods in Fluids, 50(2), pp. 147-164, (Note: January).
Duvigneau, R., Pelletier, D. (2006), A sensitivity equation method for fast evaluation of nearby flows and uncertainty analysis for shape parameters, International Journal of Computational Fluid Dynamics, 20(7), pp. 497-512, (Note: August).
Duvigneau, R., Pelletier, D. (2006), An improved continuous sensitivity equation method for optimal shape design in mixed convection, Numerical Heat Transfer, Part B: Fundamentals, 50(1), pp. 1-24, (Note: July).
Painchaud-Ouellet, S., Tribes, C., Trépanier, J.-Y., Pelletier, D. (2006), Airfoil shape optimizaiton usign a NURBS parameterization under thickness constraint, AIAA Journal, 44(10), pp. 2170-2178, (Note: October).
Vétel, J., Farinas, M.-I., Garon, A., Pelletier, D. (2006), Characterization of a diffuser flow by time-resolved PIV, Journal of Visualization, 9(2), (Note: February).
Colin, E., Etienne, S., Pelletier, D., Borggaard, J. (2006), A general sensitivity equation formulation for turbulent heat transfer, Numerical Heat Transfert, Part B: Fundamentals, 49(2), pp. 125-153, (Note: August).
Duvigneau, R., Pelletier, D. (2006), On accurate boundary conditions for a shape sensitivity equation method, International Journal for Numerical Methods in Fluids, 50(2), pp. 147-164, (Note: January).
Hristova, H., Etienne, S., Pelletier, D., Borggaard, J. (2006), A continuous of a sensitivity equation method for time-dependent incompressible laminar flows, International Journal for Numerical Methods in Flouids, 50(7), pp. 817-844, (Note: March).
Eça, L., Hoekstra, M., Hay, A., Pelletier, D. (2006), A manufactured solution for verification of turbulent flow solvers using Eddy-viscosity models, 7th World Congress on Computational Mechanics, Los Angeles, California, pp. 16-22, (Note: July).
Eça, L,, Hoekstra, M., Hay, A., Pelletier, D. (2006), Accomplishments and challenges in verification and validation: On the construction of manufactured solutions for one and two-equation Eddy-viscosity models, 7th World Congress on Computational Mechanics, Los Angeles, California, (Note: July 16-22).
Ilinca, F., Pelletier, D. (2006), A continuous shape sensitivity equation method for unsteady laminar flows, European conference on Computational Fluid Dynamics, ECCOMAS CFD 2006, The Netherlands.
Eça, L., Hoekstra, M., Hay, A., Pelletier, D., Roache, P.-J. (2006), A manufactured solution for two-dimensional steady wall-bounded incompressible turbulent flow, IST Report D72-34, 2nd Workshop on CFD Uncertainty Analysis, Lisbon, Portugal, pp. 19-20, (Note: October).
Eça, L,, Hoekstra, M., Hay, A., Pelletier, D. (2006), On the construction of manufactured solutions for one and two-equation Eddy-viscosity models, 7th World Congress on Computational Mechanics, Los Angeles, California, (Note: July 16-22).
Eça, L,, Hoekstra, M., Hay, A., Pelletier, D.¸ (2006), A manufactured solution for verification of turbulent flow solvers using Eddy-viscosity models, 7th World Congress on Computational Mechanics, Los Angeles, California, (Note: July 16-22).
Pelletier, D. (2006), Manufactured solutions and verification of adaptive codes and simulations, Minisymposium of verification & validation, 7th World Congress on Computational Mechanics, Los Angeles, California, (Note: July 16-22).
Tremblay, D., Etienne, S., Pelletier, D. (2006), Manufactured solution for FSI code verification, 36th AIAA Fluids Dynamics Conference and Exhibit, San Francisco, CA, (Note: June 5-8).
Etienne, S., Hay, A., Garon, A., Pelletier, D. (2006), Shape sensitivity analysis of fluid-structure interaction problems, 36th AIAA Fluids Dynamics Conference and Exhibit, San Francisco, CA, (Note: June 5-8).
Ilinca, F., Hay, A., Pelletier, D. (2006), Shape sensitivity analysis of unsteady laminar flow past a cylinder in ground proximity, 3rd AIAA Flow Control Conference, San Francisco, CA, (Note: June 5-8).
Edmond, P., Pelletier, D., Etienne, S., Borggaard, J. (2006), Application of a sensitivity equation method to compressible subsonic impinging jets, Paper AIAA-2006-0909, 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (Note: January 9-12).
Hay, A., Etienne, S., Duvigneau, R., Pelletier, D. (2006), Evaluation of flows on nearby geometries by a shape sensitivity equation method, AIAA Paper 2006-12l96, 44 th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (Note: January 9-12).
Farhloul, M., Nicaise, S., Paquet, L. (2006), A posteriori error estimation for the dual mixed finite element method of the Stokes problem, Numerical functional analysis and optimization, 27, pp. 831-846.
Cloutier, A., Ananias, R., Ballerini, A., Pecho, R. (2006), Effect of radiata pine juvenile wood on the physical and mechanical properties of oriented strandboard, Published on-line in Holz Roh Werkst. DOI 10.1007/S00107-006-0148-2..
Xing, C., Deng, J., Zhang, S.Y., Riedl, B., Cloutier, A. (2006), Properties of MDF from black spruce tops as affected by thermomechanical refining conditions, Holz Roh Werkst, 64(6), pp. 507-512.
Alteyrac, J., Cloutier, A., Zhang, S.Y. (2006), Characterization of juvenile wood to mature wood transition age in black spruce (Picea mariana (Mill.) B.S.P.) at different stand densities and sampling heights, Wood Sci. Technol., 40(2), pp. 124-138.
Garcia, R. A., Cloutier, A., Riedl, B. (2006), Dimensional stability of MDF panels produced from heat-treated fibres, Holzforschung, 60(3), pp. 278-284.
Xing, C., Riedl, B., Cloutier, A., Deng, J., Zhang, S.Y. (2006), UF resin efficiency of MDF as affected by resin content loss, coverage level and pre-cure, Holz als Roh und Werkstoff, 64(3), pp. 221-226.
Xing, Zhang, S.Y., Deng, J., Riedl, B., Cloutier, A. (2006), MDF performance as affected by wood fiber acidity, bulk density, and size distribution, Wood Sci. Technol., 40(8), pp. 637-646.
Xing, C., Deng, J., Zhang, S.Y., Riedl, B., Cloutier, A. (2006), Impact of bark content on the properties of medium density fiberboard (MDF) in four species grown in Eastern Canada, Forest Prod. J., 56(3), pp. 64-69.
Alteyrac, J., Cloutier, A.,, Ung, C-H, Zhang, S.Y. (2006), Mechanical properties in relation to selected wood characteristics of black spruce, Wood Fiber Sci., 38(2), pp. 229-237.
Cloutier, V., Lefebvre, R., Savard, M.M., Bourque, E., Therrien, R. (2006), Hydrogeochemistry and groundwater origin of the Basses-Laurentides sedmentary rock aquifers, St-Lawrence Lowlands, Québec, Hydrogeology Journal doi: 10.1007/s10040-005-0002-3(14), pp. 573-590.
Lemieux, J.-M., Therrien, R., Kirkwood, D. (2006), Small-scale structural, geophysical and hydraulic characterization of fractured dolostone, Hydrogeology Journal doi: 10.1007/s10040-005-0457-2, 14, pp. 603-612.
Descamps, G., Therrien, P., Therrien, R. (2006), A novel approach for web-based diffusion and analysis of spatial data, Computer & Geoscience doi: 10.1016/j.cageo.2005.09.08, 32, pp. 643-655.
Raymond, J., Therrien, R. (2006), Investigating the low-temperature geothermal eneergy potential of the Gaspé Mines, Murdochville, Canada, Geothermal Resources Council, 2006 Annual Meeting, San Diego.
Blais, V., Lefebvre, R., Ouellon, T., Parent, M., Therrien, R., Michaud, B. (2006), Groundwater flow and TCE transport in relationship with the Jacques-Cartier River in Shannon, Québec, Canada, 7th Joint CGS/IAH Groundwater Specialty Conference, Vancouver.
Matanga, G., Gessford, L., Nelson, K., Demarco, D., Sudicky, E.A., Therrien, R., Panday, S., McLaren, R. (2006), Fully-integrated surface and subsurface model for conjunctive analysis of water supply reliability, water quality and ecosystem health, Joint 8ty Federal Interagency Sedimentation and 3rd Hydrologic Modeling Conferences, Reno Nevada, (Note: April 2-6).
Sudicky, E.A., Di Iorio, Jones, J.P., Lemieux, J.M., Park, Y.J. McLaren, R.G., Therrien, R., Diouf, C.W., Panday, S. (2006), Flow and contaminant transport in integrated surface-subsurface flow systems: Model application at various catchment scales, Joint 8th Federal Interagency Seimentation and 3rd Hydrologic Modeling Conferences, Reno Nevada, (Note: April 2-6).
Diouf, C.W., Therrien, R., Lefebvre, R. (2006), Simulation numérique de l écoulement de surface et souterrain du transport de soluté dans Portneuf, Congrès conjoint AGC-AMC, Montréal.
Beaudoin, G., Therrien, R., Savard, C. (2006), 3D numerical modelling of fluid flow in the Val-d'Or orogenic gold district: major crustal shear zones drain fluids from overpressured vein fields DOI 10.1007/s00126-005-0043-5, Mineralium Deposita, 41, pp. 82-98.
Garcia, R., Cloutier, A., Riedl, B. (2006), Chemical modification and wetting of MDF panels produced from fibers treated with maleated polypropylene wax, Wood Sci. Technol., 40, pp. 402-416.
Xing, C., Zhang, S.y., Deng, J., Riedl, B., Cloutier, A. (2006), Medium-density fiberboard performance as affected by wood fiber acidity, bulk density, and size distribution, Wood Sci. Technol., 40, pp. 637-646.
Graf, T., Therrien, R. (2006), Coupled thermohaline groundwater flow and single-species reactive solute transport in fractured porous media, Advances in Water Resources, 30 doi:10.1016/j.advwatres.2006.07.001, pp. 742-771.
Graf, T., Therrien, R., (2006), Variable-density groundwater flow and solute transport in irregular 2D fracture networks, Advances in Water Resources, doi:10.1016/j.advwatres.2006.05.003.
Cey, E.E., Rudolph, D.L., Therrien, R., (2006), Simulation of groundwater recharge dynamics in partially saturated fractured soils incorporating spatially variable fracture apertures, Water Resources Research, 42 doi:10.1029/2005WR004589(W09413).
Grandmont, J. F., Thivierge, C., Cloutier, A., Gendron, G. (2006), Determination of Engineering Properties and Modeling of Wood I-Joist, 9th World Conference on Timber Engineering, Portland, Oregon, USA, pp. 8 p..
Maggy Pouliot (2006), Séchage des panneaux d'armoire.
Fortin, A., Belhamadia, Y. (2005), Numerical Prediction of Freezing Fronts in Cryosurgery: Comparaison with Experimental Results, Computer Methods in Biomechanics & Biomedical Engineering, 8(43), pp. 241-249, (Note: August).
Alteyrac, J., Zhang, S.Y., Cloutier, A. (2005), Influence of stand density on ring width and wood density at different sampling heights in Black Spruce (Picea mariana), Wood Fiber Sci., 37(1), pp. 83-94.
Garcia, R., Cloutier, A., (2005), Characterization of heat and mass transfer in the mat during hot pressing of MDF panels, Wood Fiber Sci., 37(1), pp. 23-41.
Duvigneau, R., Pelletier, D., Borggaard, J. (2005), On the accuracy of shape parameter boudary conditions in the sensitivity equation method, Paper AIAA-2005-0127, 43rd AIAA Aerospace Sciences Meeting and Exhibit, (Note: January 10-14).
Etienne, S., Pelletier, D. (2005), An updated lagrangian monolithic formulation for steady-state fluid-structure interaction problems, Paper AIAA-2005-1086, AIAA-2005-0127, 43RD AIAA Aerospace Sciences Meeting and Exhibit, (Note: January 10-14).
Colin, F., Etienne, S., Pelletier, D. Borggaard, J. (2005), Application of a sensitivity equation method to turbulent conjugate heat transfer, Paper AIAA-2005-0186, 43rd AIAA Aerospace Sciences Meeting and Exhibit, (Note: Juanuary 10-14).
Xing, C., Deng, J., Zhang, S.Y., Riedl, B., Cloutier, A. (2005), Differential scanning calorimetry characterization of urea-formaldehyde resin curing behavior as affected by less desirable wood material and catalyst content, J. Appl. Polym. Sci., 98, pp. 2027-2032.
Garcia, R., Cloutier, A., Riedl, B. (2005), Dimensional stability of MDF panels produced from fibres treated with maleated polypropylene wax, Wood Sci. Technol. http://dx.doi.org/10.1007/s00226-005-0028-7, 39(8), pp. 630-650, (Note: November).
Blanchet, P., Gendron, G., Cloutier, A., Beauregard, R. (2005), Numerical prediction of engineered Wood flooring behavior, Wood Fiber Sci., 37(3), pp. 484-496.
Dano, M.-L., Gakwaya, A. (2005), Use of macro-fiber composites to control thermally-induced distortions in composite structures, Proceedings of the 5th Canadian International Composites Conference (CD), Vancouver.
Kinsey, T., Dumas, G. (2005), Aerodynamics of oscillating wings and performance as wind turbines, 23rd AIAA Applied Aerodynamics Conf., Paper AIAA-2005-5094, Toronto, Canada, pp. 6-9, (Note: June).
Julien, S., Dumas, G., Torriano, F., Maciel, Y. (2005), Investigation of the 3D inlet flow characteristics in a rotating channel set-up, 20th Canadian Congress of Applied Mechanics, CANCAM 2005-223, Symposium on Turbulence, Montreal, Canada, (Note: May 30 - June 2).
Maciel, Y., Yan, G., Dumas, G. (2005), Experiments on turbulent channel flow subject to system rotation, 20th Canadian Congress of Applied Mechanics, CANCAM 2005-222, Symposium on Turbulence, Montreal, Canada, (Note: May 30 - June 2).
Dumas, G., Kinsey, T. (2005), Unsteady forces on flapping airfoils, 11th Aerodynamics Symposium, Paper 257, Canadian Aeronautics and Space Institute (CASI), Toronto, Canada, (Note: April 26-27).
Fortin, M., Serghini Mounim, A. (2005), Mixed and hybrid finite element methods for convection-diffusion equations and their relationships with finite volume, Calcolo, 42(1), pp. 1-30.
Girard, B., Fortin, Y., Beaulieu, J. (2005), Conventional and high-temperature drying of plantation-grown white spruce for value-added products, Proceedings of the 9th International IUFRO Wood Drying Conference, Nanjing, China, pp. 363-368, (Note: 21-26 août).
Erchiqui, F., Bendada, A., Gakwaya, A., (2005), Analysis of long fibers direction of transversely isotropic hyperelastic material for thermoforming application, Journal of Reinforced Plastics and Composites, 24, pp. 961-975.
Dammak, F., Abid, S., Gakwaya, A., Dhatt, G. (2005), A formulation of the non linear discrete Kirchoff quadrilateral shell element with finite rotation and enhanced strains, Revue européenne des éléments finis, 14(1), pp. 7-31.
Erchiqui, F., Gakwaya, A., Rachik, M. (2005), Dynamic finite element analysis of non linear isotropic hyperelastic and viscoelastic materials for thermoforming applications, Polymer Engineering & Science, 45, pp. 125-134, (Note: 1).
Sharifi, H., Gakwaya, A. (2005), Object oriented modeling of field boundary element method in non linear solid mechanics with applications, Advances in boundary element techniques VI.A.P.S. Selvadurai et al (eds) EC ltd, London, pp. 317-326.
Le Roux, D., Sène, A., Rostand, V., Hanert, E. (2005), On some spurious mode issues in shallow-water models using a linear algebra approach, Ocean Modelling(10), pp. 83-94.
Le Roux, D., F. Carey, G. (2005), Stability/Dispersion analysis of the discontinuous GalerKin linearized shallow-water system, Int. J. Numer. Methods Fluids, 48, pp. 325-347.
Hanert, E., Le Roux, D., Legat, V., Deleersnijder, É. (2005), An efficient Eulerian finite-element method for the shallow-water equations, Ocean Modelling(10), pp. 115-136.
Mohammadian, A., Le Roux, D., Tajrishi, M., Mazaheri, K. (2005), A mass conservative scheme for simulating shallow flows over variable topography using unstructured grids, Advances in water resources, 28, pp. 523-539.
Tossou, E.E., Robert, J.-L., Gagnon, A. (2005), Experimental and numerical study of stormwater inlets, Canadian Society for Civil Engineering 17th Canadian Hydrotechnical Conference, Edmonton, Alberta, pp. Ref: A059, (Note: August).
Ganev, S., Gendron, G., Cloutier, A, Beauregard, R.. (2005), Mechanical Properties of MDF as a Function of Density and Moisture Content, Wood Fiber Sci., 37(2), pp. 314-326.
Ganev, S., Cloutier, A., Gendron, G., Beauregard, R., (2005), Linear Expansion and Thickness Swell of MDF as a Function of Panel Density and Sorption State, Wood Fiber Sci., 37(2), pp. 327-336.
Ganev, S., Cloutier, A., Gendron, G., Beauregard, R. (2005), Finite Element Modeling of the Hygroscopic Warping of Medium Density Fiberboard, Wood Fiber Sci., 37(2), pp. 337-354.
Reyna, A., Bousmina, M., Kaliaguine, S. (2005), The effect of sulfonation on mechanical properties of PEEK for fuel cell membranes, J. Appl. Polym. Sci., 6, pp. 2389-2393.
Sinha Ray, S., Bousmina, M. (2005), Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world, Progress in Materials Science, 50, pp. 962-1079.
Levesque, R., Vaudreuil, S., Mighri, F., Bousmina, M. (2005), Thermally activated non-reversible response of PS/PVME, J. Polymer. Eng., 25(6), pp. 487-499.
Levesque, R., Kaliaguine, S., Bousmina, M. (2005), Effect of molecular weight on the mutual diffusion process in PS/PVME blend, J. Polymer Eng., 25(6), pp. 501-526.
Sinha Ray, S., Bousmina, M., Okamoto, K. (2005), Structure-property relationship in nanocomposites of PBSA and Silicate, Macromol. Mat. Eng., 290, pp. 759-768.
Grmela, M., Lebond, G., Dauby, P.C., Bousmina, M. (2005), Ballistic-diffusive heat conduction at nanoscale: GENERIC approach, Physics Letters A, 339, pp. 237-245.
Zmievski, V., Grmela, M., Bousmina, M., Dagreou, S. (2005), Rheology of Suspensions of Rigid Spheres: Position and Velocity Correlations, Physics Review E, 71, 051503.
Sinha Ray, S., Bousmina, M. (2005), Compatibilization efficiency of the organically modified clay in immiscible PC/PMMA blend, Macromol. Rapid Comm., 26, pp. 45-455.
Iza, M., Bousmina, M. (2005), Damping function for narrow and large Mw polymers: Comparison with the Force-Balanced Network model, Rheol. Acta, 4, pp. 377-386.
Yu, W., Zhou, Ch., Bousmina, M. (2005), Theory of viscoelastic blends, J. Rheol., 49, pp. 215-236.
Sinha-Ray, S., Bousmina, M. (2005), Nano reinforcements of Renewable Plastics, Handbook of Biodegradable Polymeric Materials edited by S. Mallapragada and B. Narasimhan, 1(Chap. 9), pp. 1-53.
Bousmina, M. (2005), The truth about PNCs, Intern. Polym. Mat., Eng., Conf., Shanghai, China, pp. 18-21, (Note: September).
Bousmina, M. (2005), Fund. of PNCs Intern., Workshop on PNCs, Melbourne, pp. 23-25, (Note: May).
Bousmina, M. (2005), Mech. of complex systems, 5th Intern. Cong. on Mech., Casablanca, Maroc, pp. 19-22, (Note: April).
Bousmina, M. (2005), Rheo. of Polym. Blends, Gordon conference, Ventura, USA, pp. 6-11, (Note: March).
Bousmina, M., (2005), fundam. insight into PNCs, PPS meeting, Leiptizig, Germany, (Note: June).
Farhloul, M., Serghini Mounim, A. (2005), A mixed-hybrid finite element method for convection-diffusion problems., Applied Mathematics and Computation, On line at www.sciencedirect.com.
Boulaajine, L., Farhloul, M, Paquet, L. (2005), A posteriori error estimation for the dual mixed finite element method of the elasticity problem in a polygonal domain, Numer. Methods Partial Differential Eq., 21, pp. 938-960.
Fortin, A., Belhamadia, Y. (2005), Numerical modelling of phase change problems, Lecture Notes in Pure and Apllied Mathematics, 240, pp. 63-71.
Graf, T., Therrien, R. (2005), Variable-density groundwater flow and solute transport in porous media containing nonuniform discrete fractures, Advances in Water Resources doi:10.1016/j.advwatres.2005.04.011, 28, pp. 1351-1376.
Beaudoin, G., Therrien, R. (2005), Formation of orogenic gold deposits by short-lived pulses of metamorphic fluids drained by major crustal shear zones, GSA Annual meeting 2005, Salt Lake City.
Sudicky, E.A., Therrien, R., Park, Y.J., McLaren, R.G., Jones, J.P., Lemieux, J.M., Brookfield, A.E., Colautti, D., Panday, S., Guvanesen, V. (2005), On the challenge of integrated surface-subsurface flow and transport modeling at multiple catchment scales, GSA Annual meeting 2005, Salt Lake City.
Graf, T., Therrien, R. (2005), Modelling coupled variable-density flow and reactive transport in discretely-fractured porous media, GSA Annual meeting 2005, Salt Lake City.
Édith Laliberté (2005), Modélisation de motifs par des équations de réaction-diffusion..
Turgeon, E., Pelletier, D., Borggaard, J. (2004), A General Continuous Sensitivity Equation Method for the k-e Model of Turbulence, Int. Journal CFD, 18(1), pp. 29-46, (Note: January).
Pelletier, D., Turgeon, E., Tremblay, D. (2004), Verification and Validation of Umpinging Round Jet Simulations usign an Adaptive FEM, Int. J. Numer. Meth. Fluids, 44, pp. 737-763.
Pelletier, D., Roache, P.J. (2004), Verification and Validation of Computational Heat Transfer Handbook of Numerical Heat Transfer - 2nd Edition, Eds: W.J. Minkowycz, E.M. Sparrow, J. Y. Murthy - John Wiley.
Etienne, S., Pelletier, D. (2004), Sensitivity Analysis of Fluid-Structure Interaction problems, 12th Annual conference of the CFD Society of Canada, Ottawa, (Note: May 9-11).
Hristova, H., Etienne, S., Pelletier, D., Borggaard, J. (2004), Sensitivity Analysis of Time-Dependant Laminar Flows, 12th Annual conference of the CFD Society of Canada, Ottawa, (Note: May 9-11).
Borggaard, J., Iliescu, T., Pelletier, D. (2004), Optimal Design Using LES Models, Optimization Days 2004, Montréal, (Note: May 10-12).
Etienne, S., Pelletier, D., Garon, A. (2004), A Monolithic Formulation for Steady-State Fluid-Structure Interaction Problems, 34th AIAA Fluid Dynamics Conference and Exhibit, Portland, Oregon, (Note: June 28-July 1).
Hristova, H., Etienne, S., Pelletier, D., Borggaard, J. (2004), A General Sensitivity Equation Formulation for Unsteady Laminar Flows, 34th AIAA Fluid Dynamics Conference and Exhibit, Portland, Oregon, (Note: June 28-July 1).
Etienne, S., Pelletier, D. (2004), Adaptive Solultion of some Steady-State Fluid-Structure Interaction Problems, 3rd International Conference on Computational Fluid Dynamics (ICCFD3), Toronto, (Note: July 12-14).
Etienne, S., Pelletier, D., Garon, A. (2004), Monolithic Sensitivity Analysis of Steady-State Fluid-Structure Interaction Problems, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York, (Note: August 30-Sept 1).
Mahieu, J.N., Pelletier, D., Trepanier, J.Y., Borggaard, J. (2004), Second Order Sensitivity and Uncertainty Analysis for Laminar Airfoil Flows, AIAA Paper 2004-0742, 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (Note: January 5-8).
Hristova, H., Tremblay, D., Etienne, S., Pelletier, D., Borggaard, J. (2004), Application of a Sensitivity Equation Method to Transient Non-Linear Heat Conduction, AIAA Paper 2004-0495 - 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (Note: January 5-8).
Vidal, M., Cloutier, A., Fortin, A. (2004), Modélisation par éléments finis du procédé de pressage des panneaux MDF, 72e Congrès de l'ACFAS - Colloque 208, Montréal, (Note: 10 au 14 mai).
Belhamadia, Y., Fortin, A., Chamberland, É. (2004), Three-dimensional anisotropic mesh adaptation for phase change problems, J. Comp. Physics, 201, pp. 753-770.
Fortin, A., Bertrand, F., Fortin, M., Chamberland, É., Boulanger-Nadeau, P.-E., El maliki, A., Najeh, N. (2004), Adaptive remeshing strategy for shear-thinning fluid flow simulations, Computers and Chemical Engineering, 28(11), pp. 2363-2375.
Guénette, R., Fortin, A., Marcotte, J.-P., Labbé, J. (2004), Iterative solvers for quadratic discretisations of the Stokes problem, Int. J. Num. Meth. Fluids, 44(6), pp. 695-720.
Belhamadia, Y., Fortin, A., Chamberland, É. (2004), Anisotropic mesh adaptation for the solution of the Stefan problem, J. Comp. Physics, 194(1), pp. 233-255.
Kenny, G., Therrien, R., Fortin, A., Tibirna, C. (2004), Large-scale mass transport modelling in discretely-fractured porous media, 5th Joint CGS/IAH Groundwater Specialty Conference, Québec, pp. 8 p., (Note: October 24-27).
Fortin, A., Belhamadia, Y. (2004), Numerical modelling of phase change problems, IFIP, pp. 63-71.
Hanert, E., D. Le Roux, Legat, V. , Deleersnijder, E. (2004), Advection schemes for unstructured grid ocean modelling, Ocean Modelling, 7, pp. 39-58.
Le Roux, D. (2004), Shallow-water models: Stationnary modes, the P1 NC - P1 pair, Conférence Internationale sur les Mathématiques et Applications aux Problèmes de Développement au Sahel, Saint-Louis, Sénégal, pp. 7 pages, (Note: 15-19 décembre).
Hanert, E., Le Roux, D., Legat, V., Deleersnijder, E. (2004), A comparison of 4 advection schemes for use in unstructured grid ocean modelling, The 6th National Congress on Theoretical and Applied Mechanics, NCTAM-2003-089, Ghent, Belgium, pp. 8 pages, (Note: May 26-27).
Salvo, L., Ananias, R.A., Cloutier, A. (2004), Influencia de la estructura anatomica en la permeabilidad especifica transversal al gas del pino radiata, Maderas: Ciencia y tecnologia, 6(1), pp. 33-44.
Pecho, R., Ananias, R.A., Ballerini, A., Cloutier, A. (2004), Influencia de la madera juvenil de pino radiata sobre las propiedades mecanicas de tableros OSB, Maderas: Ciencia y tecnologia, 6(1), pp. 45-59.
Xing, C., Riedl, B., Cloutier, A., He, G. (2004), The effect of resin pre-cure on the internal bond strength of medium density fiberboard, Holz als Roh- und Werkstoff, 62(6).
Xing, C., Riedl, B., Cloutier, A. (2004), Measurement of urea-formaldehyde resin distribution as a function of MDF fiber size by laser scanning microscopy, Wood Sci. Technol., 37, pp. 495-507.
Gendron, G., Dano., M.L., Cloutier, A. (2004), A numerical study of the hygro-mechanical deformation of two cardboard layups, Composite Sci. Technol., 64, pp. 619-627.
Defo, M., Cloutier, A., Riedl, B. (2004), Wood-cement compatibility of some Eastern Canadian woods by isothermal calorimetry, Forest Prod. J., 54(10), pp. 49-56.
Daeninck G., Dumas, G., Winckelmans, G. (2004), Vortex method for the DNS of flows about arbitrarily moving, multiple bodies, Bulletin of the American Physical Society Paper 10193, 57th Annual Meeting of the APS/DFD, Seatle, USA.
Dumas, G., Lemay, J. (2004), Splash and spray measurement and control: Recent Progress, The Aerodynamics of Heavy Vehicles, McCallen, Browand & Ross Eds., Lecture Notes in Applied and Computational Mechanics, Springer-Verlag (ISBN: 3-540-22088-7), 19, pp. 533-547.
Dumas, G. (2004), Modélisation de l'aérodynamique de systèmes d'ailes oscillantes: Application à l'extraction d'énergie, Conférence invitée, Unité TERM, Département de génie mécanique, Université catholique de Louvain, Louvain-La-Neuve, Belgique, (Note: juillet 2004).
Lacasse, D., Turgeon, É. Pelletier, D. (2004), On the judicious use of the k-epsilon model. Wall functions and adaptivity, International Journal for Thermal Sciences, 43, pp. 925-938, (Note: October).
Borggaard, J., Iliescu, T., Pelletier, D., Vugrin, K. (2004), Comparison of numerical noise in design objectives using LES and turbulence models, Paper AIAA-2004-4623 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York, (Note: August 30 - Sept. 1).
Etienne, S., Pelletier, D. (2004), Adaptive solution of some sensitivity fluid-structure interaction problems, 8th International Conference on Flow-Induced Vibrations (FIV 2004), Paris, (Note: July 6-9).
Hristova, H., Etienne, S., Pelletier, D., Borggaard, J. (2004), A general sensitivity equation formulation for unsteady laminar flows, 34th AIAA Fluid Dynamics Conference and Exhibit, Portland, Oregon, (Note: June 28 - July 1).
Etienne, S., Pelletier, D., Garon, A. (2004), A monolithic formulation for steady-state fluid-structure interaction problems, 34th AIAA Fluid Dynamics Conference and Exhibit, Portland, Oregon, (Note: June 28 - July 1).
Etienne, S., Pelletier, D. (2004), Sensitivity analysis of fluid-structure interaction problems, 12th Annual Conference of the CFD Society of Canada, Ottawa, (Note: May 9-11).
Hristova, H., Etienne, S., Pelletier, D., Borggaard, J. (2004), Sensitivity analysis of time-dependent laminar flows, 12th Annual Conference of the CFD Society of Canada, Ottawa, (Note: May 9-11).
Borggaard, J., Illiescu, T., Pelletier, D. (2004), Optimal design using LES models, Optimization Days 2004, Montréal, (Note: May 10-12).
Fortin, Y., Defo, M., Nabhani, M., Tremblay, C., Gendron, G. (2004), A simulation tool for the optimization of lumber drying schedules, Drying Technol., 22(5), pp. 963-984.
Defo, M., Fortin, Y. (2004), Modeling superheated steam vacuum drying of wood, Drying Technol., 22(10), pp. 2231-2253.
Erchiqui, F., Bendada, A., Gakwaya, A., Kandil, N. (2004), Dynamic finite element analysis of forming process in long fibre reinforced hyperelastic materials, Material processing and design: modeling, simulation and applications: NUMIFORM 2004, ED S. Ghosh et al, pp. 321-326.
Gakwaya, A., Toussaint, G., Gaudreault, P., William, K., Durocher, R.. (2004), On the design and evaluation of lightweight metal protection against blast loading using LS-DYNA, Int. Conf. on Computational and Experimental Engineering & Sciences, (Note: July 26-29).
Robert, J.-L. (2004), Grilles d'égout pluvial au banc d'essai, Revue Contact plus, Association des ingénieurs municipaux du Québec(51), pp. 20-23.
Chérif, R., Lagacé, Robert, J.-L. (2004), Optimisation des paramètres Green et Ampt pour un modèle conceptuel pluie-infiltration-ruissellement, Canadian Biosystems Engineering/Le génie des biosystèmes au Canada, 46, pp. 1.7-1.14.
Sudicky, E.A., Di Iorio, T.A., Jones, J.P., McLaren, R.G., Therrien, R. (2004), Holistic simulation of flow and contaminant transmport in integrated surface-subsurface flow systems at the catchment scale, 5yh Joint CGS/IAH Groundwater Specialty Conference, Québec, Canada, pp. 8 p., (Note: October 24-27).
Cloutier, V., Lefebvre, R., Savard, M.M., Therrien, R. (2004), Groundwater origin and geochemical processes in the Basses-Laurentides sedimentary rock aquifer system, St. Lawrence Lowlands, 5th Joint CGS/IAH Groundwater Specialty Conference, Québec, Canada, pp. 8 p., (Note: October 24-27).
Graf, T., Therrien, R. (2004), Modeling variable-density groundwater flow and soluste transport in complex fracture networks, 5th International Conference on Hydroinformatics, Québec, Canada, pp. 8 p., (Note: October 24-27).
Ledoux, C., Therrien, R., Novakowski, K., Kirkwood, D. (2004), Investigation of the impact of fracture interssection on solute transport in fractured carbonate, 5th Joint CGS/IAH Groundwater Specialty Conference, Québec, Canada, pp. 8 p., (Note: October 24-27).
Pontlevoy, O., Lefebvre, R., Therrien, R., Martel, R., Ouellet, M., Lamontagne, C. (2004), Numerical modeling of groundwater flow and mass transport in interconnected granular and rock aquifers at the Ville Mercier DNAPL-contaminated site, 5th Joint CGS/IAH Groundwater Specialty Conference, Québec, Canada, pp. 8 p., (Note: October 24-27).
Boutin, A., Lefebvre, R., Blais, V., Martel, R., Therrien, R., Parent, M. (2004), Modeling groundwater flow and TCE transport in the Valcartier area aquifer system, 5th Joint CGS/IAH Groundwater Specialty Conference, pp. 8 p., (Note: October 24-27).
Lefebvre, R., Boutin, A., Blais, V., Parent, M., Ouellon, T., Martel, R., Therrien, R. (2004), Hydrogeological context and dissolved TCE plume characterization in the Valcartier area, 5th Joint CGS/IAH Groundwater Specialty Conference, Québec, Canada, pp. 8 p., (Note: October 24-27).
Murat, V., Martel, R., Savard, M.M., Nastev, M., Paradis, D., Michaud, Y. Lefebvre, R., Therrien, R. (2004), Comparing vulnerability mapping methods in two Canadian hydrogeological setting, 5th Joint CGS/IAH Groundwater Specialty Conference, Québec, Canada, pp. 8 p., (Note: October 24-27).
Beaudoin, G., Therrien, R., (2004), Fluid flow in overpressured vein fields: what is the role of major crustal shear zones?, Society of Economic Geologists 2004 conference, Perth, Australia, (Note: Sept. 27 - Oct. 01).
Sudicky, E.A., Di Iorio, T.A., Jones, J.P., Lemieux, J.M., Park, Y.J., McLaren, R.G., Therrien, R., Panday, S. (2004), Flow and contaminant transport in integrated surface-subsurface flow systems at the catchment scale: Numerical solution strategy and application, finite-element models, MODFLOW and More 2004, Carlsbad, Czech Republic, (Note: Sept. 13-16).
Cyr, E., Rudolph, D., Therrien, R. (2004), Dynamics of groundwater recharge through structured soils and the influence on water quality, Groundwater Qualilty 2004, 4th International Conference, University of Waterloo, Ontario, Canada, (Note: July 19-22).
Thériault, V., Aubertin, M., Simon, R., Therrien, R., Molson, J. (2004), Modelling disposal of mining wastes in open pit with a pervious envelope, Groundwater Quality 2004, 4th International Conference, University of Waterloo, Ontario, Canada, (Note: July 19-22).
Boyaud, C., Therrien, R. (2004), Numerical modeling of mine water rebound in Saizerais, northeastern France, Computational Methods in Water Resources, 2004 International Conference, Chapel Hill, North Carolina, USA, (Note: June 13-17).
Ray, S., Pouliot, S., Bousmina, M., Utracki, L.A. (2004), Role of modified layered silicate as a compatibilizer for PS/PP blends, Polymer, 45, pp. 8403-8413.
Guo, S., Ait-Kadi, A., Bousmina, M. (2004), A model predictions and experimental results of weld-line strength in injection molded PS/PMMA blends, Polymer, 45, pp. 2911-2920.
Grmela, M., Jou, D., Casas-Vazquez, J., Bousmina, M., Lebond, G. (2004), Ensemble averaging in turbulence modeling, Physics Letters, 330, pp. 54-64.
Zkiek, A., Yu, W., Bousmina, M., Grmela, M (2004), Stress and interfacial area generated during breakup of a thread in a Newtonian medium, Rheol. Acta, 43, pp. 333-341.
Yu, W., Bousmina, M., Zhou, Ch. (2004), Determination of interfacial tension by the retraction method of highly deformed drop, Rheol. Acta, 43, pp. 342-349.
Yu, W., Bousmina, M., Tucker, C. (2004), Ellipsoidal model for viscoel. systems, J. Rheol., 48, pp. 417-438.
Mechbal, N., Bousmina, M. (2004), Uniaxial defor. and relaxation in blends, Rheol. Acta(43), pp. 119-126.
Farhloul, M., Nicaise, S., Paquet, L. (2004), A posteriori error estimation for the dual mixed finite element of the Stokes problem, C. R. Acad. Sci., Série I(339), pp. 513-518.
Farhloul, M., Zine, A.M. (2004), A mixed finite element method for a quasi-Newtonian fluid flow, Numer. Methods Partial Differential Eq., 20, pp. 803-819.
Roy, Sylvain (2004), Implantation d'un modèle de turbulence: le modèle de Spalart-Allmaras.
Maciel, Y., Picard, D., Yan, G. ,Gleyzes, C., Dumas, G. (2003), Fully developed turbulent channel flow subject to system rotation, 33rd AIAA Fluid Dyn. Conf., Florida, (Note: June).
Derome, D., Fortin, Y., Fazio, P. (2003), Modeling of moisture behavior of wood planks in nonvented flat roofs, Journal of Architectural Eng., 9(1), pp. 1-15.
Beaulieu, J., Girard, B., Fortin, Y. (2003), Study of geographical variation in kiln drying behavior of plantation-grown white spruce, Wood and Fiber Sci., 35(1), pp. 56-67.
Borggaard, J., Pelletier, D. (2003), Second order uncertainty analysis in phase change problems, AIAA-2003, 41th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (Note: January).
Pelletier, D. (2003), Uncertainty analysis by the sensitivity equation method, AIAA-2003, 41th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (Note: January).
Delfour, M.C., Zolesio, J.P. (2003), The new family of segmentable sets and the segmentation problem of Mumford and Shah, Communications in Information and Systems.
Ganev, S., Cloutier, A., Beauregard, R., Gendron, G. (2003), Effect of moisture content and density on moisture movement in MDF panels, Wood Fiber Sci., 35(1), pp. 68-82.
Blanchet, P., Beauregard, R., Cloutier, A., Gendron, G., Lefebvre, M. (2003), Evalutation of various engineered wood flooring constructions, Forest Prod. J., 53(5), pp. 30-37.
Ganev, S., Cloutier, A., Beauregard, R. (2003), Modélisation du gauchissement hygromécanique des panneaux MDF, 71e Congrès de l'ACFAS, Colloque « Le bois: un matériau pour bâtir l'avenir », UQAR, Rimouski, (Note: 20 mai).
Blanchet, P., Cloutier, A., Gendron, G., Beauregard, R. (2003), Modélisation de la déformation de tirant à coeur dans les lames de plancher d'ingénierie, 71e Congrès de l'ACFAS. Colloque « Le bois: un matériau pour bâtir l'avenir », UQAR, Rimouski, (Note: 20 mai).
Doyle, M., Tavoularis, S., Bourgault, Y. (2003), Computation of blood flow in a representative diaphragm-type ventricular assist device, The IASTED International Conference on Biomechanics, Rhodes, Greece, (Note: June 30-July 2).
Bourgault, Y., Ethier, M. (2003), Unstructured finite element method for a 3-D anisotropic bidomain model, Second MIT Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, (Note: June 17-20).
Tremblay, P., Bourgault, Y., Tavoularis, S. (2003), Control of discretization error for time-continuous space-time FEM through mesh movement, Second MIT Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, (Note: June 17-20).
Gander, M.J., Halpern, L. (2003), Méthodes de relaxation d'ondes pour l'équation de la chaleur en dimension 1, C. R. Acad. Sci., 336(1), Paris, pp. 519-524.
Gander, M.J., Ruehli, A.E. (2003), Solution of Large Transmission Line Type Circuits Using a New Optimized Waveform Relaxation Partitioning, EMI, Boston.
Girard, C., Dano, M.L., Picard, A., Gendron, G. (2003), Bearing Behavior of Mechanically Fastened Joints in Composite Laminates - Part I: Strength and Local Strains, Mechanics of Advanced Materials and Structures, 10(1), pp. 1-21.
Girard, C., Dano, M.L., Picard, A., Gendron, G. (2003), Bearing Behavior of Mechanically Fastened Joints in Composite Laminates - Part II: Failure Mechanisms, Mechanics of Advanced Materials and Structures, 10(1), pp. 23-42.
Moutee, M., Nabhani, M., Fortin, Y. (2003), Modélisation du comportement mécanique du bois sous séchage à moyenne et haute températures, 71e Congrès de l'ACFAS, Colloque « Le bois: un matériau pour bâtir l'avenir », Rimouski, (Note: 20 mai).
Cloutier, A., Ganev, S.; Deteix, J., Gendron, G. (2003), Modeling of MDF warping following ambient relative humidity changes, 37th International Particleboard/Composite Materials Symposium, Washington State University, Pullman, Washington, USA, (Note: 7 avril).
Dano, M.-L., Hyer, M. W., (2003), SMA-Induced Snap-Through of Unsymmetric Fiber-Reinforced Composite Laminates, International Journal of Solids and Structures, 40(22), pp. 5949-5972.
Gendron, G., Dano., M.L., Cloutier, A. (2003), A Numerical Study of the Hygro-Mechanical Deformation of Two Cardboard Layups, Composites Science and Technology Journal, Sous presse.
Dano, M.-L., Gauthier, G., Gendron, G. (2003), Manufacturing-Induced Distortion in Short-Glass Fibre-Reinforced Composite Materials, 4th Canadian International Conference on Composites, Ottawa, (Note: 19-22 août).
Dano, M.-L., Hyer, M.W. (2003), Use of SMA to Induce Snap-Through of Unsymmetric Laminates, 14th International conference on Composite Materials, San Diego, Californie, (Note: 14-18 juillet).
Bandrauk, A., Delfour, M.C., Lebris, C. (2003), Quantum Control: Mathematical and Numerical Challenges, CRM Lecture Notes and Proceedings, AMS Publ., R.I., 33.
Delfour, M.C. (2003), Optimization and Control with Respect to the Geometry, Proc. MMAR, 9th IEEE Int. Conf. on Methods and Models in Automation and Robotics, 1, Inst of Control Eng., Technical University of Szczecin, Pologne, pp. 25-30.
Deschênes, C. (2003), Considerations for low heard power plants, X Encontro Latino-Americano e do Caribe em Pequenos Aproveitamentos Hidroenergeticos, Brésil, (Note: 4-8 mai).
Dufresne, L., Dumas, G. (2003), A Spectral/B-spline Method for the Navier-Stokes Equations in Unbounded Domains, J. of Comp. Physics, 185(2), pp. 532-548.
Maciel, Y., Picard, D., Yan, G., Gleyzes, C., Dumas, G. (2003), Experiments on Rotating Turbulent Channel Flows, Proc. 9th Aerodynamics Symp., Canadian Aeronautics and Space Institute (CASI), Montreal, (Note: April).
Lemay, J., Dumas, G. (2003), Spray and Splash Generated by Heavy Vehicles: Road Test Measurments and Wind-Tunnel Modellilng, Proc. 7th Int. Symp. on Fluid Control, Measurement and Visualization, FLUCOME '03, Sorrento, Italy, (Note: August).
Fortin, Y., Guissi, A., Laghdir, A., Hernandez, R. (2003), A simple method for measuring the coefficients of the elasticity tensor of wood for 3-D drying stress modeling, IUFRO - All Division 5 Conference, Rotorua, N.Z., (Note: 11-15 mars).
Fouad E., Gakwaya, A. (2003), Modélisation du comportement viscoélastique d'une membrane thermoplastique par la méthode des éléments finis, Revue Européenne des éléments finis, 12(1), pp. 43-58.
Erchiqui, F., Gakwaya, A. (2003), Analysis of gaz pressure effect during the thermoplastic membrane forming using the dynamic finite element method, PPS-19, Annual Polymer Processing Society, Session 7: Blow moulding and Thermoforming, Melbourne, Australia, (Note: July 7-10).
Erchiqui, F., Gakwaya, A. (2003), Application de la méthode dynamique des éléments finis et la loi des gaz parfaits aux procédés de mise en forme de structures viscoélastiques minces, Compte-rendu du 6e colloque national en Calcul des structures(3), Giens, France, pp. 115-123, (Note: Mai).
Erchiqui, F., Gakwaya, A. (2003), Modélisation des interactions fluide-structure par une approche combinant les équations intégrales et la méthode des éléments finis, Canadian Society for civil engineering, 31th Annual Confrence, Moncton, N.B., (Note: June 4-7).
Faraji, A., Gakwaya, A., Cardou, A. (2003), A boundary element-mathematical programming method for solving elastoplastic problems, Proc. 25th Int. conf. on BEM, BEM25, Split, Croatia, (Note: September 8-10).
Faraji, A., Gakwaya, A., Cardou, A. (2003), A boundary element-mathematical programming method for solving elastic contact problems, Compte rendu 6e colloque national en Calcul des structures, 2, Giens, France, pp. 329-337, (Note: May).
Faraji, A., Gakwaya, A., Cardou, A. (2003), A boundary element-mathematical programming method for solving elastoplastic contact problems, 6th Int. Conf. in Computational and Exper. Contact Mechanics 2003, Crete, Greece, (Note: March 12-14).
Ahamadi, M., Gervais, J.J. (2003), Symbolic-numerical methods for the computation of normal forms of PDEs, Journal of Computational and Applied Mathematics, 158(2), pp. 443-472.
Guénette, R. (2003), Méthodes d'optimisation convexe appliquées à divers problèmes de mécanique, Institut des sciences mathématiques, Québec.
Le Roux, D., Carey, Graham F. (2003), Dispersion analysis of the least-squares finite-element shallow-water system, Int. J. Numer. Methods Fluids, 42, pp. 607-622.
Colin, E., Etienne, S., Pelletier, D., Borggaard, J. (2003), A General Sensitivity Equation Formulation for Turbulent Heat Transfer, Paper AIAA 2003--3636, 36th AIAA Thermophysics Conference, Orlando, FL, (Note: June 23-26).
Mahieu, J.-N., Etienne, S., Pelletier, D., Borggaard, J. (2003), A Second Order Sensitivity Equation Method for Laminar Flows, 11th Annual Conference of the CFD Society of Canada, Vancouver, (Note: May 28-30).
Hristova, H., Mahieu, J.-N., Etienne, S., Pelletier, D., Borggaard, J. (2003), Sensitivity analysis of transient non-linear heat conduction, 11th Annual Conference of the CFD Society of Canada, Vancouver, (Note: May 28-30).
Colin, E., Etienne, S., Pelletier, D., Borggaard, J. (2003), A Sensitivity Equation Method for Turbulent Heat Transfer, 11th Annual Conference of the CFD Society of Canada, Vancouver, (Note: May 28-30).
Etienne, S., Pelletier, D. (2003), Adaptive Solution of some Steady-State Fluid-Structure Interaction Problems, 11th Annual Conference of the CFD Society of Canada, Vancouver, (Note: May 28-30).
Mahieu, J.-N., Pelletier, D., Borggaard, J. (2003), A Second Order Sensitivity Equation Method for Laminar Flows, CASI 9th Aerodynamics Symposium, Montreal, (Note: April 28-30).
Dossou, K., Pierre, R. (2003), A Finite Element Solution of the von Karman Equations with Application to the analysis of mode interaction for a rectangular plate, SIAM Journal of scientific computing, 24(6), pp. 1994-2012.
Nastev, M., Lefebvfre, R., Therrien, R., Gelinas, P. (2003), Numerical Modeling of Lateral Landfill Gas Migration, Journal of Solid Waste Technology and Management, 29(4).
Dueri, S., Therrien, R., Locat, J. (2003), Numerical Simulation of the Migration of Dissolved Heavy Metals through a Subaqueous Capping Layer, Journal of Environnemental Engineering and Science, 2, pp. 213-226.
Dueri, S., Therrien, R., (2003), Factors Controlling Contaminant Transport through the Flood Sediments of the Saguenay Fjord: Numerical Sensitivity Analysis, Contaminated Sediments: Characterization, Evaluation, Mitigation/Restoration, and Management Strategy Performance, ASTM STP 1442, J. Locat, R. Galvez-Cloutier, R.C. Chaney, and K. Demars, Eds, ASTM International, West Conshohocken, PA, pp. 167-182.
Pelletier, D., Turgeon, E., Lacasse, D., Borggaard, J. (2003), Adaptivity Sensitivity and Uncertainty: Toward Standards of Good Practice in CFD, aiaa Journal, 41(10), pp. 1925-1933, (Note: October).
Dumas, G., Lemay, J. (2003), Splash and Spray Measurement and Control: Recent Progress, Aerodynamics of Heavy Vehicles, Sous presse.
Nabhani, M., Tremblay, C., Fortin, Y. (2003), Experimental determination of convective heat and mass transfer coefficients during wood drying, Proceedings of the 8th International IUFRO Wood Drying Conference, Transilvania University of Brasov, Romania, pp. 225-230.
François, V., Cuillière, J.C. (2003), An a priori adaptive 3Dadvancing front mesh generator integrated to solid modeling, Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publisher, pp. 337-346.
Fortin, Y., Nabhani, M., Tremblay, C., et Gendron, G. (2003), A simulation tool for the optimization of wood drying schedules, 53th Chemical Engineering Conference NSEERC (Strategic Grant 224297).
Blanchet, P., Cloutier, A., Gendron, G., Bearegard, R. (2003), Hygromechanical modellling of layered parquet using the finite element method, Proceedings of the Second International Conference of the European Society for Wood Mechanics, ESWM, Stockholm, Sweden, (Note: May 25-28).
Le Roux, D., (2003), Shallow-water models: stationary modes, the P1NC-P1pair, Conférence Internationale sur les mathématiques et applications aux problèms de développement au Sahel, Saint-Louis, Sénégal, pp. 7 pages, (Note: 15-19 décembre).
Khalloufi, S., Robert, J.-L., Ratti, C. (2003), Simulation mathématique de la cinétique de lyophilisation, Procédés biologiques et alimentaires (ISSN 1728-9882), 1, pp. 79-94.
Farhloul, M., Zine, A.M. (2003), A new mixed finite element method for viscoelastic fluid flows, International J. of Pure and Applied Mathematics, 7, pp. 93-115.
Manouzi, H., Brahmi, A., Farhloul (2003), Finite element approximation of bipolar viscous fluids, Computational and Applied Mathematics, 22, pp. 99-121.
Annie Turcotte (2003), Modélisation d'une population de plancton.
Girard, C., Dano, M.-L., Picard, A., Gendron, G. (2002), Experimental Study on Bearing Failure of Mechanically Fastened Joints in Composite Laminates, Proceedings of9th International Conference on Fibre Reinforced Composites, New Castle, U.K., pp. 308-315.
Dano, M.-L., Hyer, M. W. (2002), SnapThrough of Unsymmetric Fiber-Reinforced Composite Laminates, International Journal of Solids and Structures, 39(1), pp. 175-198.
N'Dri D., Garon, A., Fortin, A. (2002), Incompressible Navier-Stokes Computations with Stable and Stabilized Space-Time Formulations: a Comparison Study, Comm. Num. Meth. in Engineering, 18(7), pp. 495-512.
Valette, R., Laure, P., Demay, Y., Fortin, A. (2002), Numerical Computations of Interfacial Instabilities for the Two-Layer Poiseuille Flow of Viscoelastic Fluids, Proceedings of the Polymer Processing Society, Guimareas, Portugal, pp. 4 pages, (Note: juin).
Heuzey, M.C., Wood-Adams P., Fortin, A. (2002), Using Truncated Spectra in the Simulation of Viscoelastic Flows, Canadian Journal of Chem. Eng., 80(3), pp. 443-455.
Le Roux, D. (2002), , European Geophysical Society (EGS), Nice, France, (Note: avril).
Ait-Ali-Yahia, D., Baruzzi, G., Habashi, W.G., Fortin, M., Dompierre, J., Vallet, M.G. (2002), Anisotropic mesh adaptation: towards user-independent, mesh-independent and solver-independent CFD - Part II Structured grids, International Journal for Numerical Methods in Fluids, 39(8), pp. 657-673.
Dompierre, J., Vallet, M.G., Bourgault, Y., Fortin, M., Habashi, W.G. (2002), Anisotropic mesh adaptation: towards user-independant, mesh-independent and solver-independant CFD - Part III Unstructured meshes, International Journal for Numerical Methods in Fluids, 39(8), pp. 675-702, (Note: July).
Binois, C. (2002), Validation d'un élément de coque basé sur les équations de l'élasticité tridimensionnelle, pp. 67.
Vadot, Cécile (2002), Mise en oeuvre d'un modèle de séchage du bois par éléments finis, pp. 45.
Fortin, S. (2002), MEF++ Analyse des informations de compilation par un programme PHYTON, pp. 21.
Gartner, J.-X. (2002), Études des systèmes d'ancrage Monotoron, pp. 74.
Meddad, A., Azaiez, J., Ait-Kadi, A., Guénette, R. (2002), Micromechanical Modeling of Tensile Behavior of Short Fiber Composites, Journal of Composite Materials, 36(4), pp. 423-441.
Boulet, J.P., Guénette, R. (2002), A Non-conforming Optimized Schwarz Method for Finite element Problems, 14th International Conference on Domain Decomposition Methods, Cocoyoc, Mexico.
Savarmand, S., Carreau, P.J., Bertrand, F., Vidal, D. J.-E., Moan, M. (2002), Rheological Behavior of Aqueous Silica Suspensions, J. Rheol..
Tanguy, P. A., Bertrand, F., Ritz, J.-B., Giraud, E. (2002), Particle Migration in Stirred Tanks: CFD Simulations and Validations, Chem. Eng. Res. Des..
Hayes, R.E., Bertrand, F., Audet, C., Kolaczkowski, S.T. (2002), Catalytic Combustion Kinetics: Using Light-Off curves to Evaluate Kinetic Parameters, Can. J. Chem. Eng..
Bertrand, F., Thibault, F., Delamare, L., Tanguy, P.A. (2002), Adaptive Finite Element Simulations of Fluid Flow in Twin-Screw Extrusion, Computers and Chemical Engineering.
Alonso, S., Bertrand, F., Tanguy, P.A. (2002), A Torque-Based Analysis of the Reverse Roll Coating Process Stability, Chem. Eng. Sci..
Fourmanoit, S., Roy, R., Bertrand, F. (2002), Towards Best Achievable Floating Point Performance on Linear Algebra Computations for COTS Beowulf Clusters, in applications of High-Performance Computing in Engineering V, WIT Press, pp. 3-12.
Bertrand, F., Tanguy, P.A. (2002), Krylov-Based Uzawa Algorithms for the Solution of the Stokes Equations Using Discontinuous Pressure Tetrahedral Finite Elements, J. Comp. Phys., 181, pp. 617-638.
Bertrand, F., Desaulniers, E., Gange, T., Vidal, D. (2002), Numerical Models for the Packing of Blends of Spherical Pigments in Paper Coating, 11th Int. Conf. Coating Sci. and Tech. Symp., St-Paul, Minnesota, USA.
Dano, M.-L., Gendron, G., Mir, H. (2002), Mechanics of damage and degradation in random short glass fiber reinforced composites, Journal of Thermoplastic Composite Materials, 15(2), pp. 169.
Gendron, G., Arsenault, L. (2002), Basic computer and computing skills: A freshman core course at Université Laval, International Congress on Computational Science and Engineering, Reno, Nevada, USA.
Cloutier, A., Gendron, G., Dano, M.-L. (2002), Hygro-mechanical deformation behavior of cardboard: a numerical study, 14th US National Congress of Theoretical and Applied Mechanics, Blacksburg, Va, USA, (Note: 24-28 juin).
Ganev, S., Cloutier, A., Gendron, G., Beauregard, R. (2002), Finite Element Modeling of Warp in Medium Density FibErboard, 6th Pacific Rim Bio-Based Composites Symposium, Portland, Oregan, (Note: 10-13 novembre).
Heniche, M., Secretan, Y., Leclerc, M. (2002), Dynamic tracking of flow boundaries in rivers with respect to discharge, Journal of Hydraulic Research (IAHR), 40(5), pp. 589-602.
Dufresne, L., Dumas, G. (2002), A Spectral/B-spline Method for the Navier-Stokes Equations in Unbounded Domains, J. of Comp. Physics, (Note: December).
Dumas, G. Lemay, J. Bussières, M. (2002), Splash and Spray Measurement and Control: Recent Progress in Québec, Eng. Found. Conf.: The Aerodynamics of Heavy Vehicles, Montery-Pacific Grove, California, (Note: December).
Badertscher, N, Beaudoin, G., Therrien, R., Burkhard, M. (2002), Glarus overthrust: a major pathway for the escape of fluids out of the Alpine orogen, Geology, 30(10), pp. 875-878.
Morin, R., Thériault, T., Therrien, R., Michaud, Y. (2002), Generalized hydrogeologic properties of the Maritimes Carboniferous Basin from downhole measurements in selected wells, 3rd Joint IAH-CNC and GGS Groundwater Specialty Conference, Niagara Falls, (Note: October 20-23).
Boutin, A., Lefebvre, R., Martel, R., Paradis, D., Therrien, R. (2002), Numerical modelling of groundwater flow and dissolved TCE transport in the Valcartier area granular aquifer, Québec, Canada, 3rd Joint IAH-CNC and CGS Groundwater Specialty Conference, Niagara Falls, (Note: October 20-23).
Pontlevoy, O., Lefebvre, R., Therrien, R., Martel, R., Ouellet, M., Lamontagne, C. (2002), Regional groundwater modelling to support aquifer system management in the Ville Mercier area, Québec, 3rd Joint IAH-CNC and CGS Groundwater Specialty Conference, Niagara Falls, (Note: October 20-23).
Boutin, A., Lefebvre, R., Martel, R., Therrien, R., Parent, M., Paradis, D. (2002), Hydrogeological mapping and numerical modeling of a TCE plume in granular aquifer, Valcartier, Québec, Canada, GSA Annual meeting, Denver.
Dueri, S., Therrien, R., Locat, J. (2002), Controlling factors for contaminant transport through a sediment cap: the case of the flood sediments of the Saguenay Fjord, 36th Congress of the Canadian Meteorological and Oceanographic Society, Rimouski, Québec, (Note: May 22-25).
Beaulieu, J., Girard, B., Fortin, Y. (2002), Effect of drying treatments on warping of 36-year-old with spruce seed sources tested in a provenance trial, Ann. For. Sci., 59, pp. 503-509.
Tremblay, C., Fortin, Y. (2002), Modeling the conventional kiln drying process and comparison with experimental results, Proceedings of the Forest Products Society conference, Montréal, pp. 16 pages, (Note: Septembre).
Cuillière, J.C., François, V, (2002), A Set of New Tools for the automatic Meshing and Remeshing of Mechanical Parts, IDMME2000, (Note: Septembre).
François, V., Cuillière, J.C. (2002), Un mailleur frontal 3D à densité variable intégré aux modèles solides, IDMME2002, Clermont Ferrand (France), (Note: 14-16 mai).
François, V., Dompierre, J., Labbé, P., Vallet, M.G., Trépanier, J.Y. (2002), Mailleur frontal anisotrope d'une surface définie par un modèle géométrique solide, IDMME2002, Clermont-Ferrand (France), (Note: 14-16 mai).
Ilinca, F., Hétu, J.F., (2002), Design sensitivity analysis for gas-assisted injection molding, Journal of Injection Molding Technology, 6(3), pp. 194-202.
Ilinca, F., Hétu, J.F., Derdouri, A., Stevenson, J. (2002), Metal Injection Molding: 3D Modeling of Nonisothermal Filling, Polymer Engineering and Science, 42(4), pp. 760-770.
Ilinca, F., Hétu, J.F., (2002), Galerkin Gradient Least-Squares Solution of Transient Conduction Heat Transfer, Computer Methods in Applied Mechanics and Engineering, 191, pp. 3073-3097.
Ilinca, F., Hétu, J.F., (2002), Three-dimensional finite element solution of gas-assisted injection moulding, International Journal for Numerical Methods in Engineering, 53, pp. 2003-2017.
Ajersch, F., Ilinca, F., Hétu, J.F. (2002), Numerical analysis of the effect of temperature variation on flow in continuous galvanizing bath, 44th Mechanical Working and Steel Processing and 8th International Rolling Conference, Orlando, (Note: September 8-11).
Stevenson, J.F., Ilinca, F., Hétu, F., Derdouri, A., Bye, R. Chipke, P. (2002), Experimental Analysis and Simulation of Metal Injection Molding of a Flate Plate Cavity, 2002 World Congress on Powder Metallurgy & Particulate Materials, Orlando, (Note: June 16-21).
Ilinca, F., Derdouri, A., Hétu, J.F. (2002), Experimental and Numerical Investigation of the Flow Front Behavior in the Co-Injection Molding Process, PPS-18, 18th Annual Meeting of the Polymer Processing Society, Guimaraes, Portugal, (Note: June 21-24).
Ilinca, F., Hétu, J.F., Derdouri, A., Stevenson, J. (2002), Threee Dimensional filling and post-filling simulation of metal injection molding, ANTEC 2002, San Francisco, (Note: May 5-9).
Ilinca, F., Hétu, J.F., (2002), Design Sensitivity Analysis of Gas-Assisted Injection Molding, ANTEC 2002, San Francisco, pp. 5, (Note: May 5-9).
Ilinca, F., Hétu, J.F. (2002), Numerical Simulation of multi-material injection molding with application to gas-assisted and co-injection molding, SPE Topical Confeence on Emerging Technologies for the New Millennium, Montreal, (Note: September 20-21).
Turgeon, E., Pelletier, D., Ilinca, F. (2002), Compressible heat transfer computations by an adaptive finite element method, International Journal for Thermal Sciences, 41, pp. 721-736.
Pelletier, D., Turgeon, E., Borggaard, J. (2002), Sensitivity and Uncertainty Analysis of Aerodynamic Flows, Proceedings of ICAS, Toronto, (Note: September 8-13).
Borggaard, J., Pelletier, D., Vugrin, K. (2002), On sensitivity analysis for problems with numerical noise, AIAA 2002-5553, 9th AIAA/ISSMO Symposium on MDAO, Atlanta, Georgia, (Note: September 4-6).
Borggaard, J., Hétu, J.F., Pelletier, D. (2002), Parametric uncertainty analysis in phase change model, AIAA 2002-5601, 9th AIAA/ISSMO Symposium on MDAO, Atlanta, Georgia, (Note: September 4-6).
Pelletier, D. (2002), Reliable Sensitivity Analysis via an Adaptive Sensitivity Equation method, AIAA 2002-2758, 3rd AIAA Theoretical Fluid Mechanics meeting, St-Louis, MO, (Note: June 24-27).
Lacasse, D., Pelletier, D., Garon, A. (2002), An adaptive Finite Element Model for Hemolysis Prediction, 10th Annual Conference of the CFD Society of Canada, (Note: June 9-11).
Pelletier, D., Roache, P.J. (2002), CFD code verification and the method of manufactured solution, 10th Annual Conference of the CFD Society of Canada, (Note: June 9-11).
Borggaard, J., Hétu, J.F., Pelletier, D. (2002), Sensitivity and uncertainty analysis for conjugate phase change problems, 10th Annual Conference of the CFD Society of Canada, (Note: June 9-11).
Pelletier, D., Etienne, S., Turgeon, E., Borggaard, J. (2002), Uncertainty analysis for the k-epsilon model of turbulence, 10th Annual Coference of the CFD Society of Canada, (Note: June 9-11).
Turgeon, E., Pelletier, D., Borggaard, J. (2002), Sensitivity and uncertainty analysis for turbulent flows, AIAA 2002-0985, 40th AIAA Aerospace Sciences Meeting, Reno, NV, (Note: January 14-17).
Carrier, M., Garon, A., Farinas, M.I., Jullien, S. (2002), Accute in-Vivo Hemolysis Investigation of a New Axial Flow Pump for Left Ventricular Assist, Canadian Cardiovascular Congress, Edmonton, (Note: October 26-30).
Farinas, M.I., Jullien, S., Garon, A., Carrier, M. (2002), Identification of the Controller Parameters for a New LVAD through In Vivo Acute Implantations, 10th Congress of the International Society for Rotary Blood Pumps (ISRP 2002), Osaka, (Note: September 11-14).
Farinas, M.I., Garon, A., Jullien, S., Carrier, M., Savard, P. (2002), In Vivo Assessment of LVAD Work Output, XXIX Conference of European Society for Artificial Organs (ESAO 2002), Vienna, (Note: August 28-31).
Carrier, M., Garon, A., Farinas, M.I., Jullien, S. (2002), Developmental Phase of a New Axial Flow Pump for Left Ventricular Assist, 48th Annual Conference & Exposition of American Society for Artificial Organs (ASAIO), New York, (Note: June 13-15).
Gander, M.J., Magoules F., Nataf, F. (2002), Optimized Schwarz Methods without Overlap for the Helmholtz Equation, SIAM Journal on Scientific Computing, 24(1), pp. 38-60.
Gander, M.J., (2002), Preconditioners for Acoustic Problems: AILU, Special issue of the journal Revista de Acustica, XXXIII.
Gander, M.J., Golub, G.H. (2002), A Non-Overlapping Optimized Schwarz Method which Converges with Arbitrarily Weak Dependence on h, Proceedings of the 14th International Conference on Domain Decomposition.
Bourlioux, A., Gander, M.J. (2002), Modern Methods in Scientific Computing with applications, NATO Science Series II, Kluwer Acadamic Publishers, ISBN 1-4020-0782-5, 75(Série II).
Guénette, R., Youbissi, F.M., Fortin, M. (2002), Méthodes de dualité convexe pour la résolution par éléments finis de problèmes de contact en mécanique des solides, Rencontre d'hiver de la SMC, Ottawa, (Note: 8-10 décembre).
Delfour, M.C., Zolesio, J.P. (2002), Dynamical free boundary problem associated with an incompressible potential fluid flow in a time-varying domain, J. Differential Equation.
Delfour, M.C., Garon, A., Longo, V. (2002), Modeling and design of stents to optimize the effect of the dose, SIAM J. on Applied Mathematics.
Delfour, M.C. (2002), Modeling and control of symptotic shells, Control and Estimation of Distributed Parameter Systems, W. Desch, F. Kappel, and K. Kunisch, eds, pp. 105-120.
Deschênes, C. (2002), Sciences, ingénierie et technologie, Recherches Féministes (no. thématique), 15(1).
Farhloul, M., Fortin, M. (2002), Review and complements on mixed-hybrid finite element methods for fluids flows, Journal of Computational and applied Mathematics, 140, pp. 301-313.
Farhloul, M., Paquet, L. (2002), Refined mixed finite element method for elasticity problem in a polygonal domain, Numer. Methods Partial Differential Eq., 18, pp. 323-339.
Farhloul, M., Zine, A.M. (2002), A mixed finite element method for a Ladyzhenskaya model, Computer Methods in Applied Mechanics and Engineering, 191, pp. 4497-4510.
Farhloul, M., Zine, A.M. (2002), A new mixed finite element method for the Stokes problem, Journal of Mathematical Analysis and Applications, 276, pp. 329-342.
Deschênes, C. (2002), Sciences, ingénierie et technologie (no. thématique), Recherches Féministes, 15(1).
Williams, M., Klawe, M., Cannon, E., Deschênes, C., Frize, M., Muir, B. (2002), The NSERC/Industry Chairs for Women in Science and Engineering: a National Program in Canadian Universities, International Conference of Women Engineers and Scientist, Ottawa, (Note: 27-31 juillet).
Van Nieuwenhuyse, H. Descarries, F., Deschênes, C. (2002), Mère et ingénieure à la fois... Recherche exploratoire sur l'articulation travail-famille, International Conference of Women Engineers and Scientists, ICWES12, Ottawa, (Note: 27-31 juillet).
Deschênes, C., Fraser, R., Fau, J.P. (2002), New Trends in Turbine Modelling and New Ways of Partnership, IGHEM proceedings, (Note: June).
Fortier, I. Dionne, M.J., Lafortune, L., Solar, C., Thibault, A., Van Coillie-Tremblay, B., Deschênes, C. (2002), Des réflexions et des actions pour stimuler les femmes à poursuivre des carrières en sciences et en génie au Québec, International Conference of Women Engineers and Scientists ICWES12, Ottawa, (Note: Juillet).
Deschênes, C. (2002), La place des femmes en sciences et en génie au Québec, Compte rendu du Colloque 611 Congrès ACFAS 2002, Enjeux féministes: formes, pratiques, lieux et rapports de pouvoir, Les Cahiers de l'IREF.
Ganev, S., Cloutier, A. (2002), Effect of average panel density and density profile on the linear expansion of particleboard and MDF, 56th Forest Products Society Annual Meeting (Conférence invitée), Madison, Wisconsin, USA, (Note: 22-26 juin).
Ganev, S., Cloutier, A. (2002), Effect of average panel density and density profile on the linear expansion of particleboard and MDF, 36th International Wood Composites Materials Symposium (Affiche technique), Pullman, Washington, USA, (Note: 8-11 avril).
Bourgault, Y., Ethier, M. (2002), Simultation of electrophysiological waves with an unstructured finite element method, MS4CMS'02, INRIA-Rocquencourt, Paris, France, (Note: November 12-15).
Bourgault, Y. (2002), A mortar element for coupling hyperbolic and parabolic problems, 10th Annual Conference of the CFD Society of Canada, University of Windsor, Windsor, Ontario, (Note: June 9-11).
Tremblay, P., Bourgault, Y., Tavoularis, S. (2002), Time-accurate CFD through mesh adaptation on completely unstructured space-time grids, 10th Annual Conference of the CFD Society of Canada, University of Windsor, Windsor, Ontario, (Note: June 9-11).
Gander, M.J., Zhao, H. (2002), Overlapping Schwarz Waveform Relaxation for the Heat Equation in n-Dimensions, BIT, 42(4), pp. 779-795.
Gander, M.J. (2002), Preconditioners for Acoustic Problems, AILU, Special issue of the journal Revista de Acustica, XXXIII.
Gander, M.J., Golub, G. H. (2002), A Non-Overlapping Optimized Schwarz Method which Converges with Arbitrarily Weak Dependence on h, Proceedings of the 14th International Conference on Domain Decomposition.
Bertrand, F. (2002), Krylov-Based Uzawa Algorithms for the Solution of the Oseen Equations Using Discontinuous Pressure Tetrahedral Finite Elements, J. Comp. Phys..
Charbonneau, A. (2002), Une méthode adaptative d'éléments finis permettrant le calcul des modes propres d'un guide d'ondes optiques, Réunion d'hiver 2002, Société mathématique du Canada, Ottawa.
Charbonneau, A. (2002), Une méthode adaptative d'éléments finis permettrant le calcul des modes propres d'un guide d'ondes optiques, Réunion d'hiver 2002, Société mathématique du Canada, Ottawa.
Chtourou, H. Guillot, M., Gakwaya, A. (2002), Modeling of the Metal Powder Compaction Process Using the Cap Model. Part I: Experimental Material Characterization and Validation, Int. J. of Solids and Structures, 39, pp. 1059-1075.
Garon, A., Maseau, J. (2002), A Numerical Study of Albumin Transport through Normal and Damaged Endothelium, XXIX Conference European Society for Artificial Organs, Vienna, Austria, (Note: August 28-31).
Ganev, S., Cloutier, A., Beauregard, R., Gendron, G. (2002), Effect of Moisture Content and Density on Moisture Movement in MDF Panels, Wood and Fiber Science, 35(1), pp. 68-82.
Gervais, J.J., Sadiky, H. (2002), A New Steplength control for the Continuation with the Asymptotic-Numerical Method, IMA Journal of Numerical Analysis, 22, pp. 207-229.
Azaiez, J., Guénette, R. (2002), Numerical modelling of the flow of fibre suspension through a planar contraction, Canadian Journal of Chemical Eng., 80, pp. 1115-1125.
Turgeon, E., Pelletier, D. (2002), Verification and Validation in CFD using an Adaptive Finite Element Method, CASI Journal, 48(4), (Note: December).
Chérif, R., Robert, J.-L., Lagacé, R. (2002), Genetic Algorithm Calibration of Hydrologic Model, 5th International Conference on Hydroinformatics, Cardiff, UK, pp. 1414-1422.
Sena, M.J.S., Mesquita, A.L.A., Cruz, D.O., Secretan, Y. (2002), Eco-Informitica Usando Abordagem Integrada SIG - Elementos Finitos para Modelagem da Baia do Guajara, XV1 informazonia/SEPAI.
Turgeon, E., Pelletier, D., Borggaard, J. (2002), A General Continuous Sensitivity Equation Formulation for Complex Flows, Numerical Heat Transfer - Part B Fundamentals, 42(6), pp. 485-498.
Chtourou, H., Gakwaya, A., Guillot, M. (2002), Modeling of the metal-powder compaction process using the cap model. Part II: Numerical implementation and practical applications, Int. J. of Solids and Structures, 39, pp. 1076-1096.
Brezzi, F., Fortin, M. (2001), A minimal stabilisation procedure for mixed finite element methods, Numerische Mathematik, 89, pp. 457-491.
Heuzey, M.-C., Fortin, A., Dealy, J. (2001), Fluides viscoélastiques : modélisation numérique et mesures expérimentales, Revue européenne des éléments finis, 10(5), pp. 513-537.
Lambert, V., Dubé, D., Fortin, A., Bergeron, S. (2001), Heat transfer coefficient at mold/detal interface for AZ91 casting alloy by an inverse method, 40th annual conference of Metallurgists of CIM, Toronto, pp. 237-247, (Note: 26-29 août).
Valette, R., Laure, P., Demay, Y., Fortin, A. (2001), Convective instabilities in the coextrusion process, International Polymer Processing, 16(2), pp. 192-197.
Renversade, M. (2001), Adaptation de maillages 3D avec estimateur d'erreur hiérarchique, GIREF - Institut supérieur d'informatique, de modélisation et de leurs applications, Aubière - France, pp. 74, (Note: août).
Le Roux, D. (2001), Dispersion analysis of the shallow-water systems using the Least-Squares and discontinuous Galerkin methods, 6th Workshop on Computational Methods for Oceanic, Atmospheric and Ground Water Flows, Petropolis, Brésil, (Note: 4 septembre).
Le Roux, D. (2001), A New triangular finite-element with optimum constraint ratio for compressible fluids, SIAM J. Sci. Comput., 23, pp. 66-80.
Guichard, F., Bourget, E., Robert, J.-L. (2001), Scaling the influence of topographic heterogeneity on intertidal benthic communities: alternate trajectories mediated by hydrodynamics and shading, Marine Ecology Progress Series, 217, Germany, pp. 27-41, (Note: juillet).
Boivin, S., Cayré, F., Hérard, J.-M. (2001), Un schéma volumes finis pour la simulation d'écoulements diphasiques gaz-particules à deux phases incompressibles sur maillage triangulaire, Revue européenne des éléments finis, 10(5), pp. 539-574.
N'Dri, D., Garon, A., Fortin, A. (2001), A new stable space-time formulation for two-dimensional and three-dimensional incompressible viscous flow, International Journal of Numerical Methods in Fluids, 37(8), pp. 865-884.
Tessler, A., Annett, M.S., Gendron, G. (2001), A {1,2}-Order Plate Theory Accounting for Three-Dimensional Thermoelastic Deformations in Thick Composite and Sandwich Laminates, Composite Structures, 52(1), pp. 67-84, (Note: avril).
Dano, M.-L., Maillette, F., Gendron, G., Bissonnette, B. (2001), Damage modelling of random short glass fibre reinforced composites, 3e Conférence canadienne internationale sur les composites, Montréal, pp. 263-270, (Note: 21-24 août).
Gendron, G., Fortin, M., Goulet, P. (2001), Error Estimation and Edge-Based Mesh Adaptation for Solid Mechanics Problems, First MIT Conference on Computational Fluid and Solid Mechanics, Boston, (Note: 12-15 juin).
Cloutier, A., Gendron, G., Blanchet, P., Ganev, S., Beauregard, R. (2001), Finite element modelling of dimensional stability in layered wood composites, 35th International Particleboard/Composite Materials Symposium, Pullman, Washington, pp. 18 p., (Note: 3-5 avril).
Heuzey, M.-C., Wood-Adams, P., Fortin, A. (2001), Using truncated spectra in the simulation of viscoelastic flows, PPS 2001, Montréal.
Laure, P., Valette, R., Fortin, A. (2001), Numerical computations of two-layer Poiseuille flow for Maxwell fluids, PPS 2001, Montréal.
N'Dri, D., Garon, A., Fortin, A. (2001), Analysis of mixed and stabilized space-time finite element methods for the Navier-Stokes equations, 39th AIAA Aerospace Sciences Meeting and Exibit, AIAA 2001-0280, Reno, pp. 14 p., (Note: janvier).
Blanchet, P., Beauregard, R., Cloutier, A., Gendron, G. (2001), Behaviour and Modelling of Engineered Wood Parquet Under Various Relative Humidity Conditions, Forest Products Society Annual Meeting, Baltimore, (Note: June 24-27).
Garcia, R.A., Cloutier, A. (2001), Characterization of heat and mass transfer in the mat during hot pressing of MDF panels, 35th International Particleboard/Composite Materials Symposium, Pullman, Washington, (Note: 3-5 avril).
Xing, C., Riedl, B., Cloutier, A. (2001), Measurement of Urea-Formaldehyde Resin Coverage on Wood Fibers Surface by Laser Cofocal Microscopy, Forest Products Society Annual Meeting, Baltimore, (Note: 24-27 juin).
Ganev, S., Cloutier, A. (2001), Effect of average panel density and density profile on the linear expansion of particleboard and MDF, Composite Panel Association Fall Meeting, Québec, (Note: 15 octobre).
Toukourou, M.M., Gakwaya, A., Yazdani, A. (2001), An object oriented finite element implementation of large deformation frictional contact problems and applications, 1st MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, Massachussets, pp. 365-370, (Note: 12-15 juin).
Heniche, M., Secreten, Y., Leclerc, M. (2001), Efficient ILU preconditionning and inexact Newton-GMRES to solve the 2D steady shallow water equation, Comm. in Num. Meth. in Eng., 17(2), pp. 69-75.
Fortin, D., Bastien, J., Beaulieu, D. (2001), Étude expérimentale du comportement des assemblages boulonnés antiglissement en aluminium, 8e colloque sur la progression de la recherche portant sur les ouvrages d'art, Québec, pp. 10-1, 10-10, (Note: 8-9 mai).
Pigeon, M., Bissonnette, B., Jolin, M., Marchand, J., Bastien, J. (2001), Service life of concrete structures: Issues and challenges, Third International Conference on Concrete under Severe Conditions-Environment & Loading (CONSECO01), Vancouver, (Note: June 18-19).
Pierre, S., Saliah, H., Couture, M., Bastien, J., Duguay, M. Chomienne, M. (2001), Laboratoires virtuels et télé-laboratoires, Conférence annuelle de l'Association canadienne française pour l'avancement des sciences (ACFAS), Sherbrooke, (Note: mai).
Fortin, D., Beaulieu, D., Bastien, J. (2001), Experimental investigation of friction-type connections, 8th INALCO, Munich, (Note: March 28-30).
Fortin, D., Bastien, J., Beaulieu, D. (2001), Friction-type connections in aluminum structures, Canadian Society for Civil Engineering, 29th Annual Conference, Victoria, British Columbia, (Note: May 30 - June 2).
El Boukili, A., Bourgault, Y. (2001), Domain decomposition with mortar elements for hyperbolic problems, First MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, MA, (Note: June 12-14).
Le Roux, D. (2001), , European Geophysical Society (EGS), Nice, France, (Note: mars).
Bousmina, M., Aouina, M., Chaudhry, B., Guénette, R., Bretas, R.E.S. (2001), Rheology of polymer blends: non-linear model for viscoelastic emulsions undergoing high deformation flows, Rheol. Acta, 40, pp. 538-551.
Dossou, K., Fontaine, M., Charbonneau, A., Pierre, R. (2001), A Vector Finite Element modeling of Bragg grating waveguides using a transfer matrix method, ICIP/CIPI, Toronto, Ontario, (Note: 22 mai).
Charbonneau, A., Fontaine, M., Pierre, R., Dossou, K. (2001), A Vectorial analysis of the bound modes of optical waveguides by an adaptive finite element method, ICIP/CIPI, Toronto, Ontario, (Note: 22 mai).
Farhloul, M., Nicaise, S., Paquet, L. (2001), Some mixed finite element methods on anisotropic meshes, Mathematical Modelling and Numerical Analysis, 35, pp. 907-920.
Farhloul, M., Nicaise, S., Paquet, L. (2001), A refined mixed finite element method for the Boussinesq equations in polygonal domains, IMA Journal of Numerical Analysis, 21, pp. 525-551.
Manouzi, H., Farhloul, M. (2001), Mixed finite element analysis of a non-linear three-fields Stokes model, IMA Journal of Numerical Analysis, 21, pp. 143-164.
Tanguy, P.A., Bertrand, F., Thibault, F., Galy-Jammou, P. (2001), Polymer Melt Mixing: Modeling in 3D, The Encyclopedia of Materials Science and Technology, Elsevier, pp. 7425-7428.
Alonso, S., Bertrand, F., Tanguy, P.A. (2001), A CFD Assessment of Film Coating Process Viscosity Models, Can. J. Chem., Eng., 79, pp. 751-759.
Alonso, S., Bertrand, F., Réglat, O., Choplin, L., Tanguy, P.A. (2001), Process Viscosity in Reverse Roll Coating, Trans. IChEME Journal, 79, Part A, pp. 128-136.
Ritz, J.-B., Bertrand, F., Thibault, F., Tanguy, P.A. (2001), Shear-Induced Particle Migration in a Short-Dwell Coater, Chem. Eng., Sci., 55, pp. 4857-4867.
Bertrand, F., Ritz, J.-B., Tanguy, P.A., Giraud, E. (2001), Simulation of Shear-Induced Particle Migration in Stirred Tanks, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.
Secretan, Y., Leclerc, M., Duchesne, S., Heniche, M. (2001), Une méthodologie de modélisation numérique de terrain pour la simulation hydrodynamique bidimensionnelle, Rev. des Sciences de l'Eau, 14(2).
Dufresne, L., Dumas, G. (2001), A Spectral/B-spline Method for Unbounded Domains, Bulletin of the American Plysical Society, 46(10), pp. 32.
Fleck, B., Dumas, G. (2001), Direct Numerical Simulation of Centrifugal Flows, Int. J. of Num. Meth. for Heat and Fluid Flows, (Note: July).
Nastev, M., Therrien, R., Lefebvre, R., Gélinas, P. (2001), Landfill gas production and migration in landfills and geological materials, Journal of Contaminant Hydrology, 52(1-4), pp. 187-211.
Mailloux, M., Martel, R., Therrien, R., Lefebvre, R., Thiboutot, S., Ampleman, G. (2001), Numerical modelling of three-dimensional variably-saturated flow and transport of dissolved energetic materials at an anti-tank range, 2nd Joint IAH-CNC and CGS Groundwater Specialty Conference, Calgary, pp. 832-839, (Note: September 16-19).
Hamel, A., Therrien, R., Gélinas, P. (2001), Groundwater recharge of fractured rock aquifers in southwestern Québec, 2nd Joint IAH-CNC and CGS Groundwater Specialty Conference, Calgary, pp. 1078-1085, (Note: September 16-19).
Cloutier, V., Bourque, E., Lefebvre, R., Savard, M., Nastev, M., Martel, R., Therrien, R. (2001), Regional groundwater hydrogeochemistry of fractured rock aquifers in southwestern Quebec, 2nd Joint IAH-CNC and CGS Groundwater Specialty Conference, Calgary, pp. 1068-1077, (Note: September 16-19).
Karanta, G., Martel, R., Nastev, M., Therrien, R., Paradis, D., Lefebvre, R. (2001), Comparative study of methods for wellhead protection area delineation in fractured rock, 2nd Joint IAH-CNC and CGS Groundwater Specialty Conference, Calgary, pp. 1350-1357, (Note: September 16-19).
Hamel, A., Therrien, R., Gélinas, P. (2001), Groundwater recharge for fractured rock aquifers in southwestern Quebec, Fractured Rock 2001, Extended Abstract, Toronto, pp. 4 pages.
Lemieux, J.M., Kirkwood, D., Therrien, R. (2001), Detailed hydrogeological stucy of a fractured dolostone, Fractured Rock 2001, Extended Abstract, Toronto, pp. 4 pages.
Dueri, S., Therrien, R., Locat, J., Galvez-Coutier, R., Leroueil, S. (2001), Modeling the transport of heavy metals through a capping-layer: the case study of the flood sediments deposited in the Saguenay Fjord, Québec, GSA Annual meeting, 32(6), Boston.
Lemieux, J.M., Therrien, R., Kirkwood, D. (2001), Small-scale delineation and modeling of groundwater flow in a fractured dolostone, GSA Annual meeting, 32(6), Boston.
Hernandez, R., Bustos, C., Fortin, Y., Beaulieu, J. (2001), Machining properties of white spruce from plantation forests, Forest Prod. J., 51(6), pp. 82-88.
Yang, J.L., Fortin, Y. (2001), Evaluating strength properties of Pinus radiata from ultrasonic measurements on increment cores, Holzforschung, 55(6), pp. 606-610.
Ilinca, F., Hétu, J.F. (2001), Three-dimensional filling and post-filling simulation of polymer injection molding, International Polymer Processing Journal, 16(3), pp. 291-301.
Ilinca, F., Hétu, J.F. (2001), Modelo matematico ajuda a simular a injecao auxiliada por gas, Plastico industrial, III(34), pp. 40-47.
Ilinca, F., Hétu, J.F. (2001), Three-dimemsional simulation of co-injection molding, 2001 ASME International Mechanical Engineering Congress and Exposition, New York, (Note: November 11-16).
Ilinca, F,, Hétu, J.F. (2001), Simulation of threee dimensional transient heat transfer during polymer injection molding, 2001 ASME International Mechanical Engineering Congress and Exposition, New York, (Note: November 11-16).
Kabanemi, K,, Hétu, J.F., Derdouri, A. (2001), DSA Applied to Injection Molding: Injection Pressure and Multi-Gate Location Optimization, PPS 2001, Montreal, (Note: May 21-24).
Hétu, J.F., Ilinca, F. (2001), Three dimensional modeling and simulation of injection molding processes, 15th AIAA Conference on Computational Fluid Dynamics, Anaheim, AIAA 2001-2568, (Note: 11-14 juin).
Ilinca, F., Hétu, J.F. (2001), Three-dimensional numerical modeling of co-injection Molding, PPS-17, 17th Annual Meeting of the Polymer Processing Society, Montréal, (Note: 21-24 mai).
Ajersch, F., Ilinca, F., Malo, A., Perrault, M., Hétu, J.F. (2001), Numerical analysis of the effect of operation parameters on flow in a continuous galvanising bath, GALVATECH 2001, 5th International Conference on Zinc Alloy Coated Steel Sheet, Brussels, (Note: 26l-28 juin).
Ilinca, F., Hétu, J.F., (2001), Three-dimensional Simulation of Gas-Assisted Injection Molding, Molding 2001, New Orlean, (Note: 29-30 janvier).
Kabanemi, K., Hétu, J.F. (2001), Numerical Optimisation Tools for Injection Molding Design, Molding 2001, New Orlean, (Note: 29-30 janvier).
Ilinca, F., Hétu, J.F., Derdouri, S. (2001), Three-dimensional Simulation of Co-Injection Molding, Molding 2001, New Orlean, (Note: 29-30 juin).
Zhang, X.D., Pelletier, D., Trépanier, J.Y., Camarero, R. (2001), Numerical Assessment of Error Estimators for the Euler Equations, AIAA Journal, 39(9), pp. 1706-1715.
Lacasse, D., Turgeon, E., Pelletier, D. (2001), Prediction of Turbulent separated flow in a Turnaround Duct Using Wall Functions and Adaptivity, International Journal for CFD, 15(3).
Dufour, S., Pelletier, D. (2001), Computation of Multiphase Flows with Surface Tension using an Adaptive Finite Element Method, Numerical Heat Transfer-Part A, 40(4), pp. 335-363.
Borggaard, J., Pelletier, Turgeon, E. (2001), Parametric uncertainty Analysis for Thermal Fluid Calculations Nonlinear Analysis, Pergamon, Elsevier, 47, pp. 4533-4543.
Turgeon, E., Pelletier, D. (2001), Verification and Validation of Adaptive Finite Element Method for Impingement Heat Transfer, AIAA Journal of thermophysics, 15(3), pp. 284-292.
Turgeon, E., Pelletier, D., Ilinca, F. (2001), A Unified Formulation for Compressisble - Incompressisble flow simulation with mesh adaptation, AIAA Journal, 39(12), pp. 2425-2428.
Borggaard, J., Pelletier, D. (2001), A sensitivity equation method for conduction and phase change problems, Chap. 3 in Nonsmooth/Nonconvex Mechanics: Modeling, Analysis and Numerical Methods, Kluwer Academic Publishers, Dordrecht, Boston, London.
Pelletier, D., Borggaard, J. (2001), Sensitivity Analysis of Phase Change Problems, Center for Turbomachinery and Propulsion Researach, 15th Annual Meeting, Va. Tech., (Note: September).
Pelletier, D., Turgeon, E. Borggaard, J. (2001), Sensitivity and Uncertainty Analysis in Flow Simulations, International Conference on Multidisciplinary Design in Engineering, Montreal, (Note: November 21-22).
Pelletier, D., Borggaard, J. (2001), Sensistivity Equation Methods in CFD: issues and challenges, SIAM Control Conference, San Diego, (Note: July 11-14).
Turgeon, E., Pelletier, D., Borggaard, J. (2001), A General Continuous Sensitivity Equation formulation for the k-ε model of turbulence, AIAA-2001-3000, 31st Fluid Dynamics Conference, Anaheim, CA, (Note: June).
Turgeon, E., Pelletier, D., Borggaard, J. (2001), Application of a continuous Sensitivity Equation method to the k-ε model of turbulence, AIAA-2001-2534, 15th CFD, Anaheim, CA, (Note: June 11-14).
Lacasse, D., Turgeon, E., Pelletier, D., Martinuzzi, R. (2001), Prediction of Turbulent Flow around a Square Cross-Section Cylinder in the Proximity of a Solid Wall, AIAA 2001-3L002, 31st Fluid Dynamics Conference, Anaheim, CA, (Note: June 11-14).
Marrano, R., Camarero, R. Pelletier, D. (2001), LES of turbulent flow over a backward facing step using the dynamic mixed model, AIAA 2001-2841, 31st Fluid Dynamics Conference, Anaheim, CA, (Note: June).
Zhang, X.D., Pelletier, D., Trépanier, J.Y. et autres (2001), Mesh adaptation using different error indicators for the Euler equations, AIAA 2001-2549, 15th CFD Conference, Anaheim, CA, (Note: June 11-14).
Turgeon, E., Pelletier, D., Borggaard, J. (2001), Computation of airfoil flow derivatives using a continuous sensitivity equation method, CASI, 8th Aerodynamics Symposium, Toronto, (Note: April 20- May 2).
Lacasse, D., Turgeon, E. Pelletier, D. (2001), Adaptive computation of Turbulent flow around a square cyclinder in proximity of the ground, 9th Annual Conference of the CFDSC, Waterloo, (Note: May 27-29).
Pelletier, D. (2001), Should we still teach CFD?, 9th Annual Conference of the CFDSC, Waterloo, (Note: May).
Turgeon, E., Pelletier, D., Borggaard, J. (2001), Sensitivity and uncertainty analysis for the k-epsilon model of turbulence, 9th Annual Conference of the CFDSC, Waterloo, (Note: May 27-29).
Pelletier, D., Turgeon, E., Borggaard, J. (2001), Sensitivity and Uncertainty Analysis for Variable Property Flows, AIAA 2001-0139, 39th Aerospace Sciences Meeting, Reno, NV, (Note: January 8-11).
Zhang, X.D., Pelletier, D., Trépanier, J.Y., Camarero, R. (2001), Error Control and Mesh Adaptation for the Euler Equations, AIAA 2001-0441, 39th Aerospace Sciences Meeting, Reno, NV, (Note: January).
Lacasse, D., Turgeon, E., Pelletier, D. (2001), Prediction of Turbulent separated flow on smooth surfaces using wall functions and Adaptivity, AIAA 2001-0448, 39th Aero, Sciences Meeting, Reno, NV, (Note: January 2001).
Pelletier, D., Turgeon, E., Lacasse, D., Borggaard, J. (2001), Adaptivity, Sensitivity and Uncertainty: Towards Standards in CFD, AIAA 2001-0653, 39th Aerospace Sciences Meeting, Reno, NV, (Note: January 8-11).
Lacasse, D., Turgeon, E. Pelletier, D. (2001), On the judicious Use of the k-epsilon Model, Wall functions and Adaptivity, AIAA 2001-0882, 39th Aerospace Sciences Meeting, Reno, NV, (Note: January 8-11).
Gander, M.J., Halpern, L. (2001), Un algorithme discret de décomposition de domaines pour l'équation des ondes en dimension, C. R. Acad. Sci. Paris, T. 333(Série I), pp. 699-702.
Gander, M.J., Nataf, F. (2001), AILU for Helmholtz Problems: a New Preconditioneer Based on the Analytic Parabolic Factorization, Journal of Computational Acoustics, 9(4), pp. 1499-1506.
Steiner, A., Gander, M.J., (2001), Erhaltung der Artenvielfalt durch Migration, Il Volterriano 8, pp. 31-42.
Gander, M.J., Halpern, L. (2001), Méthodes de décomposition de domaines pour l'équation des ondes en dimension 1, C. R. Acad. Sci. Paris, t. 333, pp. 589-592.
Steiner, A., Pini, F., Gander, M.J. (2001), Sistemi competitivi, Il Volterriano 8, pp. 19-30.
Gander, M.J., Karp, A. H. (2001), Stable Computation of High Order Gauss Quadrature Rules Using Discretization, Journal of Quantitative Spectroscopy and Radiative Transfer, 68(2), pp. 213-223.
Gander, M.J. (2001), Optimized Schwarz Methods for Helmholtz Problems, Proceedings of the 13th Conference on Domain Decomposition, pp. 245-252.
Daoud, S. Daoud, Gander, M.J. (2001), Overlapping Schwarz Waveform Relaxation for Convection Reaction Diffusion Problems, Proceedings of the 13th International Conference on Domain Decomposistion, pp. 227-233.
Gander, M.J., Halpern, L., Japhet, C. (2001), Optimized Schwarz Algorithms for Coupling Convection and Convection-Diffusion Problems, Proceedings of the 13th International Conference on Domain Decomposition, pp. 253-260.
Delfour, M.C. (2001), Modeling and control of asymptotic shells, International Series of Numerical Mathematics (8th conference on Control of Distributed Paramater Systems in Maria Trost), Birkhäuser Verlag, 143, Graz, Autriche, pp. 16 p, (Note: July 15-21).
Delfour, M.C., Bernadou, M. (2001), Intrinsic asymptotic model of piezoelectric shells, Optimal Control of Complex Structures, G, J,-H. Hoffmannn, I. Lasiecka, G. Leugering, J. Sprekels, F. Tröltzsch eds., ISNM 139, Birkhäuser-Verlag (Proceedings of the International Conference on Optimal Control of Complex Structures, mathematisches Forschungs Institut Oberwolfach, Allemagne, June 4-10, 2000), Berlin, pp. 59-72.
Delfour, M.C., Zolesio, J.P. (2001), Tangential calculus and shape derivatives, Shape Optimization and Optimal Design, J. Cagnol, M.P. Polis and J.P. Zolésio, eds, Marcel Dekker, New York (Proceedings of the IFIP Conference, Cambridge, UK, July 1999), Chap. 3, pp. 37-60.
Deschênes, C., Foisy, M. (2001), Promotion des carrières scientifiques auprès des jeunes femmes au Canada: réseaux et expériences éducationnelles, Atelier 8, Les femmes et/dans la société de l'information. Voix de femmes sur Internet, Global CN 2001 II, 11e Congrès Mondial de Réseaux Citoyens, Buenos Aires, Argentine, (Note: 5-7 décembre).
Charbonneau, A. (2001), Analyse vectorielle des modes propres d'un guide d'ondes optiques par une méthode adaptative d'éléments finis, Université d'Ottawa, (Note: 22 février).
Charbonneau, A. (2001), Analyse vectorielle des modes propres d'un guide d'ondes optiques par une méthode adaptative d'éléments finis, Université d'Ottawa, (Note: 22 février).
Erchiqui, F., Deerdouri, A., Gakwaya, A. Verron, E. (2001), Analyse expérimentale et numérique en soufflage libre d'une membrane thermoplastique, Entropie(235-236), pp. 118-125.
Yu, Z., Gakwaya, A. (2001), Reconstructing nurbs surface from randomly digitized points, Revue de CFAO et d'informatique graphique, 16(3), pp. 339-356.
Garon, A., Jullien, S., Manseau, J. (2001), Modelisation of Local Mass Transfer from an Endovascular Device, ASME-AICHE-AIAA, 35th National Heat Transfer Conference, Anaheim, California, (Note: June 10-12).
Karanta, G., Martel, R., Nastev, M., Therrien, R., Paradis, D., Lefebvre, R. (2001), Comparative study of methods for wellhead protection area delineation in fractured rock, 2nd Joint IAH-CNC and CGS Groundwater Specialty Conference, Calgary, pp. 1350-1357, (Note: September 16-19).
Cloutier, A., Ganev, S., Gendron, G., Blanchet, P., Beauregard, R. (2000), Finite element modeling of warping in layered wood composites, 9th Chilean Conference and the First Iberian and Latin-American Conference on Forest Products Reaserch, Concepción, Chili, (Note: octobre).
Blanchet, P., Cloutier, A., Riedl, B. (2000), Particleboard made from hammer milled black spruce bark residues, Wood Science Technology, 34, pp. 11-19.
Habashi, W.G., Dompierre, J., Bourgault, Y., Ait-Ali-Yahia, D., Fortin, M., Vallet, M.-G. (2000), Anisotropic mesh adaptation: towards user-independent, mesh-independent and solver-independent CFD.Part I: general principles, International Journal for Numerical Methods in Fluids, 32(6), pp. 725-744.
Le Roux, D., Lin, C.A., Staniforth, A. (2000), A Semi-implicit semi-lagrangian finite-element shallow-water ocean model, Monthly Weather Review, 128, pp. 1384-1401.
Pichelin, É., Fortin, M., Boivin, S. (2000), Étude numérique d'estimations d'erreur a posteriori, Revue européenne des éléments finis, 9(4), pp. 467-486.
Boivin, S., Cayré, F., Hérard, J.-M. (2000), A finite volume method to solve the Navier-Stokes equations for incompressible flows on unstructured meshes, Int. J. Therm. Sci.(39), pp. 806-825.
Dano, M.-L., Gendron, G., Mir, H. (2000), Mechanics of damage and degradation in random short glass fiber reinforced composites, 15th Annual Technical Conference of the American Society for Composites, Texas, pp. 30-37, (Note: 24-27 septembre).
Fortin, A., Guénette, R., Pierre, R. (2000), On the discrete EVSS Method, Comp. Meth. Appl. Mech. Eng., 189(1), pp. 121-139.
Fortin, A., Béliveau, A., Heuzey, M.-C., Lioret, A. (2000), Ten years using discontinuous Galerkin Method for polymer processing problems, Discontinuous Galerkin Methods, Theory, Computation and Applications, 11, Cockburn, Bernardo and Karniadakis, GeorgeE. and Shu, Chi-Wang, Springer Berlin Heidelberg, pp. 321-326.
Guénette, R., Fortin, A., Marcotte, J.-P., Labbé, J., (2000), Iteratives solvers for generalised Stokes problems, 8e Conférence annuelle de la Société canadienne de CFD, Montréal, pp. 619-624, (Note: juin).
N'Dri, D., Garon, A., Fortin, A. (2000), Stable vs stabilized space-time formulations for the Navier-Stokes equations, 8e Conférence annuelle de la Société canadienne de CFD, Montréal, pp. 71-78, (Note: juin).
Defo, M., Cloutier, A., Fortin, Y. (2000), Modeling vacuum-contact drying of wood: The water potential approach, Drying Technology, 18(8), pp. 1737-1778.
Lihra, T., Cloutier, A., Zhang, S.Y. (2000), Longitudinal and transverse permeability of balsam fir wetwood and normal heartwood, Wood Fiber Sci., 32(2), pp. 164-178.
Tremblay, C., Cloutier, A., Fortin, Y. (2000), Experimental determination of the convective heat and mass transfer coefficients for wood drying, Wood Sci. Technol., 34(3), pp. 253-276.
Tremblay, C., Cloutier, A., Fortin, Y. (2000), Determination of the effective water conductivity of red pine sapwood, Wood Sci. Technol., 34(2), pp. 109-124.
Therrien, J., Bissonnette, B., Cloutier, A. (2000), Early-age evolution of the mass transfer properties in mortar and its influence upon ultimate shrinkage, Shrinkage 2000 - RILEM, Paris, pp. 22 p., (Note: 16-17 octobre).
Gauvin, K., Guillot, M., Gakwaya, A., Pelletier, F. (2000), A new approach for predicting the tool strength during compaction, Advances in powder metallurgy and particulate materials, metal powder industries federation, Princeton, New Jersey.
Gakwaya, A., Hrairi, M., Guillot, M. (2000), Inverse mathematical modelling and identification in metal powder compaction process, Metallurgist conference MetSoc2000, Ottawa, (Note: août).
Guillot, M., Gakwaya, A., Chtourou, H. (2000), A new approach for lowering the risk of cracking during the compaction of PM components, Advances in Powder Metallurgy and Particulate Materials, Metal Powder Industries Federation, Princeton, NJ.
Farzaneh, M., Volat, C., Gakwaya, A. (2000), Electric field calculation around ice-covered insulator using the boudary element method, IEEE International symposium on electrical insulation, Anaheim, California, pp. 349-355, (Note: avril).
Volat, C., Farzaneh, M., Gakwaya, A. (2000), Voltage and field distribution around a post insulator covered with atmospheric ice, 9th International workshop on atmospheric icing of structures, Chester, U.K., pp. session 4b, (Note: juin).
Hrairi, M., Gakwaya, A., Guillot, M. (2000), Modélisation et identification inverse des paramètres matériels par la MEF, Colloque coopération France-Québec, ACFAS, Montréal, (Note: 16 mai).
Chorfi, L., Ibrahimbegovic, A., Gakwaya, A. (2000), Couplage thermomécanique et problèmes de localisation en grandes déformations viscoplastiques, Colloque coopération France-Québec, ACFAS, Montréal, (Note: 16 mai).
Dano, M.-L., Gendron, G., Picard, A. (2000), Stress and Failure Analysis of Mechanically Fastened Joints, Composite Structures, 50(3), pp. 278-296.
Dano, M.-L., Gendron, G., Picard, A. (2000), Mechanical Behavior of a Triaxial Woven Fabric Composite, Journal of Composite Material and Structures, 7(2), pp. 207-224.
Morin, J., Boudreau, Y., Secretan, Y, Leclerc, M. (2000), Pristine Lake Saint-François, St-Lawrence river: Hydrodynamic Simulation & Cumulative Impact, J. of Great Lakes Research, 26(4), pp. 384-401.
Morin, J., Leclerc, M., Secretan, Y., Boudreau, P. (2000), Integrated two-dimensional macrophytes-hydrodynamic modeling, Journal of Hydraulic Research (IAHR), 38(3), pp. 163-172.
Heniche, M., Secretan, Y., Boudreau, P. (2000), A two dimensional finite element drying-wetting shallow water model for rivers and estuaries, Advances in Water Resources, 23, pp. 359-372.
Picard, A., Bastien, J., Massicotte, B. (2000), Analysis of continuous beams prestressed with localized tendons, ASCE J. Struct. Eng., pp. 262-265, (Note: février).
Bastien, J., Desgagné, G., Giasson, G. (2000), Étude du potentiel d'utilisation de la méthode RIMT, 7e colloque sur la progression de la recherche portant sur les ouvrages d'art, Québec, pp. 13-1, 13-5, (Note: 8-9 mai).
Fortin, D., Bastien, J. Beaulieu, D. (2000), Comportement des assemblages boulonnés antiglissement en aluminium, 7e colloque sur la progression de la recherche portant sur les ouvrages d'art, Québec, pp. 12-1, 12-6, (Note: 8-9 mai).
St-Pierre, C., Warzee, J., Bastien, J. (2000), Laboratoires virtuels et laboratoires à distance-projet Télélabs, Colloque sur les applications pédagogiques des technologies de l'information et des communications (CAPTIC), Québec, (Note: 25-28 avril).
Duguay, M., Bastien, J. et al. (2000), Applications pédagogiques d'un laboratoire virtuel et réel accessible par Internet à l'aide de la technologie JAVA 3D, Conférence annuelle de l'Association canadienne française pour l'avancement des sciences (ACFAS), Québec, (Note: mai).
Ritz, J.-B., Bertrand, F., Thibault, F., Tanguy P.A. (2000), Shear-Induced Particle Migration in a Short-Dwell Coater, Chem. Eng. Sci., 55, pp. 4857-4867.
Hayes, R.E., Bertrand, F., Tanguy, P.A. (2000), Modelling of Fluid/Paper Interaction in the Application Nip of a Film Coater, Transport in Porous Media, 40, pp. 55-72.
Alonso, S., Tanguy, P.A., Réglat, O., Bertrand, F. (2000), Process Viscosity in a Film Coater, Paperi ja Puu, 82(1), pp. 34-40.
Mmbaga, J.P., Hayes, R.E., Bertrand, F., Tanguay, P.A. (2000), Simulation of Dewtering and Immobilization During Paper Coating, 50th CSChE Conference, Montréal.
Thibault, F., Bertrand, F., Tanguy, P.A. (2000), Simulation of Fluid Flow in Twin-Screw Extruders, 50th CSChE Conference, Montreal.
Thibault, F., Bertrand, F., Tanguy, P.A., Delamare, L. (2000), A Local Refinement Based Fictitious Domain Method: Application to the Simulation of Fluid Flow in a Twin-Screw Extruder, CFD 2000, Montréal.
Bourgault, Y., Beaugendre, H., Habashi, W.G. (2000), Development of a Shallow Water Icing Model in FENSAP-ICE, Journal of Aircraft, 37, pp. 640-646.
Bourgault, Y., Boutanios, Z., Habashi, W.G. (2000), An Eulerian Approach to 3D DROPLET Impingement Simulation Using FENSAP-ICE. Part I: Model, Algorithm and Validation, Journal of Aircraft, 37, pp. 95-103.
St-Hilaire, A., Sabourin, M., Deschênes, C. (2000), The Prediction of Cavitation Hydrodynammic Aggressiveness, 20th IAHR Symposium, Charlotte, North Carolina, (Note: August 6-9).
St-Hilaire, A., Sabourin, M., Deschênes, C. (2000), New Tool for Cavitation Analysis, Hydro Vision 2000 Conference, Charlotte, North Carolina, (Note: August 8-11).
Elkadri, N.E., Soulaimani, A., Deschênes, C. (2000), A Finite Element Formulation of Comprehensible Flows Using Various Set of Independant Variables, Comp. Meth. in Applied Mech. Eng., 181(1-3), pp. 161-189.
Farhloul, M., Nicaise, S., Paquet, L. (2000), A mixed formulation of Boussinesq equations: Analysis of non-singular solutions., Mathematics of Computation, 69, pp. 965-986.
Farhloul, M., Nicaise, S., Paquet, L. (2000), Refined mixed finite element method for the Boussinesq equations in polygonal domains, C.R. Acad. Sci., Série I 331, pp. 143-148.
Mongrain, R., Garon, A., Bertrand, M., Gautrin, H.-F., Bertrand, O.-F. (2000), Minimization of boundary layer shear stress over occluders of mechanical heart valves using quasi-anlytical method, Journal of Biomechanics, (Note: Août).
Fourgau, P., Kempenaars, M., Garon, A., Mongrain, R. (2000), Numerical Prediction of Hemolysis Rate: Past and Recent Approaches, Artificial Organs, (Note: mars).
Jullian, S., Garon, A., Bertrand, O.F., Mongrain, R. (2000), A Numerical Model For Local Delivery in Stent Design, ASME Journal of Biomechanical Engineering, (Note: mars).
Fortin, M., Pichelin, É., Boivin, S. (2000), Étude numérique de quelques estimateurs d'erreur, Revue européenne des éléments finis, 9, pp. 467-486.
Massicotte, M.-A. (2000), Algorithme de détection de cassures, pp. 20.
Julien, S., Maciel, Y., Dumas, G., Lemay, J. (2000), Experimental Set-Up for the Study of Separated Turbulent Boundary Layers, FLUCOME 2000- 6th Int. Symp. on Fluid Control, Measurement and Visualization, Sherbrooke, (Note: August).
Dufresne, L., Dumas, G. (2000), DNS of Free Vortical Flows in Cylindrical Coordinates: Boundary Conditions and Local Radial Interpolation, CFD2K, Proc. 8th Annual Conf., CFD Society of Canada, Montréal, pp. 405-412, (Note: June).
Houde, S., Duams, G., Dufresne, L. (2000), Utilisation et avantages d'une approche par zones modales pour un code quasi-spectral en géométrie cylindrique, CFD2K, Proc. 8th Annual conf., CFD Society of Canada, Montréal, pp. 55-62, (Note: June).
Therrien, R., Sudicky, E.A. (2000), Well bore boundary conditions for variably-satured flow modeling, Advances in Water Resources, 24, pp. 195-201.
Murat, V., Martel, R., Michaud, Y., Therrien, R., Fagnan, N. (2000), Étude comparative des méthodes d'évaluation de la vulnérabilité des acquifères à la pollution: Application aux aquifères granulaires du piémont laurentien, Québec, Canada, 1st JOint IAH-CNC and CGS Groundwater Specialty Conference, Montréal, pp. 411-418.
Larose-Charette, D., Lefebvre, R., Fagnan, N., Michaud, Y., Therrien, R. (2000), Groundwater flow dynamics in unconfined deltaic aquifers of the Portneuf area, Québec, Canada, 1st Joint IAH-CNC and CGS Groundwater Specialty Conference, Montréal, pp. 285-292.
Bernardez, L,, Therrien, R., Lefebvre, R., Martel, R. (2000), Numerical simulation of soil column experiments of diesel recovery using micellar solutions, 1st Joint IAH-CNC and CGS Groundwater Specialty Conference, Montréal, pp. 165-172.
Michaud, Y., Therrien, R. and 14 autres (2000), La cartographie hydrogéologique régionale: Un exemple d'application des systèmes d'information géographique (SIG) pour la gestion des ressources en eau souterraine, 1st Joint IAH-CNC and CGS Groundwater Specialty Conference, pp. 293-300.
Savard, M.M., Therrien, R. and 23 others (2000), Regional hydrogeology of the fractured-rock aquifers of southwestern Quebec (St-Lawrence Lowlands), Québec, Canada, 1st Joint IAH-CNC and CGS Groundwater Specialty Conference, Montréal, pp. 247-253.
Martel, R., Foy, S., Saumure, L., Roy, L., Lefebvre, R., Gélinas, R., Therrien, R. (2000), PCB recovery under a building with an in situ technology using micellar solutions, 1st Joint IAH-CNC and CGS Groundwater Specialty Conference, Montréal, pp. 181-186.
Hamdi, LY., Robert, J.L., Therrien, R. (2000), Numerical modelling of natural groundwater recharge, Computational Methods in Water Resources XIII, Bentley et al. (eds), Calgary, pp. 1101-1106, (Note: June 25-29).
Ghogomu, N.F., Therrien, R. (2000), Reactive mass transport modelling in discretely-fractured porous media, Invited paper, Computational Methods in Water Resources XIII, Bentley et al. (eds), Calgary, pp. 285-292, (Note: June 25-29).
Ghogomu, N.F., Therrien, R., Lefebvre, R. (2000), Simulating multicomponent reactive transport in discretely-fractured carbonate aquifer, GSA Annual meeting, 32, Reno.
François, V., Cuillère, J.C. (2000), Automatic mesh pre-optimization based on the geometric discretization error, Advances In Engineering Sofware, 31(10), pp. 763-774.
François, V., Cuillière, J.C. (2000), 3D Automatic remeshing applied to model modification, Computer-Aided Design, 32(7), pp. 433-444.
Cuillère, J.C., François, V. (2000), A Set of New Tools for the Automatic Meshing and Remeshing of Mechanical Parts, IDMME 2000, Montréal, (Note: Mai).
Ilinca, F., Hétu, J.F., Pelletier, D. (2000), On Stabilized Finite Element Formulations for Incompressible Advective-Diffusive Transport and Fluid Flow Problems, Computer Methods in Applied Mechanics and Engineering, 188, pp. 235-255.
Ilinca, F., Hétu, J.F. (2000), Finite Element Solution of 3D Turbulent Flows Applied to Mould-Filling Problems, International Journal for Numerical Methods in Fluids, 34, pp. 729-750.
Hétu, J.F., (2000), Modeling and simulation of the injection molding process: issues and challenges, 8e Conférence annuelle de la Société Canadienne de CFD, Montréal, (Note: 11-13 juin).
Hétu, J.F., Ilinca, F., Audet, M. (2000), Numerical Simulation of Turbulent Mould Filling, COM 2000: Mathematical Modelling in the Metal Processing and Manufacturing Symposium, Ottawa, (Note: 20-23 août).
Ilinca, F., Hétu, J.F. (2000), 3D Simulation of the Packing-Cooling Stage in Polymer Injection Molding, ANTEC 2000, Orlando, Florida, (Note: 7-11 mai).
Ilinca, F., Hétu, J.F., (2000), 3D Numerical Simulation of Gas-Assisted Injection Molding Process, ANTEC 2000, Orlando, Florida, (Note: 7-11 mai).
Ilinca, F., Hétu, J.F., Derdouri, A., Holmes, B. Scott, C., Stevenson, J. (2000), Metal Injection Molding: Simulation of Three-Dimensional Flow with Free Surface Boundary and Experimental Observation, ANTEC 2000, Orlando, Florida, (Note: 7-11 mai).
Ilinca, F., Hétu, J.F., Audet, M. (2000), A 3D Solution Algorithm for the Simulation of the Packing-Cooling Stage in Polymer Injection Molding, 8e Conférence annuelle de la Société Canadienne de CFD, Montréal, (Note: 11-13 juin).
Kabanemi, K.K., Hétu, J.F., Derdouri, A. (2000), Design Sensitivity Analysis Applied to Injection Molding: Injection Pressure and Multi-Gate Location Optimization, Symposium on CAE and Related Innovations for Polymer Processing 2000 ASME International Mechanical Engineering Gongres and Exposition, in CAE and Related Innovations for Polymer Processing, Orlando, Florida, (Note: November 5-10).
Ilinca, F., Hétu, J.F., Perrault, M., Derdouri, A., Scott, C., Stevenson, J. (2000), 3D Simulation of Metal Injection Molding with Free-Surface Boundary Conditions: Jetting and Nonuniform Flow, International Conference on Powder Metallurgy & Particulate Materials 2000, New York, (Note: 30 mai-3 juin).
Ilinca, F., Hétu, J.F., Derdouri, A., Holmes, B., Scott, C., Stevenson, J. (2000), Three-Dimensional Simulation of Powder Injection Molding: Influence of Temperature on Flow Stability, 8e Conférence annuelle dela Société Canadienne de CFD, Montréal, (Note: 11-13 juin).
Ilinca, F., Hétu, J.F., Derdouri, A., Holmes, B., Scott, C., Stevenson, J. (2000), Three Dimensional Modeling of Metal Powder Injection Molding, COM 2000: Mathematical Modelling in the Metal Processing and Manufacturing Symposium, Ottawa, (Note: 20-23 août).
Stevenson, J., Scott, C., Borst, L., Ilinca, F., Hétu, J.F., Derdouri, A, (2000), Metal Injection Molding with Aqueous Binder Systems: Advanced Process Technology, PIM 2000, Penn State University, USA, (Note: March 20-22).
Ilinca, F., Hétu, J.F., Audet, M. (2000), A 3D Solution Algorithm for the Simulation of the Packing-Coling Stage in Polymer Injection Molding, CFD2K, 8e Conférence annuelle de la Société Canadienne de CFD, Montréal, (Note: 11-13 juin).
Ilinca, ., Hétu, J.F., Derdouri, A., Holmes, B., Scott, C., Stevenson, J. (2000), Three-Dimensional Simulation of Powder Injection Molding: Influence of Temperature and Yield Stress on Flow Stabililty, CFD2K, 8e conférence annuelle de la Société Canadienne de CFD, Montréal, (Note: 11-13 juin).
Stevenson, J., Scott, C., Ilinca, F., Hétu, J.F., Derdouri, A. (2000), Metal Injection Molding with Aqueous-Based Binders, PIM 2000 Conference, Penn State University, USA, (Note: 20-22 mars).
Ilinca, F., Hétu, J.F., Derdouri, A., Holmes, B., Scott, C., Stevenson, J. (2000), Three-Dimensional Modeling of Metal Powder Injection Molding, COM2000, Mathematical Modeling in Metal Processing and Manufacturing Symposium, Ottawa, (Note: 20-23 août).
Hétu, J.F., Ilinca, F., Audet, M. (2000), Numerical Simulation of Turbulent Mold Filling Problems, COM2000, Mathematical Modeling in Metal Processing and Manufacturing Symposium, Ottawa, (Note: 20-23 août).
Ilinca, F., Hétu, J.F., Derdouri, A., Holmes, B., Scott, C., Stevenson, J. (2000), 3D Simulation of Metal Injection Molding: Influence of Thermal and Inertial Effects on Flow Stability, 2000 International Conference on Powder Metallurgy & Particulate Materials, New York, (Note: 30 mai-3 juin).
Ilinca, F., Hétu, J.F., (2000), 3D Simulation of the Packing-Cooling Stage in Polymer Injection Molding, ANTEC 2000, Orlando, (Note: 7-11 mai).
Ilinca, F., Hétu, J.F. (2000), 3D Numerical Simulation of the Gas-Assisted Injection Molding Process, ANTEC 2000, Orlando, (Note: 7-11 mai).
llinca, F., Hétu, J.F., Derdouri, A., Holmes, B., Scott, C., Stevenson, J. (2000), Metal Injection Molding: Simulation of Three-dimensional Flow with Free Surface Boundary and Experimental Validation, ANTEC 2000, Orlando, (Note: 7-11 mai).
Turgeon, E., Pelletier, D., Borggaard, J. (2000), A Continuous Sensitivity Equation Approach to Optimal Design in Mixed Convection, Numerical Heat Transfer, Part A, 38, pp. 869-885.
Turgeon, E., Pelletier, D., Ignat, L. (2000), Effects of Adaptivity on Various finite Element Schemes for Turbulent Heat Transfer and Fluid Flow, Numerical Heat Transfert, Part A, 38, pp. 847-868.
Ilinca, F., Hétu, J.F., Pelletier, `D. (2000), On Stabilized Finite Element Formulations for Incompressisble Advective-Diffusive Transport and Fluid Flow Problems, CMAME, 188, pp. 235-255.
Ignat, L., Pelletier, D., Ilinca, F. (2000), A Universal Formulation of Two-equation Models for Adaptive Computation of Turbulent Flows, CMAME, 189(4), pp. 1119-1140.
Borggaard, J., Pelletier, D. (2000), A Continuous Sensitivity Equation method for conduction in composite materials and phase change Problems, Kluwer Publishers.
Turgeon, E., Pelletier, D., Borggaard, J. (2000), A General Continuous Sensitivity Equation Formulation for Complex Flows, AIAA 2000-4732, 8th AIAA Symposium on MDO, Long Beach, CA, (Note: September 6-8).
Turgeon, E., Pelletier, D., Borggaard, J. (2000), A Sensitivity Equation Method for Flows with Temperature Dependent Properties, AIAA 2000-4821, 8th AIAA Symposium on MDO, Long Beach, CA, (Note: September).
Zhang, X., Pelletier, D., Trépanier, J.Y., Camarero, R. (2000), Error estimation and control for the Euler Equations, AIAA 2000-2246, AIAA Fluid dynamics Conference, Denver, CO, (Note: June 20-24).
Lacasse, D., Turgeon, E., Pelletier, D. (2000), Two-equation models: Revenge of the Wall Functions, 8sth Annual Conference of the CFDSC, Montréal, (Note: June 11-13).
Turgeon, E., Pelletier, D., Borggaard, J. (2000), A General Purpose Sensitivity Equation Formulation for Complex Flows, 8th Annual Conference of the CFDSC, Montreal, (Note: June 11-13).
Pelletier, D, Borggaard, J. Hétu, J.F. (2000), A Continuous Sensitivity Equation Method for Conduction and Phase Change Problems, AIAA 2000-0881, 38th Aerospace Science Meeting, Reno, NV, (Note: January).
Borggaard, J., Pelletier, D., Turgeon, E. (2000), A Study of Optimal Cooling Strategies in Thermal Processes, AIAA 2000-0563, 38th Aerospace Sciences Meeting and Exhibit, Reno, NV, (Note: January 10-13).
Zhang, X., Pelletier, D., Trépanier, J.Y., Camarero, R. (2000), Verification of Error estimators for the Euler Equations, AIAA 2000-1001, 38th Aerospace Sciences Meeting, Reno, NV, (Note: January 10-13).
Dufour, S., Pelletier, D. (2000), A Transient Adaptive Finite Element Method for the Modeling of Drop Dynamics, 16th IMACS World Congress 2000, Lausanne, (Note: August 21-25).
Garon, A., Thienot, S., Farinas, M.I., Monette S.P. (2000), Design Tools for Rotary Blood pump, 8th Congresss of the International Society for Rotary Bloold pump, Eurogress Aachen, Germany, (Note: September 6-9).
Farinas, M.I., Thienot, S., Garon, A., Clément, B. (2000), Optimization of Hydraulic Seal Design in a VAD as an Enclosed-Impeller Axial Flow Blood Pump, 8e Conférence annuelle de la Société Conférence Canadienne de CFD (CFD2K), Montréal, (Note: June 11-13).
Farinas, M.I., Thienot, S., Garon, A. (2000), Hydraulic Seal Effect in the Design of a VAD as an Enclosed-Impeller Axial Flow Blood Pump, 11th International Conference on Mechanics in Medicine and Biology (ICMMB-11), Maui, (Note: April 2-5).
Gander, M.J., Nataf, F. (2000), AILU: A Preconditioner Based on the Analytic Factorization of the Elliptic Operator, Numerical Linear Algebra with Applications, 7(7-8), pp. 543-567.
Gander, M.J., Nataf, F. (2000), AILU for Helmholtz Problems: A new Preconditioner Based on an Analytic Factorization, C. R. Acad. Sci. Paris, t. 331(Série I), pp. 261-266.
Gander, M.J., Halpern, L., Nataf, F. (2000), Optimized Schwarz Methods, Proceedings of the 12th International Conference on Domain Decomposition, pp. 15-27.
Gander, M.J., Halpern, L., Nataf, F. (2000), Domain decomposition methods for wave propagation. Mathematical and numerical aspects of wave propagation, SIAM, Santiego de Compostela, pp. 310-314.
Gander, M.J., Meyer-Spasche, R. (2000), An Introduction to Numerical Integrators Preserving Physical Properties, Chapter in Applications of Nonstandard Finite Difference Schemes, R. E. Mickens editors, World Scientific, ISBN 981-02-4133-X.
Bernadou, M., Delfour, M.C. (2000), Intrinsic models of piezoelectric shells, Proceedings of ECCOMAS 2000 (European Congress on Computational Methods in Applied Sciences and Engineering, Barcelona, Spain, (Note: September 11-14).
Delfour, M.C., Zolesio, J.P. (2000), Velocity method and Courant metric topologies in shape analysis of partial differential equations, Control of Nonlinear Distributed Parameter Systems, G. Chen, Il Lasiecka and J. Zhou, eds, Marcel Dekker, New York (NSF Conference held in College Station, Texas, in honor of D.l. Russell's 60th anniversary), pp. 45-68.
Delfour, M.C. (2000), Tangential differential calculus and functional analysis on a C^{1,1} submanifold, Differential-geometric methods in the control of partial differential equations, R. Gulliver, W. Littman and R. Triggiani, eds, Contemporary Mathematics, AMS Pulications, Providence, R.I. 2000 (Proc. of the AMS-SIAM-IMA Summer Research Conference on Differential-Geometric Methods in the Control of Partial Differential Equations held in Boulder, Colorado, June 27-July 2, 1999), 268, pp. 83-115.
St-Hilaire, A., Sabourin, M., Deschênes, C. (2000), The Prediction of Cavitation Hydrodynamic Aggressiveness, 20th IAHR Symposium, Charlotte, North Carolina, (Note: August 6-9).
Deschênes, C., Lessard, V., Roy, C., Sévigny, J. (2000), OPUS: outils pédagogiques utiles en science, Une aide aux enseignants pour intéresser les filles du ssecondaire, Colloque Femmes, sciences et technologie, Congrès de l'Acfas, (Note: 15 mai).
Deschênes, C., Frize, C. (2000), Engineering as if the world mattered: A view from inside, Science as if the world mattered Conference (sur invitation), Ontario Institute for Studies in Education, U. of Toronto, (Note: May 9-12).
Deschênes, C., Foisy, M., Portelance, A. (2000), La problématique des femmes en sciences et génie au Canada, Colloque Femmes et sciences: Faire advenir le changement, Union Européenne (sur invitation), Bruxelles, Belgique, (Note: 3-4 avril).
Dossou, K., Charbonneau, A., Fontaine, M. (2000), Vectorial analysis of the bound modes of optical waveguides by an adaptive finite element method, ICIP/CIPI, Sainte-Foy, (Note: 12 juin).
Dossou, K., Charbonneau, A., Fontaine, M. (2000), Vectorial analysis of the bound modes of optical waveguides by an adaptive finite element method, ICIP/CIPI, Sainte-Foy, (Note: 12 juin).
Jullien, S., Garon, A., Bertrand, O.F., Mongrain, R. (2000), A Numerical Model for Local Delivery in Stent Design, Symposium Biomécanique Endocoronaire et Resténose, Groupe d'Hemodynamique de la Société Française de Cardiologie, Marseille, (Note: 7 avril).
Fourgeau, P., Garon, A., Kempenaars, M., Mongrain, R. (2000), Computation of Hyperbolic Equation for Hemolysis Rate bin finite Differences, 8e Conférence annuelle de la Société Conférence Canadienne de CFD, Montréal, (Note: 11-13 juin).
Jullian, S., Garon, A., Bertrand, O.F., Mongrain, R. (2000), FEM Algorithm for the Time-Integral Diffusion Transport for Local Delivery with Stent, 8th Conférence annuelle de la Société Conférence Canadienne de CFD, Montréal, (Note: 11-13 juin).
Julien, S., Garon, A., Mongrain, R., Bertrand, O. (2000), Transiant Simulation for Local Delivery in Stent Design, Eleventh International Conference on Mechanics in Medicine and Biology (ICMMB-11), Maui, (Note: April 2-5).
Dompierre, J., Labbé, P., Garon, A., Camarero, R. (2000), Unstructured tetrahedral Mesh Adaptation for Two-Dimensional Space-Time Finite Elements, AIAA 2000-0810, 38th Aerospace Sciences Meeting & Exhibit, Reno, NV, (Note: January 10-13).
N'Dri, D., Garon, A., Fortin, A. (2000), Stable Space-Time Formulation for the Navier-Stokes Equations, AIAA 2000-0394, 38th Aerospace Sciences Meeting & Exhibit, Reno, NV, (Note: January 10-13).
Guénette, R., Labbé, J. (2000), Iterative Solvers for Generalised Stokes Problems, VIII Annual conference of the CFD Society of Canada, Montréal.
Farhloul, M., Manouzi, H. (2000), On a mixed finite element method for the p-Laplacian, Canadian Applied Mathematics Quarterly(8), pp. 67-78.
Farhloul, M., Fortin, M. (2000), Review and complements on mixed-hybrid finite element methods for fluid flows, Proceedings of ICCAM-2000.
Tardieu, N., Tremblay, P. (2000), HMG, un solveur multigrille hybride algébrique-géométrique, Neuvième colloque national en calcul des tructures, 2 (Hermès), Giens, France, pp. 411-416.
Gendron, G., Picard, A., Guérin, M.-C. (1999), A Theoretical Study on Shear Strengthening of Reinforced Concrete Beams using Composites, Composites and Structures, 45(4), pp. 303-309.
Gendron, G., Pelletier, G., Fortin, M. (1999), Error Estimation and Mesh Adaptation for Plate Bending Problems, Comptes rendus du congrès Cancam 99, Hamilton, pp. 303-304.
Gendron, G., Fortin, M. (1999), Error Estimates and Mesh Refinement Procedures for 2D Elasticity and Plate Bending Problems, US National Congress on Computational Mechanics, Boulder, Colorado, pp. p. 367.
Tessler, A., Annett, M.S., Gendron, G. (1999), A Higher-Order Theory Accounting for Through-Thickness Thermoelastic Deformation in Thick Composite and Sandwich Plates, ASME Mechanics and Materials Conference, Blacksburg, Va, USA.
Gendron, G. (1999), La mise en action des étudiants, une stratégie pour l’apprentissage de l’analyse des structures en génie civil, Congrès de l’Association internationale de pédagogie universitaire, Montréal, pp. 125-127.
Gendron, G., Anctil, F., Arsenault, L. (1999), Le travail en équipe : définition et mise en œuvre de son apprentissage en génie civil, Congrès de l’Association internationale de pédagogie universitaire, Montréal, pp. 120-122.
Dano, M.-L., Gendron, G., Picard, A. (1999), Elastic properties of a carbon fiber triaxial woven fabric, CANCAM ’99, Hamilton, pp. 19-20.
Dano, M.-L., Gendron, G., Picard, A. (1999), Comportement mécanique d’un matériau composite à tissage triaxial, Journée des étudiants du GIREF, Québec, (Note: octobre).
Defo, M., Fortin, Y., Cloutier, A. (1999), Experimental determination of the effective water conductivity of sugar maple sapwood and white spruce heartwood under vacuum, Wood Fiber Sci., 31(4), pp. 343-359.
Defo, M., Fortin, Y., Cloutier, A. (1999), Moisture content – water potential relationship of sugar maple and white spruce wood from green to dry conditions, Wood Fiber Sci., 31(1), pp. 62-70.
Tremblay, C., Cloutier, A., Grandjean, B. (1999), Experimental determination of the ratio of vapour diffusion to the total water movement in wood during drying, Wood Fiber Sci., 31(3), pp. 235-248.
Blanchet, P., Cloutier, A., Riedl, B. (1999), Particleboard from black spruce bark residues, Forest Products Society 53rd Annual Meeting, Boise, Idaho, (Note: 27 juin).
Faraji, A., Cardou, A., Gakwaya, A. (1999), Effect of arbitrarily directed tangential force on elastic contacting bodies, ASCE Journal of Engineering Mechanics, 125(11), pp. 1324-1326.
Dammak, F., Chamlal, S., Gakwaya, A., Dhatt, G. (1999), Un élément de coque simple à trois noeuds en grandes rotations et élastoplasticité, American Mathematical Society Publication - CRM Proc. & Lecture Notes, 21, pp. 95-108.
Yazdani, A., Gakwaya, A., Dhatt, G. (1999), On the post-processing techniques for elastoplastic axisymmetrical problems, International Journal of Computational Mechanics, 24, pp. 14-28.
Gakwaya, A., Chtourou, H., Guillot, M. (1999), Theoretical and practical aspects of metal powder compaction process, Integrated design and manufacturing in mechanical engineering, J.L. Batoz et coll. éd., Kluwer Academic Publishers, pp. 283-290, (Note: chap. 5).
Ghazerddine, F., Ibrahimbegovic, A., Chorfi, L., Gakwaya, A. (1999), Formulation des théories de la plasticité et de la viscoplasticité en grandes déformations dans les axes principaux, 4e Colloque national en calcul des structures, Giens, France, (Note: mai).
Volat, C., Farzaneh, M., Gakwaya, A. (1999), Calcul numérique de la distribution du potentiel et du champ électrique le long des surfaces de glace recouvrant un isolateur H.T. et dans les intervalles entre celles-ci, Colloque sur le givrage atmosphérique, CIGEL, ACFAS, Ottawa.
Dupuis, M., Lacroix, R. (1999), Development of a 2D+ dynamic model of an aluminium reduction cell, 38th Annual Conference of Metallurgists and 29th Annual Hydrometallurgical Meeting, Québec, (Note: 22-26 août).
Guénette, R., Pierre, R. (1999), Three-dimensional finite element method for viscoelastic fluid flow problems, XIth International workshop on numerical methods for viscoelastic flows, Vaols, Netherlands, (Note: 25-28 août).
Heuzey, M.-C., Fortin, A., Dealy, J.-M. (1999), Simulation of the Viscoelastic Flow of Molten Plastics, The Society of Rheology, Madison, WI, pp. 7, (Note: octobre).
Heuzey, M.-C., Fortin, A., Dealy, J.-M. (1999), Simulation de l'écoulement viscoélastique des polymères fondus, Société canadienne de mathématiques appliquées et industrielles, 20e rencontre annuelle, Québec, (Note: juin).
Roy, C., Beaulieu, D., Bastien, J. (1999), Évaluation du potentiel d'utilisation de l'aluminium dans les ouvrages d'art, 6e colloque sur la progression de la recherche portant sur les ouvrages d'art, Québec, pp. 2-1, 2-8, (Note: 4-5 mai).
Fourcade, E., Bertrand, F., Réglat, O., Tanguy, P.A. (1999), Finite Element Analysis of Fluid-Solid Interaction in the Metering Nip of a Metering Size Press, Comp. Meth. Appl. Mech. Eng., 174, pp. 235-245.
Bertand, F., Tanguy, P.A., Brito de la Fuente, E., Carreau, P. (1999), Numerical Modeling of the Mixing Flow of Second-Order Fluids with Helical Ribbon Impellers, special issue on Advances in Computational Methods for Non-Newtonian Flows, Comp. Meth. Appl. Mecha. Eng., 180, pp. 267-280.
Tanguy, P.A., Bertrand, F., Thibault, F., Galy-Jammou, P. (1999), Simulation of Kneading Mechanisms in a Three-Blade Planery Mixer, 3rd International Sumposium on Mixing in Industrial Processes, Osaka, Japan.
Ritz, J.-B., Bertrand, F., Thibault, F., Tanguy, P.A. (1999), Numerical Modeling of Shear-Induced Migration in a Short-Dwell Coater, 20th Annual Meeting of the Canadian Applied and Industrial Mathematical Society, Québec.
Tanguy, P.A., Alonso, S., Réglat, O., Bertrand, F. (1999), Process Viscosity in a Film Coater, International Symposium on Paper Coating Coverage, Helsinki.
Bourgault, Y., Habashi, W.G., Dompierre, J., Baruzzi, G.S. (1999), A Finite Element Method Study of Eulerian Droplets Impingement Models, International Journal for Numerical Meethods in Fluids, 29, pp. 429-449.
Habashi, W.G., Bourgault, Y. (1999), A new PDE-based Icing Model in FENSAP-ICE, Canadian Aeronautics and Space Institute, 7th CASI Aerodynamics Symposium, Montréal, (Note: May 2-5).
Bourgault, Y., Beaugendre, H., Habashi, W.G. (1999), Development of a Shallow Water Icing Model in FENSAP-ICE, AIAA PAPERE 99-0246, 37th AIAA Aerospace Science Meeting and Exhibit, Reno, NV, (Note: January).
Farhloul, M.,Nicaise, S., Paquet, L. (1999), A mixed finite element method of Boussinesq equations: Some numerical results, CFD 99 Proceedings: The Seventh Conference of the CFD Society of Canada, 4:33-4:38.
Farhloul, M., Fortin, M. (1999), A mixed nonconforming finite element for the elasticity and Stokes problems, Mathematical Models & Methods in Applied Sciences, 9, pp. 1179-1199.
Ben Salah, N., Soulaïmani, A., Habashi, W.G., Fortin, M. (1999), A conservative stabilized finite element method for the magneto-hydrodynamic equations, Int. J. for Numerical Methods in Fluids, 29, pp. 535-554.
Samson, É., Marchand, J., Robert, J.-L., Bournazel, J.-P. (1999), Modelling ion diffusion transport mechanisms in porous media, International Journal for Numerical Methods in Engineering, 46, pp. 2043-2060.
Salah Bel Hadj Kacem, M., Chevallier, J.-J., Robert, J.-L., Gold, C. (1999), Intégration de la méthode des éléments finis dans un système s'information hydrologique pour la gestion stratégique des eaux de surface, Revue internationale de géomatique.
Corns, R., DeBlois, F., Mongrain, R., Julien, S., Garon, A., Bertrand, O.F. (1999), Influence of isotope release on the dosimetry of a novel radioactive stent concept, Medical Physics, 26(55).
Farinas, M.-L., Garon, A., St-Louis, K., Lacroix, M. (1999), Étude du transfert de chaleur dans un espace annulaire rhombique horizontal avec et sans ailettes, International Journal of Numeerical Heat Transfer, 42, pp. 3905-3917.
Leclerc, M. (1999), Conservation flows practices in the North-American continent, Atelier conjoint entre la Section Échohydraulique et la Section Éducation permanente de l'Association internationale de recherche hydrauliques (AIRH)lors du Congrès général, Graz, Autriche, (Note: août).
Le Roux, D. (1999), , 5th Workshop on Computational Methods for Oceanic, Atmospheric and Ground water Flows, Trento, Italie, (Note: septembre).
Alain, D. (1999), MEF++ Programmation d'un algorithme d'extrusion de maillage de la dimension 2 vers la dimension 3, pp. 24.
Deslauriers, M., Lamontagne, L., Lemay, J., Maciel, Y., Dumas, G. (1999), Airfoil Testing in Wind Tunnels: Velocity control and Measurement in Presence of End-Plates, Proc. 7th Aero. Symp. Canadian Aeronautics and Space Institute, Montréal, (Note: May).
Lamontagne, L., Dumas, G., Delauriers, M., Lemay, J., Maciel, Y. (1999), On the Drag Measurement of Airfoils at Low Re Numbers, Proc. 7th Aero. Symp., Canadian Aeronautics and Space Institute, Montréal, pp. 435-436, (Note: May).
Beaudoin, G., Therrien, R. (1999), Sources and drains: majors controls of hydrothermal fluid flow in the Kokanee range, BC, Canada, Geology, 27(10), pp. 883-886.
Lepage, N., Hamel, P., Lefebvre, R., Therrien, R., Blais, C. (1999), Decision analysis for leachate control at a fractured rock landfill, Ground Water Monitoring and Remediation, 19(3), pp. 157-170.
Brouyère, S., Dassargues, A., Therrien, R., Sudicky, E.A. (1999), Modelling of dual porosity media: comparisons of different techniques and evaluation of the impact on plume transport simulations, International Conference on Calibration and reliability in groundwater modelling, Zürich, pp. 22-27, (Note: September 20-23).
Couto, L.C., Fortin, Y., Doucet, J., Riedl, B., Couto, L. (1999), Efeito da temperatura de extraçao no rendimento e no teor de taninos condensados da casca de barbatimao, Revista Arvore, 23(3), pp. 333-339.
Derome, D., Fortin, Y. (1999), Détermination des coefficienets de transfert convectif de masse et de chaleur pour le transfert d'humidité sous un patelage de toit en bois, Compte rendu du IVe colloque interuniversitaire franco-québécois sur la thermique des systèmes à température modérée, Montréal, pp. 301-308, (Note: 25-27 mai).
Bustos, C., Hernandez, R., Fortin, Y. (1999), Comportement à l'usinage du bois d'épinette blanche de plantation, Proceedings of the 14th International Wood Machining Seminar, Paris-Épinal-Cluny, (Note: 12-19 septembre).
François, V., Cuillière, J.C. (1999), Méthodes de maillage automatique appliquées à la modification de modèle, Revue Européenne des éléments finis, 8(4), pp. 433-454.
François, V., Cuillìère, J.C., Gueury, M. (1999), Automatic meshing and remeshing in the simultaneous engineering context, Research in Engineering Design, 11, pp. 55-66.
François, V., Cuillière, J.C., Gueury, M. (1999), Automatic meshing and remeshing applied to model modifications, 3th International Conference on the Industrial Automation, Montréal, (Note: 7-9 juin).
Hétu, J.F., Ilinca, F. (1999), A Finite Element Method for Casting Simulations, Numerical Heat Transfer, Part A applications, 36(7), pp. 657-679.
Kabanemi, K.K., Hétu, J.F., (1999), Modelling and Simulation of nonisothermal Effects in Injection Molding of Rigid Fiber Suspensions, Journal of Injection Molding Technology, 3(2), pp. 80-87.
Audet, M., Hétu, J.F., Ilinca, F., Bramley, R. (1999), Parallel Finite Element Simulation of 3D Mold-Filling Problems, 13th Annual International Symposium on High-Performance Computing Systems and Applications, Kingston.
Salloum, G., Hétu, J.F., Kabanemi, K., Ilinca, F., Perrault, M. (1999), Filling and Solidification Simulations: What a Difference 3D Makes, Western Plastics Conference '99, Palm Beach.
Kabanemi, K.K., Hétu, J.F. (1999), Modelling and Simulation of nonisothermal Effects in Injection Molding of rigid Fiber Suspensions, ANTEC 1999.
Pelletier, D. (1999), Adaptive Computation of Complex Flows Special issue of IJNMF: 10th International Conference on Finite Element in Flow problems, IJNMF, 31, pp. 189-202.
Ilinca, F., Pelletier, D. (1999), Positivity preserving formulation for two-equation models of Turbulence, International Journal of Thermal Sciences, 38(7), pp. 560-572.
Farinas, M.I., Garon, A., St-Louis, K., Lacroix, M. (1999), Étude du transfert de chaleur dans un espace annulaire rhombique horizontal avec et sans ailettes, International Journal of Numerical Heat, 42, pp. 3905-3917.
Steiner, A., Gander, M.J. (1999), Parametrische Lösungen der Räuber-Beute-Gleichungen im Vergleich, Il Volterriano 7, Liceo Cantonale e Biblioteca Cantonale di Mendrisio, pp. 32-44.
Steiner, A., Pini, F., Gander, M.J. (1999), Selezione e convivenza in sistemi Darwiniani, Il Volterriano 7, Lice Cantonale e Biblioteca Cantonale di Mendrisio, pp. 15-31.
Gander, M.J., Halpern, L., Nataf, F. (1999), Optimal Convergence for Overlapping and Non-Overlapping Schwarz Waveform Relaxation, Proceedings of the 11th International Conference on Domain Decomposition, pp. 27-36.
Delfour, M.C., (1999), Characterization of the space of solution of the membrane shell equation for arbitrary C^{1,1) midsurfaces}, Control and Cybernetics, 28(3), pp. 481-501.
Delfour, M.C. (1999), Membrane shell equation: characterization of the space of solutions, Control of Distributed Parameter and Stochastic Systems, S. Chen, X. Li, J. Yong, X.Y. Zhou, eds, Chapman and Hall New York (IFIP Conference, Hangzhou, China June 1998), (Note: 21-29).
Delfour, M.C. (1999), Intrinsic P(2,1)thin shell model and Naghdi's models without a priori assumption on the stress tensor, Optimal Control of Partial Differential Equations, K.H. Hoffmann, G. Leugering, F. Tröltzsch, eds, pp. 99-113.
Delfour, M.C., Zolesio, J.P. (1999), Hidden boundary smoothness in hyperbolic tangential problems on nonsmooth domains, Systems modelling and optimization (Res. Notes Math., vol. 396, Chapman & Hall/CRC, Boca Raton, FL, pp. 53-61.
Deschênes, C. (1999), Le développement des ingénieurs au plan professionnel, Colloque Femmes, sciences et technologie, Congrès de l' Acfas à Ottawa, (Note: 12 mai).
Foisy, M., Deschênes, C. (1999), Portrait statistique des femmes en sciences et en génie au Canada, Colloque Femmes, sciences et technologie, Congrès de l'Acfas, Ottawa, (Note: 12 mai).
Deschênes, C., Foisy, M., (1999), Five University Chairs for Promoting Science and Engineering for Women in Canada, Women's Worlds 99 congress, section XI on Gender, Science and Technology ( sur invitation), Kvinnforsk University of Tromso, Norvège, (Note: juin).
Le Roux, D., Staniforth, A., Lin, C.A. (1998), Finite elements for shallow water equation ocean models, Monthly Weather Review, 126, pp. 1931-1951.
Dano, M.-L., Hyer, M. W. (1998), Thermally-Induced Deformation Behavior of Unsymmetric Laminates, International Journal of Solids and Structures, 35(17), pp. 2101-2120.
Aouina,M., Bousmina, M., Guénette, R. (1998), Theorical predictions of reological behavior for immiscible polymer blends undergoing high deformation flows, The Polymer Processing Society, Toronto, (Note: 17-19 août).
Koran, F.A., Heuzey, M.-C., Dealy, J.-M. (1998), Evaluation of the Viscosity Pressure Coefficient Using Two Methods, The Society of Rheology, 70th Annual Meeting, Montery, CA, (Note: octobre).
Lapointe, M., Secretan, Y., Driscoll, S., Bergeron, N., Leclerc, M. (1998), Response of the Ha! Ha! River to the flood of July, 1996, in the Saguenay Region of Québec: Large-scale avulsion in a glaciated valley, Water Resources Research, 34(9), pp. 2383-2392.
Secretan, Y., Leclerc, M. (1998), MODELEUR: A 2d hydrodynamic G.I.S. and simulation sofware, Hydroinformatics 98, Copenhagen, (Note: août).
Bastien, J., St-Pierre, C. (1998), L'enseignement et l'apprentissage des mathématiques appliquées par l'intermédiaire du WWWW, Association pour les applications pédagogiques de l'ordinateur au postsecondaire (APOP), Ste-Foy, (Note: juin).
Lachemi, M., Bastien, J. Adeline, R., Ballivy, G., Aïtcin, P.C. (1998), Behavior of the world's first reactive powder concrete bridge, 5th International conference on short and medium span bridges, Calgary, (Note: July).
Massicotte, B., Michaud, M.-C., Bastien, J. (1998), Time deformation in precast concrete girders with cast-in-place deck, 5th International conference on short and medium span bridges, Calgary, (Note: July).
Bastien, J., St-Pierre, C. (1998), L'utilisation des NTIC dans l'enseignement et l'apprentissage des mathématiques, Conférence annuelle de l'Association canadienne française pour l'avancement des sciences (ACFAS), Québec, (Note: mai).
Bastien, J., St-Pierre, C. (1998), Un outil pédagogique pour l'enseignement et l'apprentissage des mathématiques de l'ingénieur, Conférence internationale NTICF'98 (New Technologies of Information and Communication), INSA-Rouen, France, (Note: 18, 19, 20 novembre).
Tanguy, P.A., Bertrand, F., Thibault, F., Fages, F., et autres (1998), Mécanismes de malaxage dans un malaxeur bipale à mouvement planétaire: simulation numérique 3D et étude expérimentale par traçage fluorimétrique, Récents progrès en génie des procédés, 61, Nancy, pp. 43-48.
de la Villéon, J., Bertrand, F., Tanguy, P.A., & al.et autres (1998), Numerical Investigation of Mixing Efficiency of Helical Ribbons, AIChE J., 44, pp. 972-977.
Vidal, D., Bertrand, F., Tanguy, P.A. (1998), Numerical Simulation of the Hydrodynamics in a Short-Dwell Coater, Chem. Eng. Sci., 53, pp. 1991-2003.
Tanguy, P.A., Bertrand, F., Brito de la Fuente, E., Carreau, P.J. (1998), The Effect of Elasticity on the Mixing of Boger Fluids with Helical Ribbons, AIChE Annual Meeting, Miami.
Hayes, R.E., Bertrand, F., Kolaczkowski, S.T. (1998), Determining Catalytic Combustion Kinetics from Reactor Light-off Curves, 48th Canadian Chemical Engineering Conference, London, Ontario.
Bertrand, F., Tanguy, P.A. (1998), Three-Dimensional Time-Dependant Fictitious Domain Methods, SIAM Annual Meeting, Toronto.
Fourcade, E., Bertrand, F., Tanguy, P.A. (1998), Numerical Modeling of the Hydrodynamics in the Metering Nip of a Film Coater, CFD 98, Québec.
Ritz, J.B., Bertrand, F., Thibault, F., Tanguy, P.A. (1998), Numerical Modeling of Shear-Induced Particle Migration in a Film Coater, CFD 98, Québec.
Fourcade, E., Bertrand, F., Tanguy, P.A. (1998), Effect of Coating Rheology in the Metering Nip of a Film Coater, CPPA Annual Meeting, Montréal.
Bourgault, Y., Beaugendre, H., Habashi, W.G., et autres (1998), FENSAP-ICE: A new Equilibrium Model for Ice Accretion, including Film Runback and Conjugate Heat Transfer, Fourth ECCOMAS Computational Fluid Dnamics Conference, 1, Athens, Grece, pp. 723-728, (Note: September).
Habashi, W. G., Bourgault, Y., Boutanios, Z., & al. (1998), Puting Computer on Ice: A CFD Integrated Approach to the In-Flight Icing Problem, Fourth ECCOMAS Computational Fluid Dynamics Conference, 2, Athens, Grece, pp. 512-517, (Note: September).
Elkadri, N.E., Soulaimani, A., Deschênes, C. (1998), A robust finite element formulation for computational fluid dynamics, IASTED International Conference on Applied Modelling and Simulation, (Note: 12-14 août).
St-Hilaire, A., Sabourin, A., Deschênes, C. (1998), The Prediction of Cavitation in Hydraulic Turbines by CFD, XIXe IAHR Symposium, section on Hydraulic Machinery and Cavitation, Singapour, (Note: 9-11 septembre).
Bouziane, S., Deschênes, C. (1998), Experimental Investigation of Performance Characteristics and Flow Behavior through a Propeller Microturbine, The International Journal on Waterpower and Dams, 5(4).
Farhloul, M. (1998), A mixed finite element method for a nonlinear Dirichlet problem, IMA Journal of Numerical Analysis, 19, pp. 121-132.
Habashi, W.G., Dompierre, J., Bourgault, Y., Fortin, M., Vallet, M.G. (1998), Certifiable computational flouid mechanics through mesh optimization, AIAA J., 36, pp. 703-711.
Robert, J.-L., Khelifi, M., Ghanmi, A. (1998), Use of 2D mixing length distribution to correctly predict trubulent flows in irregular domain, Revue canadienne de Génie civil, 25, pp. 232-240.
Mongrain, R., Kandarpa, K., Garon, A., Bertrand, O., Bertrand, M. (1998), Study of Catheter Designs and Drug Mixing Processes Using Numerical Simulations, Journal of International Federation for Medical and Biological Engineering: Medical and Biological engineering and Computing.
Morin, J., Leclerc, M. (1998), From pristine to present state: hydrology evolution of Lake Saint-François, St-Lawrence River, Revue canadienne de Génie civil, 25, pp. 864-879.
Morin, J., Secretan, Y., Leclerc, M. (1998), Hydrodynamic modeling of pristine Lake Saint-François, St. Lawrence river: cumulative anthropic impact, Conférence annuelle conjointe GAC-MAC, Québec, (Note: 18-20 mai).
Le Roux, D. (1998), , European Geophysical Society (EGS), Nice, France, (Note: avril).
Le Roux, D. (1998), , European Geophysical Society (EGS), Nice, France, (Note: avril).
Le Roux, D. (1998), , 4th Workshop on Computational Methods for Oceanic, Atmospheric and Ground-water Flows, Denver, USA, (Note: août-septembre).
Gendron, G., Tessler, A. (1998), A {1-2}-Order Thermoelastic Theory for Composite and Sandwich Plates and its Validation, CADCOMP98, Montréal, (Note: août).
Dufresne, L., Dumas, G. (1998), A 3-D Spectral/Finite Element Method for the Simulation of the Wake Vortices Hydrodynamic Instabilities, CAS Journal, 44(4), pp. 223-230.
Dufresne, L., Dumas, G. (1998), A Special Finite Element Radial Discretization for a Navier-Stokes Solver in Cylindrical Coordinates, Proc. of CFD98, Québec, pp. VIII-123-128, (Note: June).
Hamdi, Y., Robert, J.L., Therrien, R. (1998), Terrain, surface runoff and groundwater flows modeling, Proc. of the 4th annual conference of the International Association for Mathematical Geology(Part 1), Isola d'Ischia, Italy, pp. 278-285.
Nastev, M., Lefebvre, R., Therrien, R., Gélinas, P.J. (1998), Numerical modeling of landfill gas production and migration with a N2-H2O-CO2-CH4 system and a production function, TOUGH workshop'98, Lawrence Berkeley National Laboratory, Berkeley, California, (Note: May 4-6).
C. Béraudo, A. Fortin, T. Coupez, Y. Demay, B. Vergnes, and J. F. Agassant. (1998), A finite element method for computing the flow of multi-mode viscoelastic fluids: comparison with experiments., Journal of Non-Newtonian Fluid Mechanics, 75(1), pp. 1-23.
A. Béliveau, A. Fortin, and Y. Demay. (1998), A two-dimensional numerical method for the deformation of drops with surface tension., International Journal of Computational Fluid Dynamics, 10(3), pp. 225-240.
Giguère, P., Dumas, G., Lemay, J. (1997), Gurney Flap Scaling for Optimum Lift-to-Drag Ratio, AIAA Journal, 35(12), pp. 1888-1890.
Dumas, G., (1997), On the Large-Gap Classification in Spherical Couette Flow, ASME FEDSM'97-3322, Seperated and Complex Flows Symp., (Note: June).
Bibeau, L.P., Dumas, G. (1997), On the Kelvin-Helmholtz Instability of Curved Mixing Layers, Proc. 16th Can. Congr. of Applied Mech., Québec, pp. 299-300, (Note: juin).
Dufresne, L., Dumas, G. (1997), A 3-D Spectral/Finite Element Method for the Simulation of the Wake Vortices Hydrodynamic Instabilities, Proc. 6th Aero. Symp., Canadian Aeronautics and Space Institute, Toronto, pp. 197, (Note: April).
Dufresne, L., Dumas, G. (1997), A Spectral/Finite Element Method for the Simulation of 3-D Incompressible Flows in Unbounded Domains, Proc. 16th Can. Congress of Applied Mech., Québec, pp. 303-304, (Note: Juin).
Lepage, N., Hamel, P., Lefebvre, R., Therrien, R., Blais, C. (1997), Evaluation of leachate hydraulic control options at a large landfill site in fractured rock using groundwater flow modelling and decision analysis, Conférence Americana '97, Montréal, Québec, (Note: Mars).
A. Fortin, M. Jardak, R. Pierre, and J.-J. Gervais. (1997), Localization of Hopf bifurcations in fluid flow problems., International Journal for Numerical Methods in Fluids, 24(11), pp. 1185-1210.
A. Fortin, P. Carrier, and Y. Demay. (1995), Numerical simulation of coextrusion and film casting., International Journal for Numerical Methods in Fluids, 20(1), pp. 31-57.
A. Fortin, M. Jardak, J. J. Gervais, and R. Pierre. (1994), Old and new results on the two-dimensional Poiseuille flow., Journal of Computational Physics, 115(2), pp. 455-469.
J. F. Agassant, A. Fortin, and Y. Demay. (1994), Prediction of stationary interfaces in coextrusion flows., Polymer Engineering & Science, 34(14), pp. 1101-1108.
Hétu J.-F., Fortin A., Pelletier D. (1994), An a posteriori error estimator for the Navier-Stokes equations, Revue européenne des éléments finis, 3(3), pp. 363--377.
Pelletier, Dominique and Zaki, Ali and Fortin, André (1994), Adaptive remeshing for hyperbolic transport problems, International journal of computational fluid dynamics, 3(2), pp. 79-99.
Fortin A., Demay Y., Agassant J.F. (1993), Calcul des surfaces libres au moyen d'une équation de transport, Actes du colloque en l'honneur du Professeur Jean Céa,, Cépaduès éditions, pp. p.~133-144.
Fortin A., Zine A. (1992), An Improved GMRES Method for Solving Viscoelastic Fluid Flow Problems, Journal of Non-Newtonian Fluid Mechanics, 48, pp. 1-18.
Fortin A., Demay Y., Agassant J.F. (1992), Computation of Stationary Interfaces Between Generalized Newtonian Fluids, Revue européenne des éléments finis, 1(2), pp. 181-196.
Fortin A., Zine A., Agassant J.F. (1992), Computing Viscoelastic Fluid Flow Problems at Low Cost, Journal of Non-Newtonian Fluid Mechanics, 45(2), pp. 187-208.
Fortin A., Fortin M., Gervais J.J. (1991), Complex Transition to Chaotic Flow in a Periodic Array of Cylinders, Theoritical and Computational Fluid Dynamics, 3, pp. 79-93.
Fortin A., Côté D., Tanguy P. (1991), On the Imposition of Friction Boundary Conditions for the Numerical Simulation of Bingham Fluid Flows, Computer Methods in Applied Mechanics and Engineering, 88, pp. 97-109.
Brezzi, F., Fortin, M. (1991), Mixed and hybrid finite element methods, Theory and applications, Springer-Verlag.
Fortin A., Fortin M. (1990), A Preconditioned GMRES Method for the Numerical Simulation of Viscoelastic Fluid Flows, Journal of Non-Newtonian Fluid Mechanics, 36, pp. 277-288.
El Hadj M., Tanguy P., Fortin A. (1990), A Numerical Comparison of Two Decoupled Methods for the Simulation of Viscoelastic Fluid Flows, Rheologica Acta, 29, pp. ~342-351.
Fortin M., Fortin A. (1989), A New Approach for the FEM Simulation of Viscoelastic Flows, Journal of Non-Newtonian Fluid Mechanics, 32, pp. 295-310.
Pelletier D., Fortin A., Camarero R. (1989), Are FEM Solutions of Incompressible Flows Really Incompressible? or how simple flows can cause headaches., International Journal for Numerical Methods in Fluids, 9(1), pp. 99-112.
Fortin M., Fortin A. (1989), Une note sur les méthodes de caractéristiques et de Lesaint-Raviart pour les problèmes hyperboliques stationnaires, RAIRO (M2AN), 23(4), pp. 593-596.
Fortin A. (1988), On the Imposition of a Flowrate by an Augmented Lagrangian Method, Communications in Applied Numerical Methods, 4, pp. 835-841.
Tanguy P., Bertrand J.F., Fortin A. (1988), A 3-D Finite Element Model for Polymer Melt Flow, Advances in Polymer Technology, 8, pp. 99-113.
Fortin A., Fortin M., Gervais J.J (1987), A Numerical Simulation of the Transition to Turbulence in a Two-Dimensional Flow, Journal of Computational Physics, 70(2), pp. 295-310.
Tanguy P.A., Fortin A. (1986), A Finite Element Simulation of Polymer Melt Flows, Advances in Polymer Technology, 6(4), pp. 501-508.
Fortin A., Fortin M., Tanguy, P.A. (1986), Numerical Simulation of Viscous Flows in Hydraulic Turbomachinery by the Finite Element Method, Computer Methods in Applied Mechanics and Engineering, 58(3), pp. 337-358.
Fortin M., Fortin A. (1985), Newer and Newer Elements for Incompressible Flow,, dans Finite Elements in Fluids, 6, Gallagher, Carey, Oden et Zienkiewicz, John Wiley and Sons Ltd., pp. 171-187.
Fortin M., Fortin A. (1985), A Generalization of Uzawa's Algorithm for the Solution of the Navier-Stokes Equations, Communications in Applied Numerical Method, 1, pp. 205-208.
Fortin, Michel (1985), A 3D quadratic nonconforming element, Numerishe Mathematik, 46(2), pp. 269--279.
Fortin M., Fortin A.} (1985), Experiments with Several Elements for Viscous Incompressible Flows, International Journal for Numerical Methods in Fluids, 5, pp. 911-928.
Fortin, M., Glowinski, R. (1983), Méthodes de lagrangien augmenté, Dunod, Paris.
Fortin, Michel (1983), A non-conforming piecewise quadatic finite element on triangles, Int. J. Num. Meth. Eng, 19(4), pp. 505-520.
Fortin, M., Glowinski, R. (1982), Augmented Lagrangian Methods, North Holland, Amsterdam.
Le Roux, D. (0), A New Triangular Finite Element with Optimum Constraint Ratio ofr Compressible Flows, SIAMS J. Sci. Comput..