Content-type: text/html Manpage of QHOST

QHOST

Section: Sun Grid Engine User Commands (1)
Updated: 2001/07/20 08:18:59
Index Return to Main Contents
 

NAME

qhost - show the status of Sun Grid Engine hosts, queues, jobs  

SYNTAX

qhost [ -F [resource_name,...] [ -help ] [ -h host_list ] [ -j ] [ -l resource=val,... ] [ -u user,... ]  

DESCRIPTION

qhost shows the current status of the available Sun Grid Engine hosts, queues and the jobs associated with the queues. Selection options allow you to get information about specific hosts, queues, jobs or users. Without any option qhost will display a list of all hosts without queue or job information.

 

OPTIONS

-F [ resource_name,... ]
qhost will present a detailed listing of the current resource availability per host with respect to all resources (if the option argument is omitted) or with respect to those resources contained in the resource_name list. Please refer to the description of the Full Format in section OUTPUT FORMATS below for further detail.
-help
Prints a listing of all options.
-h host_list
Prints a list of all hosts contained in host_list.
-j
Prints all jobs running on the queues hosted by the shown hosts. This switch calls -q implicitly.
-l resource[=value],...
Defines the resources required by the hosts on which information is requested. Matching is performed on hosts.
-q
Show information about the queues hosted by the displayed hosts.
-u user,...
Display information only on those jobs and queues being associated with the users from the given user list.
 

OUTPUT FORMATS

Depending on the presence or absence of the -q or -F and -j option three output formats need to be differentiated. PP  

Default Format (without -q, -F and -j)

Following the header line a line is printed for each host consisting of
*
the Hostname
*
the Architecture.
*
the Number of processors.
*
the Load.
*
the Total Memory.
*
the Used Memory.
*
the Total Swapspace.
*
the Used Swapspace.

If the -q option is supplied, each host status line also contains extra lines for every queue hosted by the host consisting of,

*
the queue name.
*
the queue type - one of B(atch), I(nteractive), C(heckpointing), P(arallel), T(ransfer) or combinations thereof,
*
the number of used and available job slots,
*
the state of the queue - one of u(nknown) if the corresponding cannot be contacted, a(larm), A(larm), C(alendar suspended), s(uspended), S(ubordinate), d(isabled), D(isabled), E(rror) or combinations thereof.

If the state is a(alarm) at least one of the load thresholds defined in the load_thresholds list of the queue configuration (see is currently exceeded, which prevents from scheduling further jobs to that queue.

As opposed to this, the state A(larm) indicates that at least one of the suspend thresholds of the queue (see is currently exceeded. This will result in jobs running in that queue being successively suspended until no threshold is violated.

The states s(uspended) and d(isabled) can be assigned to queues and released via the command. Suspending a queue will cause all jobs executing in that queue to be suspended.

The states D(isabled) and C(alendar suspended) indicate that the queue has been disabled or suspended automatically via the calendar facility of Sun Grid Engine (see while the S(ubordinate) state indicates, that the queue has been suspend via subordination to another queue (see for details). When suspending a queue (regardless of the cause) all jobs executing in that queue are suspended too.

If an E(rror) state is displayed for a queue, on that host was unable to locate the executable on that host in order to start a job. Please check the error logfile of that for leads on how to resolve the problem. Please enable the queue afterwards via the -c option of the command manually.

If the -F option was used, resource availability information is printed following the host status line. For each resource (as selected in an option argument to -F or for all resources if the option argument was omitted) a single line is displayed with the following format:

*
a one letter specifier indicating whether the current resource availability value was dominated by either
`g' - a cluster global,
`h' - a host total or
*
a second one letter specifier indicating the source for the current resource availability value, being one of
`l' - a load value reported for the resource,
`L' - a load value for the resource after administrator defined load scaling has been applied,
`c' - availability derived from the consumable resources facility (see
`v' - a default complexes configuration value never overwritten by a load report or a consumable update or
`f' - a fixed availability definition derived from a non-consumable complex attribute or a fixed resource limit.
*
after a colon the name of the resource on which information is displayed.
*
after an equal sign the current resource availability value.

The displayed availability values and the sources from which they derive are always the minimum values of all possible combinations. Hence, for example, a line of the form "qf:h_vmem=4G" indicates that a queue currently has a maximum availability in virtual memory of 4 Gigabyte, where this value is a fixed value (e.g. a resource limit in the queue configuration) and it is queue dominated, i.e. the host in total may have more virtual memory available than this, but the queue doesn't allow for more. Contrarily a line "hl:h_vmem=4G" would also indicate an upper bound of 4 Gigabyte virtual memory availability, but the limit would be derived from a load value currently reported for the host. So while the queue might allow for jobs with higher virtual memory requirements, the host on which this particular queue resides currently only has 4 Gigabyte available.

After the queue status line (in case of -j) a single line is printed for each job running currently in this queue. Each job status line contains

*
the job ID,
*
the job name,
*
the job owner name,
*
the status of the job - one of t(ransfering), r(unning), R(estarted), s(uspended), S(uspended) or T(hreshold) (see the Reduced Format section for detailed information),
*
the start date and time and the function of the job (MASTER or SLAVE - only meaningful in case of a parallel job) and
*
the priority of the jobs.
 

ENVIRONMENTAL VARIABLES

SGE_ROOT
Specifies the location of the Sun Grid Engine standard configuration files.
SGE_CELL
If set, specifies the default Sun Grid Engine cell. To address a Sun Grid Engine cell qstat uses (in the order of precedence):

The name of the cell specified in the environment variable SGE_CELL, if it is set.

The name of the default cell, i.e. default.

SGE_DEBUG_LEVEL
If set, specifies that debug information should be written to stderr. In addition the level of detail in which debug information is generated is defined.
COMMD_PORT
If set, specifies the tcp port on which is expected to listen for communication requests. Most installations will use a services map entry instead to define that port.
COMMD_HOST
If set, specifies the host on which the particular to be used for Sun Grid Engine communication of the qstat client resides. Per default the local host is used.
 

FILES


<sge_root>/<cell>/common/act_qmaster
                Sun Grid Engine master host file
 

SEE ALSO

 

COPYRIGHT

See for a full statement of rights and permissions.

 

Index

NAME
SYNTAX
DESCRIPTION
OPTIONS
OUTPUT FORMATS
Default Format (without -q, -F and -j)
ENVIRONMENTAL VARIABLES
FILES
SEE ALSO
COPYRIGHT
This document was created by man2html, using the manual pages.
Time: 17:34:14 GMT, September 12, 2003